mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-24 04:34:22 +08:00
doc: Update CapsuleUpdate READMEs
Since we removed embeddingg the capsule key into a .dtb and fixed authenticated capsule updates for all boards, move the relevant documentation in the efi file and update it accordingly Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This commit is contained in:
Ilias Apalodimas
Heinrich Schuchardt
parent
f86caab058
commit
316ab801c0
@ -1,203 +0,0 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0+
|
||||
.. Copyright (C) 2020, Linaro Limited
|
||||
|
||||
Enabling UEFI Capsule Update feature
|
||||
------------------------------------
|
||||
|
||||
Support has been added for the UEFI capsule update feature which
|
||||
enables updating the U-Boot image using the UEFI firmware management
|
||||
protocol (fmp). The capsules are not passed to the firmware through
|
||||
the UpdateCapsule runtime service. Instead, capsule-on-disk
|
||||
functionality is used for fetching the capsule from the EFI System
|
||||
Partition (ESP) by placing the capsule file under the
|
||||
\EFI\UpdateCapsule directory.
|
||||
|
||||
Currently, support has been added on the QEMU ARM64 virt platform for
|
||||
updating the U-Boot binary as a raw image when the platform is booted
|
||||
in non-secure mode, i.e. with CONFIG_TFABOOT disabled. For this
|
||||
configuration, the QEMU platform needs to be booted with
|
||||
'secure=off'. The U-Boot binary placed on the first bank of the NOR
|
||||
flash at offset 0x0. The U-Boot environment is placed on the second
|
||||
NOR flash bank at offset 0x4000000.
|
||||
|
||||
The capsule update feature is enabled with the following configuration
|
||||
settings::
|
||||
|
||||
CONFIG_MTD=y
|
||||
CONFIG_FLASH_CFI_MTD=y
|
||||
CONFIG_CMD_MTDPARTS=y
|
||||
CONFIG_CMD_DFU=y
|
||||
CONFIG_DFU_MTD=y
|
||||
CONFIG_PCI_INIT_R=y
|
||||
CONFIG_EFI_CAPSULE_ON_DISK=y
|
||||
CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y
|
||||
CONFIG_EFI_CAPSULE_FIRMWARE=y
|
||||
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
|
||||
CONFIG_EFI_CAPSULE_FMP_HEADER=y
|
||||
|
||||
In addition, the following config needs to be disabled(QEMU ARM specific)::
|
||||
|
||||
CONFIG_TFABOOT
|
||||
|
||||
The capsule file can be generated by using the tools/mkeficapsule::
|
||||
|
||||
$ mkeficapsule --raw <u-boot.bin> --index 1 <capsule_file_name>
|
||||
|
||||
As per the UEFI specification, the capsule file needs to be placed on
|
||||
the EFI System Partition, under the \EFI\UpdateCapsule directory. The
|
||||
EFI System Partition can be a virtio-blk-device.
|
||||
|
||||
Before initiating the firmware update, the efi variables BootNext,
|
||||
BootXXXX and OsIndications need to be set. The BootXXXX variable needs
|
||||
to be pointing to the EFI System Partition which contains the capsule
|
||||
file. The BootNext, BootXXXX and OsIndications variables can be set
|
||||
using the following commands::
|
||||
|
||||
=> efidebug boot add -b 0 Boot0000 virtio 0:1 <capsule_file_name>
|
||||
=> efidebug boot next 0
|
||||
=> setenv -e -nv -bs -rt -v OsIndications =0x04
|
||||
=> saveenv
|
||||
|
||||
Finally, the capsule update can be initiated with the following
|
||||
command::
|
||||
|
||||
=> efidebug capsule disk-update
|
||||
|
||||
The updated U-Boot image will be booted on subsequent boot.
|
||||
|
||||
Enabling Capsule Authentication
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
The UEFI specification defines a way of authenticating the capsule to
|
||||
be updated by verifying the capsule signature. The capsule signature
|
||||
is computed and prepended to the capsule payload at the time of
|
||||
capsule generation. This signature is then verified by using the
|
||||
public key stored as part of the X509 certificate. This certificate is
|
||||
in the form of an efi signature list (esl) file, which is embedded as
|
||||
part of the platform's device tree blob using the mkeficapsule
|
||||
utility.
