ARM: dts: rmobile: Extract AVB node extras on V3M Eagle

The AVB node is not complete in Linux 4.17 DTs on V3M Eagle, pull the
AVB node extras into U-Boot specific DT until they hit mainline Linux,
to make syncing of DTs easier.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
V2: Rebase on u-boot/master
This commit is contained in:
Marek Vasut 2018-12-03 20:45:22 +01:00 committed by Marek Vasut
parent 830b94f768
commit 1172ade967
2 changed files with 20 additions and 11 deletions

View File

@ -7,6 +7,7 @@
#include "r8a77970-eagle.dts"
#include "r8a77970-u-boot.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
@ -14,6 +15,25 @@
};
};
&avb {
pinctrl-0 = <&avb0_pins>;
pinctrl-names = "default";
};
&phy0 {
reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
&pfc {
avb0_pins: avb {
mux {
groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
function = "avb0";
};
};
};
&rpc {
num-cs = <1>;
status = "okay";

View File

@ -8,7 +8,6 @@
/dts-v1/;
#include "r8a77970.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas Eagle board based on r8a77970";
@ -32,8 +31,6 @@
};
&avb {
pinctrl-0 = <&avb0_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
@ -44,7 +41,6 @@
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
@ -72,13 +68,6 @@
};
&pfc {
avb0_pins: avb {
mux {
groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
function = "avb0";
};
};
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";