mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-24 20:54:24 +08:00
Code Issues Packages Projects Releases Wiki Activity

imx: ventana: add GW5910 support

Browse Source 
The GW5910 is a Single Board Computer based on the NXP i.MX6Q/DL SoC
with the following features:
 - DDR3 DRAM
 - NAND FLASH (256MiB or 2048MiB)
 - microSD socket
 - Gateworks System Periperhal Controller
 - front panel LED's
 - front panel pushbutton
 - RS232 connector (2x UARTs)
 - Digital I/O connector (I2C/GPIO)
 - SPI connector
 - u-blox Zoe-M8Q GPS
 - LIS2DE12 Accellerometer
 - TI CC1352 ARM Cortex-M4 multiprotocol sub-1GHz / 2.4GHz wireless MCU
 - On-board brcmfmac WiFi and BT module
 - RGMII RJ45 GbE
 - 1x MiniPCIe socket with PCIe/USB 2.0
 - 1x MiniPCIe socket with USB 2.0 and nanoSIM socket
 - Passive PoE and wide-range DC power supply

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
This commit is contained in:
Tim Harvey 2021-07-24 10:40:42 -07:00 committed by Stefano Babic
parent 2d02586028
commit 25805401ff
3 changed files with 50 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

47
board/gateworks/gw_ventana/common.c
View File

@ -19,6 +19,7 @@
#include <power/pmic.h>
#include <power/ltc3676_pmic.h>
#include <power/pfuze100_pmic.h>
#include <power/mp5416.h>
#include "common.h"
@ -420,6 +421,19 @@ static iomux_v3_cfg_t const gw5905_gpio_pads[] = {
IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
};
static iomux_v3_cfg_t const gw5910_gpio_pads[] = {
/* SD3_VSELECT */
IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG),
/* RS232_EN# */
IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG),
/* RF_RESET# */
IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG),
/* RF_BOOT */
IOMUX_PADS(PAD_GPIO_8__GPIO1_IO08 | DIO_PAD_CFG),
/* PCIESKT_WDIS# */
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
};
/* Digital I/O */
struct dio_cfg gw51xx_dio[] = {
{
@ -1029,6 +1043,18 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
.mezz_pwren = IMX_GPIO_NR(2, 19),
.mezz_irq = IMX_GPIO_NR(2, 18),
},
/* GW5910 */
{
.gpio_pads = gw5910_gpio_pads,
.num_pads = ARRAY_SIZE(gw5910_gpio_pads) / 2,
.dio_cfg = gw52xx_dio,
.dio_num = ARRAY_SIZE(gw52xx_dio),
.wdis = IMX_GPIO_NR(7, 12),
.rs232_en = GP_RS232_EN,
.vsel_pin = IMX_GPIO_NR(6, 14),
.mmc_cd = IMX_GPIO_NR(7, 0),
},
};
#define SETUP_GPIO_OUTPUT(gpio, name, level) \
@ -1181,6 +1207,11 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info)
*/
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(4, 8), "touch_rst", 1);
break;
case GW5910:
/* CC1352 */
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 7), "rf_reset#", 1);
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 8), "rf_boot", 1);
break;
}
}
@ -1423,6 +1454,21 @@ void setup_pmic(void)
pmic_reg_write(p, LTC3676_BUCK3, 0xc0);
pmic_reg_write(p, LTC3676_BUCK4, 0xc0);
}
/* configure MP5416 PMIC */
else if (!i2c_probe(0x69)) {
puts("PMIC: MP5416\n");
switch (board) {
case GW5910:
/* SW1: VDD_ARM 1.2V -> (1.275 to 1.475) */
reg = MP5416_VSET_EN | MP5416_VSET_SW1_SVAL(1475000);
i2c_write(0x69, MP5416_VSET_SW1, 1, (uint8_t *)&reg, 1);
/* SW4: VDD_SOC 1.2V -> (1.350 to 1.475) */
reg = MP5416_VSET_EN | MP5416_VSET_SW4_SVAL(1475000);
i2c_write(0x69, MP5416_VSET_SW4, 1, (uint8_t *)&reg, 1);
break;
}
}
}
#include <fdt_support.h>
@ -1570,6 +1616,7 @@ int board_mmc_init(struct bd_info *bis)
case GW53xx:
case GW54xx:
case GW553x:
case GW5910:
/* usdhc3: 4bit microSD */
SETUP_IOMUX_PADS(usdhc3_pads);
usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;

2
board/gateworks/gw_ventana/eeprom.c
View File

@ -124,6 +124,8 @@ read_eeprom(int bus, struct ventana_board_info *info)
type = GW5908;
else if (info->model[4] == '0' && info->model[5] == '9')
type = GW5909;
else if (info->model[4] == '1' && info->model[5] == '0')
type = GW5910;
break;
default:
printf("EEPROM: Unknown model in EEPROM: %s\n", info->model);

1
board/gateworks/gw_ventana/ventana_eeprom.h
View File

@ -121,6 +121,7 @@ enum {
GW5907,
GW5908,
GW5909,
GW5910,
GW_UNKNOWN,
GW_BADCRC,
};