mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-18 09:13:25 +08:00
mpc83xx: Add the support of MPC837xEMDS board
The MPC837xEMDS board support: * DDR2 400MHz hardcoded and SPD init * Local bus NOR Flash * I2C, UART, MII and RTC * eTSEC RGMII * PCI host Signed-off-by: Dave Liu <daveliu@freescale.com>
This commit is contained in:
Dave Liu
Kim Phillips
parent
555da61702
commit
19580e660c
10
Makefile
10
Makefile
@ -1922,6 +1922,16 @@ MPC8360EMDS_ATM_config: unconfig
|
||||
fi ;
|
||||
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
|
||||
|
||||
MPC837XEMDS_config \
|
||||
MPC837XEMDS_HOST_config: unconfig
|
||||
@mkdir -p $(obj)include
|
||||
@echo "" >$(obj)include/config.h ; \
|
||||
if [ "$(findstring _HOST_,$@)" ] ; then \
|
||||
echo -n "... PCI HOST " ; \
|
||||
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
|
||||
fi ;
|
||||
@$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
|
||||
|
||||
sbc8349_config: unconfig
|
||||
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
|
||||
|
||||
|
||||
50
board/freescale/mpc837xemds/Makefile
Normal file
50
board/freescale/mpc837xemds/Makefile
Normal file
@ -0,0 +1,50 @@
|
||||
#
|
||||
# (C) Copyright 2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS := $(BOARD).o pci.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS)
|
||||
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||
|
||||
clean:
|
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak .depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
28
board/freescale/mpc837xemds/config.mk
Normal file
28
board/freescale/mpc837xemds/config.mk
Normal file
@ -0,0 +1,28 @@
|
||||
#
|
||||
# (C) Copyright 2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
#
|
||||
# MPC837xEMDS
|
||||
#
|
||||
|
||||
TEXT_BASE = 0xFE000000
|
||||
144
board/freescale/mpc837xemds/mpc837xemds.c
Normal file
144
board/freescale/mpc837xemds/mpc837xemds.c
Normal file
@ -0,0 +1,144 @@
|
||||
/*
|
||||
* Copyright (C) 2007 Freescale Semiconductor, Inc.
|
||||
* Dave Liu <daveliu@freescale.com>
|
||||
*
|
||||
* CREDITS: Kim Phillips contribute to LIBFDT code
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <i2c.h>
|
||||
#include <spd.h>
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
#include <spd_sdram.h>
|
||||
#endif
|
||||
#if defined(CONFIG_OF_FLAT_TREE)
|
||||
#include <ft_build.h>
|
||||
#elif defined(CONFIG_OF_LIBFDT)
|
||||
#include <libfdt.h>
|
||||
#endif
|
||||
#if defined(CONFIG_PQ_MDS_PIB)
|
||||
#include "../common/pq-mds-pib.h"
|
||||
#endif
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
u8 *bcsr = (u8 *)CFG_BCSR;
|
||||
|
||||
/* Enable flash write */
|
||||
bcsr[0x9] &= ~0x04;
|
||||
/* Clear all of the interrupt of BCSR */
|
||||
bcsr[0xe] = 0xff;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_early_init_r(void)
|
||||
{
|
||||
#ifdef CONFIG_PQ_MDS_PIB
|
||||
pib_init();
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
|
||||
extern void ddr_enable_ecc(unsigned int dram_size);
|
||||
#endif
|
||||
int fixed_sdram(void);
|
||||
|
||||
long int initdram(int board_type)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *) CFG_IMMR;
|
||||
u32 msize = 0;
|
||||
|
||||
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
|
||||
return -1;
|
||||
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
msize = spd_sdram();
|
||||
#else
|
||||
msize = fixed_sdram();
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
|
||||
/* Initialize DDR ECC byte */
|
||||
ddr_enable_ecc(msize * 1024 * 1024);
|
||||
#endif
|
||||
|
||||
/* return total bus DDR size(bytes) */
|
||||
return (msize * 1024 * 1024);
|
||||
}
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
/*************************************************************************
|
||||
* fixed sdram init -- doesn't use serial presence detect.
