spi: fsl: Use BIT macro

Replace numerical bit shift with BIT macro
in fsl_*spi.c

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: York Sun <yorksun@freescale.com>
Cc: Haikun Wang <Haikun.Wang@freescale.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
This commit is contained in:
Jagan Teki 2015-10-23 01:37:18 +05:30
parent 431a9f0286
commit 29e6abd94b
3 changed files with 13 additions and 13 deletions

View File

@ -24,7 +24,7 @@
DECLARE_GLOBAL_DATA_PTR;
/* fsl_dspi_platdata flags */
#define DSPI_FLAG_REGMAP_ENDIAN_BIG (1 << 0)
#define DSPI_FLAG_REGMAP_ENDIAN_BIG BIT(0)
/* idle data value */
#define DSPI_IDLE_VAL 0x0

View File

@ -32,26 +32,26 @@ struct fsl_spi_slave {
#define ESPI_MAX_CS_NUM 4
#define ESPI_FIFO_WIDTH_BIT 32
#define ESPI_EV_RNE (1 << 9)
#define ESPI_EV_TNF (1 << 8)
#define ESPI_EV_DON (1 << 14)
#define ESPI_EV_TXE (1 << 15)
#define ESPI_EV_RNE BIT(9)
#define ESPI_EV_TNF BIT(8)
#define ESPI_EV_DON BIT(14)
#define ESPI_EV_TXE BIT(15)
#define ESPI_EV_RFCNT_SHIFT 24
#define ESPI_EV_RFCNT_MASK (0x3f << ESPI_EV_RFCNT_SHIFT)
#define ESPI_MODE_EN (1 << 31) /* Enable interface */
#define ESPI_MODE_EN BIT(31) /* Enable interface */
#define ESPI_MODE_TXTHR(x) ((x) << 8) /* Tx FIFO threshold */
#define ESPI_MODE_RXTHR(x) ((x) << 0) /* Rx FIFO threshold */
#define ESPI_COM_CS(x) ((x) << 30)
#define ESPI_COM_TRANLEN(x) ((x) << 0)
#define ESPI_CSMODE_CI_INACTIVEHIGH (1 << 31)
#define ESPI_CSMODE_CP_BEGIN_EDGCLK (1 << 30)
#define ESPI_CSMODE_REV_MSB_FIRST (1 << 29)
#define ESPI_CSMODE_DIV16 (1 << 28)
#define ESPI_CSMODE_CI_INACTIVEHIGH BIT(31)
#define ESPI_CSMODE_CP_BEGIN_EDGCLK BIT(30)
#define ESPI_CSMODE_REV_MSB_FIRST BIT(29)
#define ESPI_CSMODE_DIV16 BIT(28)
#define ESPI_CSMODE_PM(x) ((x) << 24)
#define ESPI_CSMODE_POL_ASSERTED_LOW (1 << 20)
#define ESPI_CSMODE_POL_ASSERTED_LOW BIT(20)
#define ESPI_CSMODE_LEN(x) ((x) << 16)
#define ESPI_CSMODE_CSBEF(x) ((x) << 12)
#define ESPI_CSMODE_CSAFT(x) ((x) << 8)

View File

@ -68,7 +68,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define QSPI_CMD_SE_4B 0xdc /* Sector erase (usually 64KiB) */
/* fsl_qspi_platdata flags */
#define QSPI_FLAG_REGMAP_ENDIAN_BIG (1 << 0)
#define QSPI_FLAG_REGMAP_ENDIAN_BIG BIT(0)
/* default SCK frequency, unit: HZ */
#define FSL_QSPI_DEFAULT_SCK_FREQ 50000000
@ -383,7 +383,7 @@ static void qspi_enable_ddr_mode(struct fsl_qspi_priv *priv)
/* Enable the module again (enable the DDR too) */
reg |= QSPI_MCR_DDR_EN_MASK;
/* Enable bit 29 for imx6sx */
reg |= (1 << 29);
reg |= BIT(29);
qspi_write32(priv->flags, &regs->mcr, reg);
}