common: Drop linux/stringify.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

arch/arm/cpu/armv7/bcm235xx/clk-core.h

@@ -4,6 +4,7 @@
  */
 
 #include <linux/stddef.h>
+#include <linux/stringify.h>
 
 #ifdef CONFIG_CLK_DEBUG
 #undef writel

arch/arm/cpu/armv7/bcm281xx/clk-core.h

@@ -4,6 +4,7 @@
  */
 
 #include <linux/stddef.h>
+#include <linux/stringify.h>
 
 #ifdef CONFIG_CLK_DEBUG
 #undef writel

board/Arcturus/ucp1020/cmd_arc.c

@@ -19,6 +19,7 @@
 #include <mmc.h>
 #include <version.h>
 #include <asm/io.h>
+#include <linux/stringify.h>
 
 static ulong fwenv_addr[MAX_FWENV_ADDR];
 const char mystrerr[] = "ERROR: Failed to save factory info";

board/gardena/smart-gateway-mt7688/board.c

@@ -15,6 +15,7 @@
 #include <net.h>
 #include <spi.h>
 #include <spi_flash.h>
+#include <linux/stringify.h>
 #include <u-boot/crc.h>
 #include <uuid.h>
 #include <linux/ctype.h>

board/gdsys/common/osd.c

@@ -10,6 +10,7 @@
 #include <command.h>
 #include <i2c.h>
 #include <malloc.h>
+#include <linux/stringify.h>
 
 #include "ch7301.h"
 #include "dp501.h"

cmd/fastboot.c

@@ -14,6 +14,7 @@
 #include <net.h>
 #include <usb.h>
 #include <watchdog.h>
+#include <linux/stringify.h>
 
 static int do_fastboot_udp(int argc, char *const argv[],
 			   uintptr_t buf_addr, size_t buf_size)

drivers/clk/rockchip/clk_rk3036.c

@@ -17,6 +17,7 @@
 #include <dm/lists.h>
 #include <dt-bindings/clock/rk3036-cru.h>
 #include <linux/log2.h>
+#include <linux/stringify.h>
 
 enum {
 	VCO_MAX_HZ	= 2400U * 1000000,

drivers/clk/rockchip/clk_rk3188.c

@@ -24,6 +24,7 @@
 #include <dm/uclass-internal.h>
 #include <linux/err.h>
 #include <linux/log2.h>
+#include <linux/stringify.h>
 
 enum rk3188_clk_type {
 	RK3188_CRU,

drivers/clk/rockchip/clk_rk322x.c

@@ -17,6 +17,7 @@
 #include <dm/lists.h>
 #include <dt-bindings/clock/rk3228-cru.h>
 #include <linux/log2.h>
+#include <linux/stringify.h>
 
 enum {
 	VCO_MAX_HZ	= 3200U * 1000000,

drivers/clk/rockchip/clk_rk3288.c

@@ -25,6 +25,7 @@
 #include <dm/uclass-internal.h>
 #include <linux/err.h>
 #include <linux/log2.h>
+#include <linux/stringify.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 

drivers/clk/rockchip/clk_rk3368.c

@@ -21,6 +21,7 @@
 #include <asm/io.h>
 #include <dm/lists.h>
 #include <dt-bindings/clock/rk3368-cru.h>
+#include <linux/stringify.h>
 
 #if CONFIG_IS_ENABLED(OF_PLATDATA)
 struct rk3368_clk_plat {

drivers/clk/rockchip/clk_rv1108.c

@@ -18,6 +18,7 @@
 #include <asm/arch-rockchip/hardware.h>
 #include <dm/lists.h>
 #include <dt-bindings/clock/rv1108-cru.h>
+#include <linux/stringify.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 

fs/ubifs/super.c

@@ -38,6 +38,7 @@
 #include <linux/err.h>
 #include "ubifs.h"
 #include <ubi_uboot.h>
+#include <linux/stringify.h>
 #include <mtd/ubi-user.h>
 
 struct dentry;

include/common.h

@@ -21,7 +21,6 @@
 #include <linux/types.h>
 #include <linux/printk.h>
 #include <linux/string.h>
-#include <linux/stringify.h>
 #include <stdarg.h>
 #include <stdio.h>
 #include <linux/kernel.h>

include/config_fsl_chain_trust.h

@@ -6,6 +6,8 @@
 #ifndef __CONFIG_FSL_CHAIN_TRUST_H
 #define __CONFIG_FSL_CHAIN_TRUST_H
 