|
||||
|
||||
On the QEMU virt platforms, the device-tree is generated on the fly
|
||||
based on the devices configured. This device tree is then passed on to
|
||||
the various software components booting on the platform, including
|
||||
U-Boot. Therefore, on the QEMU virt platform, the signatute is
|
||||
embedded on an overlay. This overlay is then applied at runtime to the
|
||||
base platform device-tree. Steps needed for embedding the esl file in
|
||||
the overlay are highlighted below.
|
||||
|
||||
The capsule authentication feature can be enabled through the
|
||||
following config, in addition to the configs listed above for capsule
|
||||
update::
|
||||
|
||||
CONFIG_EFI_CAPSULE_AUTHENTICATE=y
|
||||
|
||||
The public and private keys used for the signing process are generated
|
||||
and used by the steps highlighted below::
|
||||
|
||||
1. Install utility commands on your host
|
||||
* OPENSSL
|
||||
* efitools
|
||||
|
||||
2. Create signing keys and certificate files on your host
|
||||
|
||||
$ openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=CRT/ \
|
||||
-keyout CRT.key -out CRT.crt -nodes -days 365
|
||||
$ cert-to-efi-sig-list CRT.crt CRT.esl
|
||||
|
||||
$ openssl x509 -in CRT.crt -out CRT.cer -outform DER
|
||||
$ openssl x509 -inform DER -in CRT.cer -outform PEM -out CRT.pub.pem
|
||||
|
||||
$ openssl pkcs12 -export -out CRT.pfx -inkey CRT.key -in CRT.crt
|
||||
$ openssl pkcs12 -in CRT.pfx -nodes -out CRT.pem
|
||||
|
||||
The capsule file can be generated by using the GenerateCapsule.py
|
||||
script in EDKII::
|
||||
|
||||
$ ./BaseTools/BinWrappers/PosixLike/GenerateCapsule -e -o \
|
||||
<capsule_file_name> --monotonic-count <val> --fw-version \
|
||||
<val> --lsv <val> --guid \
|
||||
e2bb9c06-70e9-4b14-97a3-5a7913176e3f --verbose \
|
||||
--update-image-index <val> --signer-private-cert \
|
||||
/path/to/CRT.pem --trusted-public-cert \
|
||||
/path/to/CRT.pub.pem --other-public-cert /path/to/CRT.pub.pem \
|
||||
<u-boot.bin>
|
||||
|
||||
Place the capsule generated in the above step on the EFI System
|
||||
Partition under the EFI/UpdateCapsule directory
|
||||
|
||||
For embedding the public key certificate, the following steps need to
|
||||
be followed::
|
||||
|
||||
1. Generate a skeleton overlay dts file, with a single fragment
|
||||
node and an empty __overlay__ node
|
||||
|
||||
A typical skeleton overlay file will look like this
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
/ {
|
||||
fragment@0 {
|
||||
target-path = "/";
|
||||
__overlay__ {
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
2. Convert the dts to a corresponding dtb with the following
|
||||
command
|
||||
./scripts/dtc/dtc -@ -I dts -O dtb -o <ov_dtb_file_name> \
|
||||
<dts_file>
|
||||
|
||||
3. Run the dtb file generated above through the mkeficapsule tool
|
||||
in U-Boot
|
||||
./tools/mkeficapsule -O <pub_key.esl> -D <ov_dtb>
|
||||
|
||||
Running the above command results in the creation of a 'signature'
|
||||
node in the dtb, under which the public key is stored as a
|
||||
'capsule-key' property. The '-O' option is to be used since the
|
||||
public key certificate(esl) file is being embedded in an overlay.
|
||||
|
||||
The dtb file embedded with the certificate is now to be placed on an
|
||||
EFI System Partition. This would then be loaded and "merged" with the
|
||||
base platform flattened device-tree(dtb) at runtime.
