diff --git a/README b/README
index c0f55b2586c..12096331760 100644
--- a/README
+++ b/README
@@ -984,21 +984,13 @@ The following options need to be configured:
 		CFG_SYS_I2C_NOPROBES
 
 		This option specifies a list of I2C devices that will be skipped
-		when the 'i2c probe' command is issued.	 If CONFIG_I2C_MULTI_BUS
-		is set, specify a list of bus-device pairs.  Otherwise, specify
-		a 1D array of device addresses
+		when the 'i2c probe' command is issued.
 
 		e.g.
-			#undef	CONFIG_I2C_MULTI_BUS
 			#define CFG_SYS_I2C_NOPROBES {0x50,0x68}
 
 		will skip addresses 0x50 and 0x68 on a board with one I2C bus
 
-			#define CONFIG_I2C_MULTI_BUS
-			#define CFG_SYS_I2C_NOPROBES	{{0,0x50},{0,0x68},{1,0x54}}
-
-		will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1
-
 		CFG_SYS_RTC_BUS_NUM
 
 		If defined, then this indicates the I2C bus number for the RTC.
diff --git a/cmd/i2c.c b/cmd/i2c.c
index da8b4c25555..f204061cf09 100644
--- a/cmd/i2c.c
+++ b/cmd/i2c.c
@@ -98,7 +98,7 @@ static uint	i2c_mm_last_alen;
  * pairs.  The following macros take care of this */
 
 #if defined(CFG_SYS_I2C_NOPROBES)
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
 static struct
 {
 	uchar	bus;
@@ -1764,8 +1764,7 @@ static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc,
  * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
  * on error.
  */
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS) || \
-		CONFIG_IS_ENABLED(DM_I2C)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
 static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
 			  char *const argv[])
 {
@@ -1915,10 +1914,9 @@ static struct cmd_tbl cmd_i2c_sub[] = {
 	U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""),
 #endif
 	U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || \
-	defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
 	U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
-#endif  /* CONFIG_I2C_MULTI_BUS */
+#endif
 #if defined(CONFIG_I2C_EDID)
 	U_BOOT_CMD_MKENT(edid, 1, 1, do_edid, "", ""),
 #endif  /* CONFIG_I2C_EDID */
@@ -1992,10 +1990,9 @@ static char i2c_help_text[] =
 	"i2c " /* That's the prefix for the crc32 command below. */
 #endif
 	"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || \
-	defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
 	"i2c dev [dev] - show or set current I2C bus\n"
-#endif  /* CONFIG_I2C_MULTI_BUS */
+#endif
 #if defined(CONFIG_I2C_EDID)
 	"i2c edid chip - print EDID configuration information\n"
 #endif  /* CONFIG_I2C_EDID */
diff --git a/drivers/i2c/mv_i2c.c b/drivers/i2c/mv_i2c.c
index 8ee17f0a450..5bc9cd7b295 100644
--- a/drivers/i2c/mv_i2c.c
+++ b/drivers/i2c/mv_i2c.c
@@ -374,45 +374,12 @@ static int __i2c_write(struct mv_i2c *base, uchar chip, u8 *addr, int alen,
 
 static struct mv_i2c *base_glob;
 
-#ifdef CONFIG_I2C_MULTI_BUS
-static unsigned long i2c_regs[CONFIG_MV_I2C_NUM] = CONFIG_MV_I2C_REG;
-static unsigned int bus_initialized[CONFIG_MV_I2C_NUM];
-static unsigned int current_bus;
-
-int i2c_set_bus_num(unsigned int bus)
-{
-	if ((bus < 0) || (bus >= CONFIG_MV_I2C_NUM)) {
-		printf("Bad bus: %d\n", bus);
-		return -1;
-	}
-
-	base_glob = (struct mv_i2c *)i2c_regs[bus];
-	current_bus = bus;
-
-	if (!bus_initialized[current_bus]) {
-		bus_initialized[current_bus] = 1;
-	}
-
-	return 0;
-}
-
-unsigned int i2c_get_bus_num(void)
-{
-	return current_bus;
-}
-#endif
-
 /* API Functions */
 void i2c_init(int speed, int slaveaddr)
 {
 	u32 val;
 
-#ifdef CONFIG_I2C_MULTI_BUS
-	current_bus = 0;
-	base_glob = (struct mv_i2c *)i2c_regs[current_bus];
-#else
 	base_glob = (struct mv_i2c *)CONFIG_MV_I2C_REG;
-#endif
 
 	if (speed > I2C_SPEED_STANDARD_RATE)
 		val = ICR_FM;
diff --git a/include/configs/display5.h b/include/configs/display5.h
index 7636d2869a9..5cbeb9224c3 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -36,9 +36,6 @@
 
 #define CONFIG_MXC_UART_BASE		UART5_BASE
 
-/* I2C Configs */
-#define CONFIG_I2C_MULTI_BUS
-
 /* MMC Configs */
 #define CFG_SYS_FSL_ESDHC_ADDR	0
 #define CFG_SYS_FSL_USDHC_NUM	2
diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h
index 8d5b24d827d..ffd394691a0 100644
--- a/include/configs/km/pg-wcom-ls102xa.h
+++ b/include/configs/km/pg-wcom-ls102xa.h
@@ -149,7 +149,6 @@
  * I2C
  */
 
-#define CONFIG_I2C_MULTI_BUS
 #define CFG_SYS_I2C_MAX_HOPS		1
 #define CFG_SYS_NUM_I2C_BUSES	3
 #define I2C_MUX_PCA_ADDR		0x70
diff --git a/include/configs/novena.h b/include/configs/novena.h
index 6e4bdce1c08..79e49c74f85 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -33,9 +33,6 @@
 #define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CFG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
-/* I2C */
-#define CONFIG_I2C_MULTI_BUS
-
 /* I2C EEPROM */
 
 /* MMC Configs */