+#include <linux/stringify.h>
+
 #ifdef CONFIG_CHAIN_OF_TRUST
 
 #ifndef CONFIG_EXTRA_ENV

include/configs/B4860QDS.h

@@ -6,6 +6,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * B4860 QDS board configuration file
  */

include/configs/C29XPCIE.h

@@ -10,6 +10,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc

include/configs/M52277EVB.h

@@ -13,6 +13,8 @@
 #ifndef _M52277EVB_H
 #define _M52277EVB_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  * (easy to change)

include/configs/M5253DEMO.h

@@ -6,6 +6,8 @@
 #ifndef _M5253DEMO_H
 #define _M5253DEMO_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART

include/configs/M5373EVB.h

@@ -13,6 +13,8 @@
 #ifndef _M5373EVB_H
 #define _M5373EVB_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  * (easy to change)

include/configs/M54418TWR.h

@@ -13,6 +13,8 @@
 #ifndef _M54418TWR_H
 #define _M54418TWR_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  * (easy to change)

include/configs/M54451EVB.h

@@ -13,6 +13,8 @@
 #ifndef _M54451EVB_H
 #define _M54451EVB_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  * (easy to change)

include/configs/M54455EVB.h

@@ -13,6 +13,8 @@
 #ifndef _M54455EVB_H
 #define _M54455EVB_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  * (easy to change)

include/configs/MPC8308RDB.h

@@ -8,6 +8,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  */

include/configs/MPC8313ERDB_NAND.h

@@ -9,6 +9,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  */

include/configs/MPC8313ERDB_NOR.h

@@ -18,6 +18,7 @@
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
 #endif
 
+#include <linux/stringify.h>
 #define CONFIG_PCI_INDIRECT_BRIDGE
 
 /*

include/configs/MPC8323ERDB.h

@@ -9,6 +9,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  */

include/configs/MPC8349ITX.h

@@ -52,6 +52,7 @@
 #define CONFIG_SYS_USB_HOST	/* use the EHCI USB controller */
 #endif
 
+#include <linux/stringify.h>
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C
 

include/configs/MPC837XERDB.h

@@ -8,6 +8,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  */

include/configs/MPC8536DS.h

@@ -10,6 +10,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "../board/freescale/common/ics307_clk.h"
 
 #ifdef CONFIG_SDCARD

include/configs/MPC8544DS.h

@@ -22,6 +22,7 @@
 #define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
 
 #ifndef __ASSEMBLY__
+#include <linux/stringify.h>
 extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0) /* sysclk for MPC85xx */

include/configs/MPC8548CDS.h

@@ -27,6 +27,7 @@
 #define CONFIG_FSL_VIA
 
 #ifndef __ASSEMBLY__
+#include <linux/stringify.h>
 extern unsigned long get_clock_freq(void);
 #endif
 #define CONFIG_SYS_CLK_FREQ	get_clock_freq() /* sysclk for MPC85xx */

include/configs/MPC8572DS.h

@@ -10,6 +10,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "../board/freescale/common/ics307_clk.h"
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS

include/configs/MPC8610HPCD.h

@@ -10,6 +10,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /* High Level Configuration Options */
 #define CONFIG_LINUX_RESET_VEC	0x100	/* Reset vector used by Linux */
 

include/configs/MPC8641HPCN.h

@@ -15,6 +15,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /* High Level Configuration Options */
 #define CONFIG_LINUX_RESET_VEC	0x100	/* Reset vector used by Linux */
 #define CONFIG_ADDR_MAP		1	/* Use addr map */

include/configs/P1010RDB.h

@@ -11,6 +11,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #include <asm/config_mpc85xx.h>
 #define CONFIG_NAND_FSL_IFC
 

include/configs/P1022DS.h

@@ -8,6 +8,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "../board/freescale/common/ics307_clk.h"
 