|
||||
************************************************************************/
|
||||
int fixed_sdram(void)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *) CFG_IMMR;
|
||||
u32 msize = CFG_DDR_SIZE * 1024 * 1024;
|
||||
u32 msize_log2 = __ilog2(msize);
|
||||
|
||||
im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
|
||||
im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
|
||||
|
||||
#if (CFG_DDR_SIZE != 512)
|
||||
#warning Currenly any ddr size other than 512 is not supported
|
||||
#endif
|
||||
im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
|
||||
udelay(50000);
|
||||
|
||||
im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
|
||||
udelay(1000);
|
||||
|
||||
im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
|
||||
im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
|
||||
udelay(1000);
|
||||
|
||||
im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
|
||||
im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
|
||||
im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
|
||||
im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
|
||||
im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
|
||||
im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
|
||||
im->ddr.sdram_mode = CFG_DDR_MODE;
|
||||
im->ddr.sdram_mode2 = CFG_DDR_MODE2;
|
||||
im->ddr.sdram_interval = CFG_DDR_INTERVAL;
|
||||
__asm__ __volatile__("sync");
|
||||
udelay(1000);
|
||||
|
||||
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
||||
udelay(2000);
|
||||
return CFG_DDR_SIZE;
|
||||
}
|
||||
#endif /*!CFG_SPD_EEPROM */
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
puts("Board: Freescale MPC837xEMDS\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if defined(CONFIG_OF_BOARD_SETUP)
|
||||
void ft_board_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
#if defined(CONFIG_OF_FLAT_TREE)
|
||||
u32 *p;
|
||||
int len;
|
||||
|
||||
p = ft_get_prop(blob, "/memory/reg", &len);
|
||||
if (p != NULL) {
|
||||
*p++ = cpu_to_be32(bd->bi_memstart);
|
||||
*p = cpu_to_be32(bd->bi_memsize);
|
||||
}
|
||||
#endif
|
||||
ft_cpu_setup(blob, bd);
|
||||
#ifdef CONFIG_PCI
|
||||
ft_pci_setup(blob, bd);
|
||||
#endif
|
||||
}
|
||||
#endif /* CONFIG_OF_BOARD_SETUP */
|
||||
65
board/freescale/mpc837xemds/pci.c
Normal file
65
board/freescale/mpc837xemds/pci.c
Normal file
@ -0,0 +1,65 @@
|
||||
/*
|
||||
* Copyright (C) 2007 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <asm/mmu.h>
|
||||
#include <asm/io.h>
|
||||
#include <common.h>
|
||||
#include <mpc83xx.h>
|
||||
#include <pci.h>
|
||||
#include <i2c.h>
|
||||
#include <asm/fsl_i2c.h>
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
static struct pci_region pci_regions[] = {
|
||||
{
|
||||
bus_start: CFG_PCI_MEM_BASE,
|
||||
phys_start: CFG_PCI_MEM_PHYS,
|
||||
size: CFG_PCI_MEM_SIZE,
|
||||
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
|
||||
},
|
||||
{
|
||||
bus_start: CFG_PCI_MMIO_BASE,
|
||||
phys_start: CFG_PCI_MMIO_PHYS,
|
||||
size: CFG_PCI_MMIO_SIZE,
|
||||
flags: PCI_REGION_MEM
|
||||
},
|
||||
{
|
||||
bus_start: CFG_PCI_IO_BASE,
|
||||
phys_start: CFG_PCI_IO_PHYS,
|
||||
size: CFG_PCI_IO_SIZE,
|
||||
flags: PCI_REGION_IO
|
||||
}
|
||||
};
|
||||
|
||||
void pci_init_board(void)
|
||||
{
|
||||
volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
|
||||
volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
|
||||
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
|
||||
struct pci_region *reg[] = { pci_regions };
|
||||
|
||||
/* Enable all 5 PCI_CLK_OUTPUTS */
|
||||
clk->occr |= 0xf8000000;
|
||||
udelay(2000);
|
||||
|
||||
/* Configure PCI Local Access Windows */
|
||||
pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
|
||||
pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
|
||||
|
||||
pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
|
||||
pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
|
||||
|
||||
udelay(2000);
|
||||
|
||||
mpc83xx_pci_init(1, reg, 0);
|
||||
}
|
||||
#endif /* CONFIG_PCI */
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
|
||||
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
@ -155,6 +155,10 @@ void cpu_init_f (volatile immap_t * im)
|
||||
#ifdef CFG_DDRCDR
|
||||
im->sysconf.ddrcdr = CFG_DDRCDR;
|
||||
#endif
|
||||
/* Output buffer impedance register */
|
||||
#ifdef CFG_OBIR
|
||||
im->sysconf.obir = CFG_OBIR;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_QE
|
||||
/* Config QE ioports */
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* (C) Copyright 2006 Freescale Semiconductor, Inc.
