mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-04 01:53:27 +08:00
Code Issues Packages Projects Releases Wiki Activity

mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems

Browse Source 
It could happen (1 out of 100 times) that NAND did not start up correctly after
warm rebooting, so we end up with various failures or DMA timed out due to a
stalled BCH. When resetting BCH together with GPMI, the issue could not be
observed anymore (after 10000+ reboots). We probably need the consistent state
already before sending commands to NAND. This behaviour was observed in barebox
and kernel, so I assume it affects U-Boot as well. I chose to keep the extra
reset for BCH when changing the flash layout to be on the safe side.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Marek Vasut <marex@denx.de>
This commit is contained in:
Wolfram Sang 2012-12-05 10:48:47 +00:00 committed by Scott Wood
parent ea40a05422
commit 0b38fffbe4
1 changed files with 3 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
drivers/mtd/nand/mxs_nand.c
View File

@ -1058,6 +1058,8 @@ int mxs_nand_init(struct mxs_nand_info *info)
{
struct mxs_gpmi_regs *gpmi_regs =
(struct mxs_gpmi_regs *)MXS_GPMI_BASE;
struct mxs_bch_regs *bch_regs =
(struct mxs_bch_regs *)MXS_BCH_BASE;
int i = 0, j;
info->desc = malloc(sizeof(struct mxs_dma_desc *) *
@ -1081,6 +1083,7 @@ int mxs_nand_init(struct mxs_nand_info *info)
/* Reset the GPMI block. */
mxs_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg);
mxs_reset_block(&bch_regs->hw_bch_ctrl_reg);
/*
* Choose NAND mode, set IRQ polarity, disable write protection and