 #ifdef CONFIG_SDCARD

include/configs/P1023RDB.h

@@ -9,6 +9,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #ifndef CONFIG_SYS_MONITOR_BASE
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
 #endif

include/configs/P2041RDB.h

@@ -56,6 +56,7 @@
 
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(unsigned long dummy);
+#include <linux/stringify.h>
 #endif
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0)
 

include/configs/T102xQDS.h

@@ -11,6 +11,8 @@
 #ifndef __T1024QDS_H
 #define __T1024QDS_H
 
+#include <linux/stringify.h>
+
 /* High Level Configuration Options */
 #define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
 #define CONFIG_ENABLE_36BIT_PHYS

include/configs/T102xRDB.h

@@ -11,6 +11,8 @@
 #ifndef __T1024RDB_H
 #define __T1024RDB_H
 
+#include <linux/stringify.h>
+
 /* High Level Configuration Options */
 #define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
 #define CONFIG_ENABLE_36BIT_PHYS

include/configs/T1040QDS.h

@@ -24,6 +24,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * T1040 QDS board configuration file
  */

include/configs/T104xRDB.h

@@ -7,6 +7,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * T104x RDB board configuration file
  */

include/configs/T208xQDS.h

@@ -11,6 +11,8 @@
 #ifndef __T208xQDS_H
 #define __T208xQDS_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
 #if defined(CONFIG_ARCH_T2080)
 #define CONFIG_FSL_SATA_V2

include/configs/T208xRDB.h

@@ -11,6 +11,8 @@
 #ifndef __T2080RDB_H
 #define __T2080RDB_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
 #define CONFIG_FSL_SATA_V2
 

include/configs/T4240QDS.h

@@ -9,6 +9,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_PCIE4
 

include/configs/T4240RDB.h

@@ -10,6 +10,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_PCIE4
 

include/configs/UCP1020.h

@@ -13,6 +13,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*** Arcturus FirmWare Environment */
 
 #define MAX_SERIAL_SIZE 15

include/configs/apalis_imx6.h

@@ -8,6 +8,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "mx6_common.h"
 
 #undef CONFIG_DISPLAY_BOARDINFO

include/configs/apf27.h

@@ -9,6 +9,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_ENV_VERSION	10
 #define CONFIG_BOARD_NAME apf27
 

include/configs/at91sam9263ek.h

@@ -10,6 +10,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * SoC must be defined first, before hardware.h is included.
  * In this case SoC is defined in boards.cfg.
@@ -178,6 +180,7 @@
 		 AT91_WDT_MR_WDD(0xfff))
 
 #endif
+#include <linux/stringify.h>
 #endif
 
 /* NAND flash */

include/configs/bcmstb.h

@@ -15,6 +15,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/stringify.h>
 #include <linux/types.h>
 
 struct bcmstb_boot_parameters {

include/configs/brppt1.h

@@ -13,6 +13,7 @@
 
 #include <configs/bur_cfg_common.h>
 #include <configs/bur_am335x_common.h>
+#include <linux/stringify.h>
 /* ------------------------------------------------------------------------- */
 /* memory */
 #define CONFIG_SYS_MALLOC_LEN		(5 * 1024 * 1024)

include/configs/brsmarc1.h

@@ -14,6 +14,7 @@
 
 #include <configs/bur_cfg_common.h>
 #include <configs/bur_am335x_common.h>
+#include <linux/stringify.h>
 /* ------------------------------------------------------------------------- */
 #define CONFIG_BOARD_TYPES
 

include/configs/brxre1.h

@@ -13,6 +13,7 @@
 
 #include <configs/bur_cfg_common.h>
 #include <configs/bur_am335x_common.h>
+#include <linux/stringify.h>
 /* ------------------------------------------------------------------------- */
 #if !defined(CONFIG_AM335X_LCD)
 #define CONFIG_AM335X_LCD

include/configs/cgtqmx6eval.h

@@ -12,6 +12,8 @@
 #ifndef __CONFIG_CGTQMX6EVAL_H
 #define __CONFIG_CGTQMX6EVAL_H
 
+#include <linux/stringify.h>
+
 #include "mx6_common.h"
 