|
||||
* (C) Copyright 2006-2007 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* (C) Copyright 2006
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
@ -198,6 +198,7 @@ long int spd_sdram()
|
||||
if(spd.mem_type == SPD_MEMTYPE_DDR2) {
|
||||
immap->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
|
||||
}
|
||||
udelay(50000);
|
||||
#endif
|
||||
|
||||
/*
|
||||
@ -576,7 +577,7 @@ long int spd_sdram()
|
||||
if (effective_data_rate == 266 || effective_data_rate == 333) {
|
||||
cpo = 0x7; /* READ_LAT + 5/4 */
|
||||
} else if (effective_data_rate == 400) {
|
||||
cpo = 0x9; /* READ_LAT + 7/4 */
|
||||
cpo = 0x7; /* READ_LAT + 5/4 */
|
||||
} else {
|
||||
/* Automatic calibration */
|
||||
cpo = 0x1f;
|
||||
@ -705,9 +706,11 @@ long int spd_sdram()
|
||||
* SDRAM Cfg 2
|
||||
*/
|
||||
odt_cfg = 0;
|
||||
#ifndef CONFIG_NEVER_ASSERT_ODT_TO_CPU
|
||||
if (odt_rd_cfg | odt_wr_cfg) {
|
||||
odt_cfg = 0x2; /* ODT to IOs during reads */
|
||||
}
|
||||
#endif
|
||||
if (spd.mem_type == SPD_MEMTYPE_DDR2) {
|
||||
ddr->sdram_cfg2 = (0
|
||||
| (0 << 26) /* True DQS */
|
||||
|
||||
@ -674,6 +674,15 @@ uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
|
||||
return MIIM_CIS8204_EPHYCON_INIT;
|
||||
}
|
||||
|
||||
uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
|
||||
{
|
||||
uint mii_data = read_phy_reg(priv, mii_reg);
|
||||
|
||||
if (priv->flags & TSEC_REDUCED)
|
||||
mii_data = (mii_data & 0xfff0) | 0x000b;
|
||||
return mii_data;
|
||||
}
|
||||
|
||||
/* Initialized required registers to appropriate values, zeroing
|
||||
* those we don't care about (unless zero is bad, in which case,
|
||||
* choose a more appropriate value)
|
||||
@ -1034,6 +1043,7 @@ struct phy_info phy_info_M88E1111S = {
|
||||
(struct phy_cmd[]){ /* config */
|
||||
/* Reset and configure the PHY */
|
||||
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
|
||||
{0x1b, 0x848f, &mii_m88e1111s_setmode},
|
||||
{0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */
|
||||
{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
|
||||
{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
|
||||
|
||||
605
include/configs/MPC837XEMDS.h
Normal file
605
include/configs/MPC837XEMDS.h
Normal file
@ -0,0 +1,605 @@
|
||||
/*
|
||||
* Copyright (C) 2007 Freescale Semiconductor, Inc.