|
||||
|
||||
Build U-Boot with the following steps(QEMU ARM64)::
|
||||
|
||||
$ make qemu_arm64_defconfig
|
||||
$ make menuconfig
|
||||
Disable CONFIG_TFABOOT
|
||||
Enable CONFIG_EFI_CAPSULE_AUTHENTICATE
|
||||
Enable all configs needed for capsule update(listed above)
|
||||
$ make all
|
||||
|
||||
Boot the platform and perform the following steps on the U-Boot
|
||||
command line::
|
||||
|
||||
1. Enable capsule authentication by setting the following env
|
||||
variable
|
||||
|
||||
=> setenv capsule_authentication_enabled 1
|
||||
=> saveenv
|
||||
|
||||
2. Load the overlay dtb to memory and merge it with the base fdt
|
||||
|
||||
=> fatload virtio 0:1 <$fdtovaddr> EFI/<ov_dtb_file>
|
||||
=> fdt addr $fdtcontroladdr
|
||||
=> fdt resize <size_of_ov_dtb_file>
|
||||
=> fdt apply <$fdtovaddr>
|
||||
|
||||
3. Set the following environment and UEFI boot variables
|
||||
|
||||
=> setenv -e -nv -bs -rt -v OsIndications =0x04
|
||||
=> efidebug boot add -b 0 Boot0000 virtio 0:1 <capsule_file_name>
|
||||
=> efidebug boot next 0
|
||||
=> saveenv
|
||||
|
||||
4. Finally, the capsule update can be initiated with the following
|
||||
command
|
||||
|
||||
=> efidebug capsule disk-update
|
||||
|
||||
On subsequent reboot, the platform should boot the updated U-Boot binary.
|
||||
@ -277,6 +277,131 @@ Enable ``CONFIG_OPTEE``, ``CONFIG_CMD_OPTEE_RPMB`` and ``CONFIG_EFI_MM_COMM_TEE`
|
||||
|
||||
[1] https://optee.readthedocs.io/en/latest/building/efi_vars/stmm.html
|
||||
|
||||
Enabling UEFI Capsule Update feature
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
Support has been added for the UEFI capsule update feature which
|
||||
enables updating the U-Boot image using the UEFI firmware management
|
||||
protocol (FMP). The capsules are not passed to the firmware through
|
||||
the UpdateCapsule runtime service. Instead, capsule-on-disk
|
||||
functionality is used for fetching the capsule from the EFI System
|
||||
Partition (ESP) by placing the capsule file under the
|
||||
\EFI\UpdateCapsule directory.
|
||||
|
||||
The directory \EFI\UpdateCapsule is checked for capsules only within the
|
||||
EFI system partition on the device specified in the active boot option
|
||||
determined by reference to BootNext variable or BootOrder variable processing.
|
||||
The active Boot Variable is the variable with highest priority BootNext or
|
||||
within BootOrder that refers to a device found to be present. Boot variables
|
||||
in BootOrder but referring to devices not present are ignored when determining
|
||||
active boot variable.
|
||||
Before starting a capsule update make sure your capsules are installed in the
|
||||
correct ESP partition or set BootNext.
|
||||
|
||||
Performing the update
|
||||
*********************
|
||||
|
||||
Since U-boot doesn't currently support SetVariable at runtime there's a Kconfig
|
||||
option (CONFIG_EFI_IGNORE_OSINDICATIONS) to disable the OsIndications variable
|
||||
check. If that option is enabled just copy your capsule to \EFI\UpdateCapsule.
|
||||
|
||||
If that option is disabled, you'll need to set the OsIndications variable with::
|
||||
|
||||
=> setenv -e -nv -bs -rt -v OsIndications =0x04
|
||||
|
||||
Finally, the capsule update can be initiated either by rebooting the board,
|
||||
which is the preferred method, or by issuing the following command::
|
||||
|
||||
=> efidebug capsule disk-update
|
||||
|
||||
**The efidebug command is should only be used during debugging/development.**
|
||||
|
||||
Enabling Capsule Authentication
|
||||
*******************************
|
||||
|
||||
The UEFI specification defines a way of authenticating the capsule to
|
||||
be updated by verifying the capsule signature. The capsule signature
|
||||
is computed and prepended to the capsule payload at the time of
|
||||
capsule generation. This signature is then verified by using the
|
||||
public key stored as part of the X509 certificate. This certificate is
|
||||
in the form of an efi signature list (esl) file, which is embedded as
|
||||
part of U-Boot.