 #define CONFIG_MACH_TYPE	4122

include/configs/clearfog.h

@@ -6,6 +6,8 @@
 #ifndef _CONFIG_CLEARFOG_H
 #define _CONFIG_CLEARFOG_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options (easy to change)
  */

include/configs/colibri-imx8x.h

@@ -8,6 +8,7 @@
 
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 
 #define CONFIG_REMAKE_ELF
 

include/configs/colibri_imx6.h

@@ -8,6 +8,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "mx6_common.h"
 
 #undef CONFIG_DISPLAY_BOARDINFO

include/configs/controlcenterd.h

@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD
 #endif

include/configs/corenet_ds.h

@@ -10,6 +10,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "../board/freescale/common/ics307_clk.h"
 
 #ifdef CONFIG_RAMBOOT_PBL

include/configs/cyrus.h

@@ -6,6 +6,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
 #error Must call Cyrus CONFIG with a specific CPU enabled.
 #endif

include/configs/dart_6ul.h

@@ -7,6 +7,7 @@
 #define __DART_6UL_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include "mx6_common.h"
 
 /* SPL options */

include/configs/el6x_common.h

@@ -8,6 +8,8 @@
 #ifndef __EL6Q_COMMON_CONFIG_H
 #define __EL6Q_COMMON_CONFIG_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_BOARD_NAME		EL6Q
 
 #include "mx6_common.h"

include/configs/exynos-common.h

@@ -14,6 +14,7 @@
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 

include/configs/helios4.h

@@ -7,6 +7,7 @@
 #define _CONFIG_HELIOS4_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 
 /*
  * High Level Configuration Options (easy to change)

include/configs/hrcon.h

@@ -8,6 +8,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  */

include/configs/ids8313.h

@@ -11,6 +11,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  */

include/configs/imx6-engicam.h

@@ -10,6 +10,7 @@
 #define __IMX6_ENGICAM_CONFIG_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include "mx6_common.h"
 
 /* Size of malloc() pool */

include/configs/imx8mm_evk.h

@@ -7,6 +7,7 @@
 #define __IMX8MM_EVK_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
 #ifdef CONFIG_SECURE_BOOT

include/configs/imx8mn_evk.h

@@ -7,6 +7,7 @@
 #define __IMX8MN_EVK_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
 #ifdef CONFIG_SECURE_BOOT

include/configs/imx8mp_evk.h

@@ -7,6 +7,7 @@
 #define __IMX8MP_EVK_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
 #ifdef CONFIG_SECURE_BOOT

include/configs/imx8mq_evk.h

@@ -7,6 +7,7 @@
 #define __IMX8M_EVK_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
 #define CONFIG_SPL_MAX_SIZE		(124 * 1024)

include/configs/imx8qm_mek.h

@@ -7,6 +7,7 @@
 #define __IMX8QM_MEK_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
 #ifdef CONFIG_SPL_BUILD

include/configs/imx8qm_rom7720.h

@@ -7,6 +7,7 @@
 #define __IMX8QM_ROM7720_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 #define CONFIG_REMAKE_ELF
 
@@ -173,4 +174,5 @@
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define FEC_QUIRK_ENET_MAC
 
+#include <linux/stringify.h>
 #endif /* __IMX8QM_ROM7720_H */

include/configs/imx8qxp_mek.h

@@ -7,6 +7,7 @@
 #define __IMX8QXP_MEK_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
 #ifdef CONFIG_SPL_BUILD

include/configs/km/keymile-common.h

@@ -7,6 +7,8 @@
 #ifndef __CONFIG_KEYMILE_H
 #define __CONFIG_KEYMILE_H
 
+#include <linux/stringify.h>
+
 /*
  * Miscellaneous configurable options
  */

include/configs/km/km-mpc83xx.h

@@ -1,6 +1,7 @@
 /*
  * Internal Definitions
  */
+#include <linux/stringify.h>
 #define BOOTFLASH_START	0xF0000000
 
