mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-26 05:34:30 +08:00
Code Issues Packages Projects Releases Wiki Activity

sunxi: A64: Update .dts/.dtsi files

Browse Source 
Update the .dts/.dtsi file from the Linux sunxi/dt64-for-4.20 tree:
commit 679294497be31596e1c9c61507746d72b6b05f26
Author: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz>
Date:   Wed Sep 26 19:48:24 2018 +0000
    arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
This commit is contained in:
Andre Przywara 2018-10-29 00:56:47 +00:00 committed by Jagan Teki
parent 2f13cf35d2
commit 1b39a1834e
9 changed files with 920 additions and 45 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

168
arch/arm/dts/sun50i-a64-amarula-relic.dts
View File

@ -22,11 +22,11 @@
stdout-path = "serial0:115200n8";
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc 1>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
};
};
@ -34,10 +34,34 @@
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_dcdc1>;
/*
* Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but
* dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with
* 0Ohm register to vcc-io-wifi so eldo1 is used.
*/
vqmmc-supply = <&reg_eldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&r_pio>;
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* WL-WAKE-AP: PL3 */
interrupt-names = "host-wake";
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
@ -48,9 +72,138 @@
status = "okay";
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
};
};
#include "axp803.dtsi"
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "avdd-csi";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi-dsi-sensor";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-mipi";
};
&reg_dldo3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "dovdd-csi";
};
&reg_dldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-io";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&reg_eldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_eldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "dvdd-csi";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
@ -61,5 +214,6 @@
&usbphy {
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
usb0_vbus-supply = <&reg_drivevbus>;
status = "okay";
};

34
arch/arm/dts/sun50i-a64-bananapi-m64.dts
View File

@ -60,6 +60,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
@ -86,6 +97,10 @@
};
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -103,6 +118,17 @@
status = "okay";
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@ -151,7 +177,7 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
@ -296,9 +322,13 @@
regulator-name = "vcc-rtc";
};
&simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

89
arch/arm/dts/sun50i-a64-nanopi-a64.dts
View File

@ -51,12 +51,44 @@
compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
blue {
label = "nanopi-a64:blue:status";
gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
};
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc 1>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
&de {
status = "okay";
};
&ehci0 {
@ -67,6 +99,26 @@
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dcdc1>;
status = "okay";
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
/* i2c1 connected with gpio headers like pine64, bananapi */
&i2c1 {
pinctrl-names = "default";
@ -78,6 +130,13 @@
bias-pull-up;
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <7>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@ -88,6 +147,24 @@
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
rtl8189etv: wifi@1 {
reg = <1>;
interrupt-parent = <&r_pio>;
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
interrupt-names = "host-wake";
};
};
&ohci0 {
status = "okay";
};
@ -125,9 +202,9 @@
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
@ -195,9 +272,13 @@
regulator-name = "vcc-rtc";
};
&simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

103
arch/arm/dts/sun50i-a64-olinuxino.dts
View File

@ -51,6 +51,7 @@
compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
@ -58,12 +59,74 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
status = "okay";
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dcdc1>;
allwinner,tx-delay-ps = <600>;
status = "okay";
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@ -92,6 +155,14 @@
};
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&r_rsb {
status = "okay";
@ -100,6 +171,7 @@
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
};
};
@ -142,10 +214,14 @@
/* DCDC3 is polyphased with DCDC2 */
/*
* The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
* 1.35V that the PMIC can drive.
*/
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-min-microvolt = <1360000>;
regulator-max-microvolt = <1360000>;
regulator-name = "vcc-ddr3";
};
@ -180,6 +256,11 @@
regulator-name = "vcc-wifi-io";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -214,8 +295,24 @@
regulator-name = "vcc-rtc";
};
&simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
status = "okay";
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
};

179
arch/arm/dts/sun50i-a64-orangepi-win.dts
View File

@ -1,5 +1,6 @@
/*
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
* Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@ -51,23 +52,127 @@
compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
};
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
status {
label = "orangepi:green:status";
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
};
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
status = "okay";
};
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
status = "okay";
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
};
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_gmac_3v3>;
status = "okay";
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
disable-wp;
bus-width = <4>;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_dldo2>;
vqmmc-supply = <&reg_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
};
&ohci0 {
status = "okay";
};
@ -89,9 +194,8 @@
#include "axp803.dtsi"
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "afvcc-csi";
};
@ -163,12 +267,23 @@
regulator-name = "vcc-wifi-io";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_eldo3 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1800000>;
regulator-name = "dvdd-csi";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@ -191,13 +306,65 @@
regulator-name = "vcc-rtc";
};
&simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
&spi0 {
status = "okay";
spi-flash@0 {
compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
m25p,fast-read;
status = "okay";
};
};
/* On debug connector */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
/* Bluetooth */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
/* On Pi-2 connector, RTS/CTS optional */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
/* On Pi-2 connector, RTS/CTS optional */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "disabled";
};
/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
status = "disabled";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};

