From 15a2acdf850e86cd0ae8dfc80d49c89727bac09b Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 16 Nov 2016 08:41:01 +0100 Subject: [PATCH] common: miiphyutil: Work and report phy address in hex in mdio cmd It is confusing that mdio commands work and report phy id as decimal value when mii is working with hex values. For example: ZynqMP> mdio list gem: 21 - TI DP83867 <--> ethernet@ff0e0000 ZynqMP> mdio read ethernet@ff0e0000 0 Reading from bus gem PHY at address 21: 0 - 0x1140 ZynqMP> mii dump 21 0 Incorrect PHY address. Range should be 0-31 ... ZynqMP> mii dump 15 0. (1140) -- PHY control register -- (8000:0000) 0.15 = 0 reset U-Boot normally takes hex values that's why this patch is changing mdio command to handle hex instead of changing mii command to handle decimal values. Signed-off-by: Michal Simek Reviewed-by: Simon Glass Acked-by: Joe Hershberger --- cmd/mdio.c | 6 +++--- common/miiphyutil.c | 2 +- drivers/net/zynq_gem.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/cmd/mdio.c b/cmd/mdio.c index fb13d050752..21dc103736e 100644 --- a/cmd/mdio.c +++ b/cmd/mdio.c @@ -27,12 +27,12 @@ static uint last_reg_hi; static int extract_range(char *input, int *plo, int *phi) { char *end; - *plo = simple_strtol(input, &end, 0); + *plo = simple_strtol(input, &end, 16); if (end == input) return -1; if ((*end == '-') && *(++end)) - *phi = simple_strtol(end, NULL, 0); + *phi = simple_strtol(end, NULL, 16); else if (*end == '\0') *phi = *plo; else @@ -79,7 +79,7 @@ static int mdio_read_ranges(struct phy_device *phydev, struct mii_dev *bus, printf("Reading from bus %s\n", bus->name); for (addr = addrlo; addr <= addrhi; addr++) { - printf("PHY at address %d:\n", addr); + printf("PHY at address %x:\n", addr); for (devad = devadlo; devad <= devadhi; devad++) { for (reg = reglo; reg <= reghi; reg++) { diff --git a/common/miiphyutil.c b/common/miiphyutil.c index d8ebb384dbf..aca18db52a0 100644 --- a/common/miiphyutil.c +++ b/common/miiphyutil.c @@ -135,7 +135,7 @@ void mdio_list_devices(void) struct phy_device *phydev = bus->phymap[i]; if (phydev) { - printf("%d - %s", i, phydev->drv->name); + printf("%x - %s", i, phydev->drv->name); if (phydev->dev) printf(" <--> %s\n", phydev->dev->name); diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 3319e10467d..526eac658ac 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -706,7 +706,7 @@ static int zynq_gem_ofdata_to_platdata(struct udevice *dev) priv->emio = fdtdec_get_bool(gd->fdt_blob, dev->of_offset, "xlnx,emio"); - printf("ZYNQ GEM: %lx, phyaddr %d, interface %s\n", (ulong)priv->iobase, + printf("ZYNQ GEM: %lx, phyaddr %x, interface %s\n", (ulong)priv->iobase, priv->phyaddr, phy_string_for_interface(priv->interface)); return 0;