 /*

include/configs/km/km_arm.h

@@ -104,6 +104,7 @@
 
 #ifndef __ASSEMBLY__
 #include <asm/arch/gpio.h>
+#include <linux/stringify.h>
 extern void __set_direction(unsigned pin, int high);
 void set_sda(int state);
 void set_scl(int state);

include/configs/liteboard.h

@@ -10,6 +10,7 @@
 
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include "mx6_common.h"
 
 /* SPL options */

include/configs/mpc8308_p1m.h

@@ -8,6 +8,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  */

include/configs/mv-common.h

@@ -16,6 +16,8 @@
 #ifndef _MV_COMMON_H
 #define _MV_COMMON_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options (easy to change)
  */

include/configs/mx6_common.h

@@ -6,6 +6,8 @@
 #ifndef __MX6_COMMON_H
 #define __MX6_COMMON_H
 
+#include <linux/stringify.h>
+
 #if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */
 #define COUNTER_FREQUENCY CONFIG_SC_TIMER_CLK

include/configs/mx6cuboxi.h

@@ -7,6 +7,8 @@
 #ifndef __MX6CUBOXI_CONFIG_H
 #define __MX6CUBOXI_CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "mx6_common.h"
 
 #include "imx6_spl.h"

include/configs/mx6sabre_common.h

@@ -8,6 +8,8 @@
 #ifndef __MX6QSABRE_COMMON_CONFIG_H
 #define __MX6QSABRE_COMMON_CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "mx6_common.h"
 
 #define CONFIG_IMX_THERMAL

include/configs/mx6sllevk.h

@@ -135,4 +135,5 @@
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #endif
 
+#include <linux/stringify.h>
 #endif				/* __CONFIG_H */

include/configs/mx6sxsabresd.h

@@ -8,6 +8,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "mx6_common.h"
 
 #ifdef CONFIG_SPL

include/configs/mx6ul_14x14_evk.h

@@ -9,6 +9,7 @@
 
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include "mx6_common.h"
 #include <asm/mach-imx/gpio.h>
 

include/configs/mx6ullevk.h

@@ -10,6 +10,7 @@
 
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include "mx6_common.h"
 #include <asm/mach-imx/gpio.h>
 

include/configs/mx7_common.h

@@ -9,6 +9,7 @@
 #define __MX7_COMMON_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/mach-imx/gpio.h>
 

include/configs/nitrogen6x.h

@@ -113,6 +113,7 @@
 	DISTRO_BOOT_DEV_DHCP(func)
 
 #include <config_distro_bootcmd.h>
+#include <linux/stringify.h>
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"console=ttymxc1\0" \

include/configs/p1_p2_rdb_pc.h

@@ -10,6 +10,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #if defined(CONFIG_TARGET_P1020MBG)
 #define CONFIG_BOARDNAME "P1020MBG-PC"
 #define CONFIG_VSC7385_ENET

include/configs/p1_twr.h

@@ -9,6 +9,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #if defined(CONFIG_TWR_P1025)
 #define CONFIG_BOARDNAME "TWR-P1025"
 #define CONFIG_SYS_LBC_LBCR	0x00080000	/* Conversion of LBC addr */

include/configs/pcl063_ull.h

@@ -10,6 +10,7 @@
 #define __PCL063_ULL_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include "mx6_common.h"
 
 /* SPL options */

include/configs/pcm052.h

@@ -10,6 +10,7 @@
 
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 

include/configs/pico-imx6ul.h

@@ -111,6 +111,7 @@
 	func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
+#include <linux/stringify.h>
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000

include/configs/pico-imx7d.h

@@ -108,6 +108,7 @@
 	func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
+#include <linux/stringify.h>
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000

include/configs/s32v234evb.h

@@ -144,6 +144,7 @@
 	"run distro_bootcmd"
 
 #include <config_distro_bootcmd.h>
+#include <linux/stringify.h>
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_PROMPT		"=> "

include/configs/sbc8548.h

@@ -12,6 +12,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * Top level Makefile configuration choices
  */

include/configs/socfpga_arria5_secu1.h

@@ -7,6 +7,7 @@
 #define __CONFIG_SOCFPGA_SECU1_H__
 
 #include <asm/arch/base_addr_ac5.h>
+#include <linux/stringify.h>
 
 /* Call misc_init_r */
 #define CONFIG_MISC_INIT_R