|
||||
* Dave Liu <daveliu@freescale.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#undef DEBUG
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
*/
|
||||
#define CONFIG_E300 1 /* E300 family */
|
||||
#define CONFIG_MPC83XX 1 /* MPC83XX family */
|
||||
#define CONFIG_MPC837X 1 /* MPC837X CPU specific */
|
||||
#define CONFIG_MPC837XEMDS 1 /* MPC837XEMDS board specific */
|
||||
|
||||
/*
|
||||
* System Clock Setup
|
||||
*/
|
||||
#ifdef CONFIG_PCISLAVE
|
||||
#define CONFIG_83XX_PCICLK 66000000 /* in HZ */
|
||||
#else
|
||||
#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_SYS_CLK_FREQ
|
||||
#define CONFIG_SYS_CLK_FREQ 66000000
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Hardware Reset Configuration Word
|
||||
* if CLKIN is 66MHz, then
|
||||
* CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz
|
||||
*/
|
||||
#define CFG_HRCW_LOW (\
|
||||
HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
|
||||
HRCWL_DDR_TO_SCB_CLK_1X1 |\
|
||||
HRCWL_SVCOD_DIV_2 |\
|
||||
HRCWL_CSB_TO_CLKIN_6X1 |\
|
||||
HRCWL_CORE_TO_CSB_1_5X1)
|
||||
|
||||
#ifdef CONFIG_PCISLAVE
|
||||
#define CFG_HRCW_HIGH (\
|
||||
HRCWH_PCI_AGENT |\
|
||||
HRCWH_PCI1_ARBITER_DISABLE |\
|
||||
HRCWH_CORE_ENABLE |\
|
||||
HRCWH_FROM_0XFFF00100 |\
|
||||
HRCWH_BOOTSEQ_DISABLE |\
|
||||
HRCWH_SW_WATCHDOG_DISABLE |\
|
||||
HRCWH_ROM_LOC_LOCAL_16BIT |\
|
||||
HRCWH_RL_EXT_LEGACY |\
|
||||
HRCWH_TSEC1M_IN_RGMII |\
|
||||
HRCWH_TSEC2M_IN_RGMII |\
|
||||
HRCWH_BIG_ENDIAN |\
|
||||
HRCWH_LDP_CLEAR)
|
||||
#else
|
||||
#define CFG_HRCW_HIGH (\
|
||||
HRCWH_PCI_HOST |\
|
||||
HRCWH_PCI1_ARBITER_ENABLE |\
|
||||
HRCWH_CORE_ENABLE |\
|
||||
HRCWH_FROM_0X00000100 |\
|
||||
HRCWH_BOOTSEQ_DISABLE |\
|
||||
HRCWH_SW_WATCHDOG_DISABLE |\
|
||||
HRCWH_ROM_LOC_LOCAL_16BIT |\
|
||||
HRCWH_RL_EXT_LEGACY |\
|
||||
HRCWH_TSEC1M_IN_RGMII |\
|
||||
HRCWH_TSEC2M_IN_RGMII |\
|
||||
HRCWH_BIG_ENDIAN |\
|
||||
HRCWH_LDP_CLEAR)
|
||||
#endif
|
||||
|
||||
/*
|
||||
* eTSEC Clock Config
|
||||
*/
|
||||
#define CFG_SCCR_TSEC1CM 1 /* CSB:eTSEC1 = 1:1 */
|
||||
#define CFG_SCCR_TSEC2CM 1 /* CSB:eTSEC2 = 1:1 */
|
||||
|
||||
/*
|
||||
* System IO Config
|
||||
*/
|
||||
#define CFG_SICRH 0x00000000
|
||||
#define CFG_SICRL 0x00000000
|
||||
|
||||
/*
|
||||
* Output Buffer Impedance
|
||||
*/
|
||||
#define CFG_OBIR 0x31100000
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
|
||||
#define CONFIG_BOARD_EARLY_INIT_R
|
||||
|
||||
/*
|
||||
* IMMR new address
|
||||
*/
|
||||
#define CFG_IMMR 0xE0000000
|
||||
|
||||
/*
|
||||
* DDR Setup
|
||||
*/
|
||||
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
|
||||
#define CFG_SDRAM_BASE CFG_DDR_BASE
|
||||
#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
|
||||
#define CFG_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
|
||||
#define CFG_83XX_DDR_USES_CS0
|
||||
#define CFG_DDRCDR_VALUE 0x80080001 /* ODT 150ohm on SoC */
|
||||
|
||||
#undef CONFIG_DDR_ECC /* support DDR ECC function */
|
||||
#undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */
|
||||
|
||||
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
||||
#define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */
|
||||
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
#define SPD_EEPROM_ADDRESS 0x51 /* I2C address of DDR SODIMM SPD */
|
||||
#else
|
||||
/*
|
||||
* Manually set up DDR parameters
|
||||
* WHITE ELECTRONIC DESGGNS - W3HG64M72EEU403PD4 SO-DIMM
|
||||
* consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5
|
||||
*/
|
||||
#define CFG_DDR_SIZE 512 /* MB */
|
||||
#define CFG_DDR_CS0_BNDS 0x0000001f
|
||||
#define CFG_DDR_CS0_CONFIG ( CSCONFIG_EN \
|
||||
| 0x00010000 /* ODT_WR to CSn */ \
|
||||
| CSCONFIG_ROW_BIT_14 | CSCONFIG_COL_BIT_10 )
|
||||
/* 0x80010202 */
|
||||
#define CFG_DDR_TIMING_3 0x00000000
|
||||
#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
|
||||
| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
|
||||
| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
|
||||
| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
|
||||
| ( 6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