|
||||
|
||||
The capsule authentication feature can be enabled through the
|
||||
following config, in addition to the configs listed above for capsule
|
||||
update::
|
||||
|
||||
CONFIG_EFI_CAPSULE_AUTHENTICATE=y
|
||||
CONFIG_EFI_CAPSULE_KEY_PATH=<path to .esl cert>
|
||||
|
||||
The public and private keys used for the signing process are generated
|
||||
and used by the steps highlighted below::
|
||||
|
||||
1. Install utility commands on your host
|
||||
* OPENSSL
|
||||
* efitools
|
||||
|
||||
2. Create signing keys and certificate files on your host
|
||||
|
||||
$ openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=CRT/ \
|
||||
-keyout CRT.key -out CRT.crt -nodes -days 365
|
||||
$ cert-to-efi-sig-list CRT.crt CRT.esl
|
||||
|
||||
$ openssl x509 -in CRT.crt -out CRT.cer -outform DER
|
||||
$ openssl x509 -inform DER -in CRT.cer -outform PEM -out CRT.pub.pem
|
||||
|
||||
$ openssl pkcs12 -export -out CRT.pfx -inkey CRT.key -in CRT.crt
|
||||
$ openssl pkcs12 -in CRT.pfx -nodes -out CRT.pem
|
||||
|
||||
The capsule file can be generated by using the GenerateCapsule.py
|
||||
script in EDKII::
|
||||
|
||||
$ ./BaseTools/BinWrappers/PosixLike/GenerateCapsule -e -o \
|
||||
<capsule_file_name> --monotonic-count <val> --fw-version \
|
||||
<val> --lsv <val> --guid \
|
||||
e2bb9c06-70e9-4b14-97a3-5a7913176e3f --verbose \
|
||||
--update-image-index <val> --signer-private-cert \
|
||||
/path/to/CRT.pem --trusted-public-cert \
|
||||
/path/to/CRT.pub.pem --other-public-cert /path/to/CRT.pub.pem \
|
||||
<u-boot.bin>
|
||||
|
||||
Place the capsule generated in the above step on the EFI System
|
||||
Partition under the EFI/UpdateCapsule directory
|
||||
|
||||
Testing on QEMU
|
||||
***************
|
||||
|
||||
Currently, support has been added on the QEMU ARM64 virt platform for
|
||||
updating the U-Boot binary as a raw image when the platform is booted
|
||||
in non-secure mode, i.e. with CONFIG_TFABOOT disabled. For this
|
||||
configuration, the QEMU platform needs to be booted with
|
||||
'secure=off'. The U-Boot binary placed on the first bank of the NOR
|
||||
flash at offset 0x0. The U-Boot environment is placed on the second
|
||||
NOR flash bank at offset 0x4000000.
|
||||
|
||||
The capsule update feature is enabled with the following configuration
|
||||
settings::
|
||||
|
||||
CONFIG_MTD=y
|
||||
CONFIG_FLASH_CFI_MTD=y
|
||||
CONFIG_CMD_MTDPARTS=y
|
||||
CONFIG_CMD_DFU=y
|
||||
CONFIG_DFU_MTD=y
|
||||
CONFIG_PCI_INIT_R=y
|
||||
CONFIG_EFI_CAPSULE_ON_DISK=y
|
||||
CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y
|
||||
CONFIG_EFI_CAPSULE_FIRMWARE=y
|
||||
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
|
||||
CONFIG_EFI_CAPSULE_FMP_HEADER=y
|
||||
|
||||
In addition, the following config needs to be disabled(QEMU ARM specific)::
|
||||
|
||||
CONFIG_TFABOOT
|
||||
|
||||
The capsule file can be generated by using the tools/mkeficapsule::
|
||||
|
||||
$ mkeficapsule --raw <u-boot.bin> --index 1 <capsule_file_name>
|
||||
|
||||
Executing the boot manager
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user