32
arch/arm/dts/sun50i-a64-pine64.dts
View File

@ -62,6 +62,21 @@
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
};
&de {
status = "okay";
};
&ehci0 {
@ -82,6 +97,17 @@
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@ -229,6 +255,10 @@
regulator-name = "vcc-rtc";
};
&simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
/* On Euler connector */
&spdif {
status = "disabled";
@ -237,7 +267,7 @@
/* On Exp and Euler connectors */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

32
arch/arm/dts/sun50i-a64-sopine-baseboard.dts
View File

@ -61,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
reg_vcc1v8: vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8";
@ -69,6 +80,10 @@
};
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -86,6 +101,17 @@
status = "okay";
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
@ -134,9 +160,13 @@
regulator-name = "vcc-wifi";
};
&simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

15
arch/arm/dts/sun50i-a64-sopine.dtsi
View File

@ -45,6 +45,8 @@
#include "sun50i-a64.dtsi"
#include <dt-bindings/gpio/gpio.h>
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@ -52,6 +54,7 @@
non-removable;
disable-wp;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
@ -66,6 +69,18 @@
};
};
&spi0 {
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
};
};
#include "axp803.dtsi"
&reg_aldo2 {

313
arch/arm/dts/sun50i-a64.dtsi
View File

@ -43,9 +43,12 @@
*/
#include <dt-bindings/clock/sun50i-a64-ccu.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/sun50i-a64-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
#include <dt-bindings/reset/sun8i-r-ccu.h>
/ {
interrupt-parent = <&gic>;
@ -57,17 +60,21 @@
#size-cells = <1>;
ranges;
/*
* The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU.
* However there is no support for this clock on A64 yet, so we depend
* on the upstream clocks here to keep them (and thus CLK_MIXER0) up.
*/
simplefb_lcd: framebuffer-lcd {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "mixer0-lcd0";
clocks = <&ccu CLK_TCON0>,
<&ccu CLK_DE>, <&ccu CLK_BUS_DE>;
<&display_clocks CLK_MIXER0>;
status = "disabled";
};
simplefb_hdmi: framebuffer-hdmi {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "mixer1-lcd1-hdmi";
clocks = <&display_clocks CLK_MIXER1>,
<&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
status = "disabled";
};
};
@ -81,6 +88,7 @@
device_type = "cpu";
reg = <0>;
enable-method = "psci";
next-level-cache = <&L2>;
};
cpu1: cpu@1 {
@ -88,6 +96,7 @@
device_type = "cpu";
reg = <1>;
enable-method = "psci";
next-level-cache = <&L2>;
};
cpu2: cpu@2 {
@ -95,6 +104,7 @@
device_type = "cpu";
reg = <2>;
enable-method = "psci";
next-level-cache = <&L2>;
};
cpu3: cpu@3 {
@ -102,7 +112,20 @@
device_type = "cpu";
reg = <3>;
enable-method = "psci";
next-level-cache = <&L2>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
de: display-engine {
compatible = "allwinner,sun50i-a64-display-engine";
allwinner,pipelines = <&mixer0>,
<&mixer1>;
status = "disabled";
};
osc24M: osc24M_clk {
@ -168,10 +191,92 @@
#size-cells = <1>;
ranges;
de2@1000000 {
compatible = "allwinner,sun50i-a64-de2";
reg = <0x1000000 0x400000>;
allwinner,sram = <&de2_sram 1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1000000 0x400000>;
display_clocks: clock@0 {
compatible = "allwinner,sun50i-a64-de2-clk";
reg = <0x0 0x100000>;
clocks = <&ccu CLK_DE>,
<&ccu CLK_BUS_DE>;
clock-names = "mod",
"bus";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
};
mixer0: mixer@100000 {
compatible = "allwinner,sun50i-a64-de2-mixer-0";
reg = <0x100000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER0>,
<&display_clocks CLK_MIXER0>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_MIXER0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer0_out: port@1 {
reg = <1>;
mixer0_out_tcon0: endpoint {
remote-endpoint = <&tcon0_in_mixer0>;
};
};
};
};
mixer1: mixer@200000 {
compatible = "allwinner,sun50i-a64-de2-mixer-1";
reg = <0x200000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER1>,
<&display_clocks CLK_MIXER1>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_MIXER1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer1_out: port@1 {
reg = <1>;
mixer1_out_tcon1: endpoint {
remote-endpoint = <&tcon1_in_mixer1>;
};
};
};
};
};
syscon: syscon@1c00000 {
compatible = "allwinner,sun50i-a64-system-controller",
"syscon";
compatible = "allwinner,sun50i-a64-system-control";
reg = <0x01c00000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