|
||||
| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
|
||||
/* 0x00620802 */
|
||||
#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
|
||||
| ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
|
||||
| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
|
||||
| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
|
||||
| (13 << TIMING_CFG1_REFREC_SHIFT ) \
|
||||
| ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
|
||||
/* 0x3935d322 */
|
||||
#define CFG_DDR_TIMING_2 ( ( 2 << TIMING_CFG2_ADD_LAT_SHIFT ) \
|
||||
| ( 6 << TIMING_CFG2_CPO_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
|
||||
| ( 4 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
|
||||
| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
|
||||
| ( 8 << TIMING_CFG2_FOUR_ACT_SHIFT) )
|
||||
/* 0x231088c8 */
|
||||
#define CFG_DDR_INTERVAL ( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \
|
||||
| ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
|
||||
/* 0x03E00100 */
|
||||
#define CFG_DDR_SDRAM_CFG 0x43000000
|
||||
#define CFG_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */
|
||||
#define CFG_DDR_MODE ( ( 0x0450 << SDRAM_MODE_ESD_SHIFT ) \
|
||||
| ( 0x1432 << SDRAM_MODE_SD_SHIFT ) )
|
||||
/* ODT 150ohm CL=3, AL=2 on SDRAM */
|
||||
#define CFG_DDR_MODE2 0x00000000
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Memory test
|
||||
*/
|
||||
#undef CFG_DRAM_TEST /* memory test, takes time */
|
||||
#define CFG_MEMTEST_START 0x00040000 /* memtest region */
|
||||
#define CFG_MEMTEST_END 0x00140000
|
||||
|
||||
/*
|
||||
* The reserved memory
|
||||
*/
|
||||
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
|
||||
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
||||
#define CFG_RAMBOOT
|
||||
#else
|
||||
#undef CFG_RAMBOOT
|
||||
#endif
|
||||
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
||||
#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
|
||||
|
||||
/*
|
||||
* Initial RAM Base Address Setup
|
||||
*/
|
||||
#define CFG_INIT_RAM_LOCK 1
|
||||
#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
|
||||
#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
|
||||
#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
|
||||
/*
|
||||
* Local Bus Configuration & Clock Setup
|
||||
*/
|
||||
#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
|
||||
#define CFG_LBC_LBCR 0x00000000
|
||||
|
||||
/*
|
||||
* FLASH on the Local Bus
|
||||
*/
|
||||
#define CFG_FLASH_CFI /* use the Common Flash Interface */
|
||||
#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
|
||||
#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
|
||||
#define CFG_FLASH_SIZE 32 /* max FLASH size is 32M */
|
||||
|
||||
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
|
||||
#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
|
||||
|
||||
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
|
||||
(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
|
||||
BR_V) /* valid */
|
||||
#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
|
||||
OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
|
||||
OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
|
||||
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */
|
||||
|
||||
#undef CFG_FLASH_CHECKSUM
|
||||
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
||||
|
||||
/*
|
||||
* BCSR on the Local Bus
|
||||
*/
|
||||
#define CFG_BCSR 0xF8000000
|
||||
#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */
|
||||
#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */
|
||||
|
||||
#define CFG_BR1_PRELIM (CFG_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */
|
||||
#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */
|
||||
|
||||
/*
|
||||
* NAND Flash on the Local Bus
|
||||
*/
|
||||
#define CFG_NAND_BASE 0xE0600000 /* 0xE0600000 */
|
||||
#define CFG_BR3_PRELIM ( CFG_NAND_BASE \
|
||||
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
|
||||
| BR_PS_8 /* Port Size = 8 bit */ \
|
||||
| BR_MS_FCM /* MSEL = FCM */ \
|
||||
| BR_V ) /* valid */
|
||||
#define CFG_OR3_PRELIM ( 0xFFFF8000 /* length 32K */ \
