mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-25 21:24:21 +08:00
Code Issues Packages Projects Releases Wiki Activity

x86: edison: Don't take SD card detect pin into consideration

Browse Source 
There are two PCB designs in the wild which use the opposite
signaling for SD card detection. This makes U-Boot working
in one case and failing in the other. Quirk this out by
disconnecting SD card detection pin from the PCB by switching
it to mode 3. In the disconnected state the read value is always
the same and inverted to what we are expecting in the code.

BugLink: https://github.com/edison-fw/meta-intel-edison/issues/136
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This commit is contained in:
Andy Shevchenko 2021-10-27 14:28:10 +03:00 committed by Bin Meng
parent 90cc2c5c64
commit 144cb06083
1 changed files with 17 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
arch/x86/dts/edison.dts
View File

@ -94,6 +94,12 @@
sdcard: mmc@ff3fa000 {
compatible = "intel,sdhci-tangier";
reg = <0xff3fa000 0x1000>;
/*
* In the disconnected state of the SD Card Detection pin
* the read value is always the same and inverted to what
* we are expecting in the code.
*/
cd-inverted;
};
pmu: power@ff00b000 {
@ -131,6 +137,17 @@
compatible = "intel,pinctrl-tangier";
reg = <0xff0c0000 0x8000>;
/*
* Disconnect SD card detection pin, so it won't affect
* the reality on two different PCB designs where it's
* using the opposite signaling: Edison/Arduino uses
* Active Low, while SparkFun went with Active High.
*/
sd_cd@0 {
pad-offset = <37>;
mode-func = <3>;
};
/*
* Initial configuration came from the firmware.
* Which quite likely has been used in the phones, where I2C #8,