sram_c: sram@18000 {
compatible = "mmio-sram";
reg = <0x00018000 0x28000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00018000 0x28000>;
de2_sram: sram-section@0 {
compatible = "allwinner,sun50i-a64-sram-c";
reg = <0x0000 0x28000>;
};
};
};
dma: dma-controller@1c02000 {
@ -185,6 +290,75 @@
#dma-cells = <1>;
};
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun50i-a64-tcon-lcd",
"allwinner,sun8i-a83t-tcon-lcd";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
clock-names = "ahb", "tcon-ch0";
clock-output-names = "tcon-pixel-clock";
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon0_in_mixer0: endpoint@0 {
reg = <0>;
remote-endpoint = <&mixer0_out_tcon0>;
};
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
tcon1: lcd-controller@1c0d000 {
compatible = "allwinner,sun50i-a64-tcon-tv",
"allwinner,sun8i-a83t-tcon-tv";
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON1>;
reset-names = "lcd";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon1_in: port@0 {
reg = <0>;
tcon1_in_mixer1: endpoint {
remote-endpoint = <&mixer1_out_tcon1>;
};
};
tcon1_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon1_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon1>;
};
};
};
};
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
@ -227,6 +401,11 @@
#size-cells = <0>;
};
sid: eeprom@1c14000 {
compatible = "allwinner,sun50i-a64-sid";
reg = <0x1c14000 0x400>;
};
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
@ -356,7 +535,7 @@
};
mmc2_pins: mmc2-pins {
pins = "PC1", "PC5", "PC6", "PC8", "PC9",
pins = "PC5", "PC6", "PC8", "PC9",
"PC10","PC11", "PC12", "PC13",
"PC14", "PC15", "PC16";
function = "mmc2";
@ -364,6 +543,18 @@
bias-pull-up;
};
mmc2_ds_pin: mmc2-ds-pin {
pins = "PC1";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
pwm_pin: pwm_pin {
pins = "PD22";
function = "pwm";
};
rmii_pins: rmii_pins {
pins = "PD10", "PD11", "PD13", "PD14", "PD17",
"PD18", "PD19", "PD20", "PD22", "PD23";
@ -394,7 +585,7 @@
function = "spi1";
};
uart0_pins_a: uart0 {
uart0_pb_pins: uart0-pb-pins {
pins = "PB8", "PB9";
function = "uart0";
};
@ -474,15 +665,6 @@
status = "disabled";
};
pwm: pwm@1c21400 {
compatible = "allwinner,sun50i-a64-pwm",
"allwinner,sun5i-a13-pwm";
reg = <0x01c21400 0x8>;
clocks = <&osc24M>;
#pwm-cells = <3>;
status = "disabled";
};
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
@ -617,8 +799,6 @@
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
mdio: mdio {
compatible = "snps,dwmac-mdio";
@ -638,11 +818,69 @@
#interrupt-cells = <3>;
};
pwm: pwm@1c21400 {
compatible = "allwinner,sun50i-a64-pwm",
"allwinner,sun5i-a13-pwm";
reg = <0x01c21400 0x400>;
clocks = <&osc24M>;
pinctrl-names = "default";
pinctrl-0 = <&pwm_pin>;
#pwm-cells = <3>;
status = "disabled";
};
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun50i-a64-dw-hdmi",
"allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
<&ccu CLK_HDMI>;
clock-names = "iahb", "isfr", "tmds";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
phy-names = "hdmi-phy";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
reg = <0>;
hdmi_in_tcon1: endpoint {
remote-endpoint = <&tcon1_out_hdmi>;
};
};
hdmi_out: port@1 {
reg = <1>;
};
};
};
hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun50i-a64-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
<&ccu 7>;
clock-names = "bus", "mod", "pll-0";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
#phy-cells = <0>;
};
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
clocks = <&osc32k>;
#clock-cells = <1>;
};
r_intc: interrupt-controller@1f00c00 {
@ -664,6 +902,29 @@
#reset-cells = <1>;
};
r_i2c: i2c@1f02400 {
compatible = "allwinner,sun50i-a64-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x01f02400 0x400>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_APB0_I2C>;
resets = <&r_ccu RST_APB0_I2C>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
r_pwm: pwm@1f03800 {
compatible = "allwinner,sun50i-a64-pwm",
"allwinner,sun5i-a13-pwm";
reg = <0x01f03800 0x400>;
clocks = <&osc24M>;
pinctrl-names = "default";
pinctrl-0 = <&r_pwm_pin>;
#pwm-cells = <3>;
status = "disabled";
};
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
@ -675,6 +936,16 @@
interrupt-controller;
#interrupt-cells = <3>;
r_i2c_pl89_pins: r-i2c-pl89-pins {
pins = "PL8", "PL9";
function = "s_i2c";
};
r_pwm_pin: pwm {
pins = "PL10";
function = "s_pwm";
};
r_rsb_pins: rsb {
pins = "PL0", "PL1";
function = "s_rsb";