|
||||
| OR_FCM_CSCT \
|
||||
| OR_FCM_CST \
|
||||
| OR_FCM_CHT \
|
||||
| OR_FCM_SCY_1 \
|
||||
| OR_FCM_TRLX \
|
||||
| OR_FCM_EHTR )
|
||||
/* 0xFFFF8396 */
|
||||
|
||||
#define CFG_LBLAWBAR3_PRELIM CFG_NAND_BASE
|
||||
#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */
|
||||
|
||||
/*
|
||||
* Serial Port
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
||||
#define CFG_NS16550
|
||||
#define CFG_NS16550_SERIAL
|
||||
#define CFG_NS16550_REG_SIZE 1
|
||||
#define CFG_NS16550_CLK get_bus_freq(0)
|
||||
|
||||
#define CFG_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
||||
|
||||
#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
|
||||
#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
|
||||
|
||||
/* Use the HUSH parser */
|
||||
#define CFG_HUSH_PARSER
|
||||
#ifdef CFG_HUSH_PARSER
|
||||
#define CFG_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
/* Pass open firmware flat tree */
|
||||
#define CONFIG_OF_LIBFDT 1
|
||||
#define CONFIG_OF_BOARD_SETUP 1
|
||||
#define CONFIG_OF_HAS_BD_T 1
|
||||
#define CONFIG_OF_HAS_UBOOT_ENV 1
|
||||
|
||||
#define OF_CPU "PowerPC,837x@0"
|
||||
#define OF_SOC "soc837x@e0000000"
|
||||
#define OF_TBCLK (bd->bi_busfreq / 4)
|
||||
#define OF_STDOUT_PATH "/soc837x@e0000000/serial@4500"
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CONFIG_FSL_I2C
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CFG_I2C_SLAVE 0x7F
|
||||
#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */
|
||||
#define CFG_I2C_OFFSET 0x3000
|
||||
#define CFG_I2C2_OFFSET 0x3100
|
||||
|
||||
/*
|
||||
* Config on-board RTC
|
||||
*/
|
||||
#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
|
||||
#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
|
||||
|
||||
/*
|
||||
* General PCI
|
||||
* Addresses are mapped 1-1.
|
||||
*/
|
||||
#define CFG_PCI_MEM_BASE 0x80000000
|
||||
#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE
|
||||
#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */
|
||||
#define CFG_PCI_MMIO_BASE 0x90000000
|
||||
#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
|
||||
#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
|
||||
#define CFG_PCI_IO_BASE 0xE0300000
|
||||
#define CFG_PCI_IO_PHYS 0xE0300000
|
||||
#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
|
||||
|
||||
#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE
|
||||
#define CFG_PCI_SLV_MEM_BUS 0x00000000
|
||||
#define CFG_PCI_SLV_MEM_SIZE 0x80000000
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
#define CONFIG_83XX_GENERIC_PCI 1 /* Use generic PCI setup */
|
||||
#define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */
|
||||
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
|
||||
#undef CONFIG_EEPRO100
|
||||
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
#ifndef CONFIG_NET_MULTI
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#endif
|
||||
|
||||
/*
|
||||
* TSEC
|
||||
*/
|
||||
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
|
||||
#define CFG_TSEC1_OFFSET 0x24000
|
||||
#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
|
||||
#define CFG_TSEC2_OFFSET 0x25000
|
||||
#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
|
||||
|
||||
/*
|
||||
* TSEC ethernet configuration
|
||||
*/
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_TSEC1 1
|
||||
#define CONFIG_TSEC1_NAME "eTSEC0"
|
||||
#define CONFIG_TSEC2 1
|
||||
#define CONFIG_TSEC2_NAME "eTSEC1"
|
||||
#define TSEC1_PHY_ADDR 2
|
||||
#define TSEC2_PHY_ADDR 3
|
||||
#define TSEC1_PHYIDX 0
|
||||
#define TSEC2_PHYIDX 0
|
||||
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
||||
#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
||||
|
||||
/* Options are: TSEC[0-1] */
|
||||
#define CONFIG_ETHPRIME "eTSEC1"
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
#ifndef CFG_RAMBOOT
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
|
||||
#define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
|
||||
#define CFG_ENV_SIZE 0x2000
|
||||
#else
|
||||
#define CFG_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
|
||||
#define CFG_ENV_SIZE 0x2000
|
||||
#endif
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_DATE
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_CMD_PCI
|
||||
#endif
|
||||
|
||||
#if defined(CFG_RAMBOOT)
|
||||
#undef CONFIG_CMD_ENV
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#endif
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
/*
|
||||
* Core HID Setup
|
||||
*/
|
||||
#define CFG_HID0_INIT 0x000000000
|
||||
#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
|
||||
#define CFG_HID2 HID2_HBE
|
||||
|
||||
/*
|
||||
* Cache Config
|
||||
*/
|
||||
#define CFG_DCACHE_SIZE 32768
|
||||
#define CFG_CACHELINE_SIZE 32
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* MMU Setup
|
||||
*/
|
||||
|
||||
/* DDR: cache cacheable */
|
||||
#define CFG_SDRAM_LOWER CFG_SDRAM_BASE
|
||||
#define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000)
|
||||
|
||||
#define CFG_IBAT0L (CFG_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
|
||||
#define CFG_IBAT0U (CFG_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CFG_DBAT0L CFG_IBAT0L
|
||||
#define CFG_DBAT0U CFG_IBAT0U
|
||||
|
||||
#define CFG_IBAT1L (CFG_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
|
||||
#define CFG_IBAT1U (CFG_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CFG_DBAT1L CFG_IBAT1L
|
||||
#define CFG_DBAT1U CFG_IBAT1U
|
||||
|
||||
/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
|
||||
#define CFG_IBAT2L (CFG_IMMR | BATL_PP_10 | \
|
||||
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CFG_IBAT2U (CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
|
||||
#define CFG_DBAT2L CFG_IBAT2L
|
||||
#define CFG_DBAT2U CFG_IBAT2U
|
||||
|
||||
/* BCSR: cache-inhibit and guarded */
|
||||
#define CFG_IBAT3L (CFG_BCSR | BATL_PP_10 | \
|
||||
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CFG_IBAT3U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
|
||||
#define CFG_DBAT3L CFG_IBAT3L
|
||||
#define CFG_DBAT3U CFG_IBAT3U
|
||||
|
||||
/* FLASH: icache cacheable, but dcache-inhibit and guarded */
|
||||
#define CFG_IBAT4L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
||||
#define CFG_IBAT4U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
|
||||
#define CFG_DBAT4L (CFG_FLASH_BASE | BATL_PP_10 | \
|
||||
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CFG_DBAT4U CFG_IBAT4U
|
||||
|
||||
/* Stack in dcache: cacheable, no memory coherence */
|
||||
#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10)
|
||||
#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
|
||||
#define CFG_DBAT5L CFG_IBAT5L
|
||||
#define CFG_DBAT5U CFG_IBAT5U
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
/* PCI MEM space: cacheable */
|
||||
#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
|
||||
#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CFG_DBAT6L CFG_IBAT6L
|
||||
#define CFG_DBAT6U CFG_IBAT6U
|
||||
/* PCI MMIO space: cache-inhibit and guarded */
|
||||
#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
|
||||
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CFG_DBAT7L CFG_IBAT7L
|
||||
#define CFG_DBAT7U CFG_IBAT7U
|
||||
#else
|
||||
#define CFG_IBAT6L (0)
|
||||
#define CFG_IBAT6U (0)
|
||||
#define CFG_IBAT7L (0)
|
||||
#define CFG_IBAT7U (0)
|
||||
#define CFG_DBAT6L CFG_IBAT6L
|
||||
#define CFG_DBAT6U CFG_IBAT6U
|
||||
#define CFG_DBAT7L CFG_IBAT7L
|
||||
#define CFG_DBAT7U CFG_IBAT7U
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment Configuration
|
||||
*/
|
||||
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#if defined(CONFIG_TSEC_ENET)
|
||||
#define CONFIG_HAS_ETH0
|
||||
#define CONFIG_ETHADDR 00:E0:0C:00:83:79
|
||||
#define CONFIG_HAS_ETH1
|
||||
#define CONFIG_ETH1ADDR 00:E0:0C:00:83:78
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
|
||||
|
||||
#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
|
||||
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=1000000\0" \
|
||||
"ramdiskfile=ramfs.83xx\0" \
|
||||
"fdtaddr=400000\0" \
|
||||
"fdtfile=mpc837xemds.dtb\0" \
|
||||
""
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue
Block a user