Add pxe command

Add pxe command, which is intended to mimic PXELINUX functionality.
'pxe get' uses tftp to retrieve a file based on UUID, MAC address or IP
address. 'pxe boot' interprets the contents of PXELINUX config like file
to boot using a specific initrd, kernel and kernel command line.

This patch also adds a README.pxe file - see it for more details on the
pxe command.

Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>

common/Makefile

@@ -136,6 +136,7 @@ COBJS-$(CONFIG_CMD_PCI) += cmd_pci.o
 endif
 COBJS-y += cmd_pcmcia.o
 COBJS-$(CONFIG_CMD_PORTIO) += cmd_portio.o
+COBJS-$(CONFIG_CMD_PXE) += cmd_pxe.o
 COBJS-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o
 COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o
 COBJS-$(CONFIG_CMD_SATA) += cmd_sata.o

common/main.c

@@ -269,7 +269,9 @@ int abortboot(int bootdelay)
 /*
  * Return 0 on success, or != 0 on error.
  */
+#ifndef CONFIG_CMD_PXE
 static inline
+#endif
 int run_command2(const char *cmd, int flag)
 {
 #ifndef CONFIG_SYS_HUSH_PARSER

doc/README.pxe

@@ -0,0 +1,240 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+The 'pxe' commands provide a near subset of the functionality provided by
+the PXELINUX boot loader. This allows U-boot based systems to be controlled
+remotely using the same PXE based techniques that many non U-boot based servers
+use.
+
+Commands
+========
+
+pxe get
+-------
+     syntax: pxe get
+
+     follows PXELINUX's rules for retrieving configuration files from a tftp
+     server, and supports a subset of PXELINUX's config file syntax.
+
+     Environment
+     -----------
+     'pxe get' requires two environment variables to be set:
+
+     pxefile_addr_r - should be set to a location in RAM large enough to hold
+     pxe files while they're being processed. Up to 16 config files may be
+     held in memory at once. The exact number and size of the files varies with
+     how the system is being used. A typical config file is a few hundred bytes
+     long.
+
+     bootfile,serverip - these two are typically set in the DHCP response
+     handler, and correspond to fields in the DHCP response.
+
+     'pxe get' optionally supports these two environment variables being set:
+
+     ethaddr - this is the standard MAC address for the ethernet adapter in use.
+     'pxe get' uses it to look for a configuration file specific to a system's
+     MAC address.
+
+     pxeuuid - this is a UUID in standard form using lower case hexadecimal
+     digits, for example, 550e8400-e29b-41d4-a716-446655440000. 'pxe get' uses
+     it to look for a configuration file based on the system's UUID.
+
+     File Paths
+     ----------
+     'pxe get' repeatedly tries to download config files until it either
+     successfully downloads one or runs out of paths to try. The order and
+     contents of paths it tries mirrors exactly that of PXELINUX - you can
+     read in more detail about it at:
+
+     http://syslinux.zytor.com/wiki/index.php/Doc/pxelinux
+
+pxe boot
+--------
+     syntax: pxe boot [pxefile_addr_r]
+
+     Interprets a pxe file stored in memory.
+
+     pxefile_addr_r is an optional argument giving the location of the pxe file.
+     The file must be terminated with a NUL byte.
+
+     Environment
+     -----------
+     There are some environment variables that may need to be set, depending
+     on conditions.
+
+     pxefile_addr_r - if the optional argument pxefile_addr_r is not supplied,
+     an environment variable named pxefile_addr_r must be supplied. This is
+     typically the same value as is used for the 'pxe get' command.
+
+     bootfile - typically set in the DHCP response handler based on the
+     same field in the DHCP respone, this path is used to generate the base
+     directory that all other paths to files retrieved by 'pxe boot' will use.
+     If no bootfile is specified, paths used in pxe files will be used as is.
+
+     serverip - typically set in the DHCP response handler, this is the IP
+     address of the tftp server from which other files will be retrieved.
+
+     kernel_addr_r, initrd_addr_r - locations in RAM at which 'pxe boot' will
+     store the kernel and initrd it retrieves from tftp. These locations will
+     be passed to the bootm command to boot the kernel. These environment
+     variables are required to be set.
+
+     fdt_addr - the location of a fdt blob. If this is set, it will be passed
+     to bootm when booting a kernel.
+
+pxe file format
+===============
+The pxe file format is nearly a subset of the PXELINUX file format; see
+http://syslinux.zytor.com/wiki/index.php/PXELINUX. It's composed of one line
+commands - global commands, and commands specific to labels. Lines begining
+with # are treated as comments. White space between and at the beginning of
+lines is ignored.
+
+The size of pxe files and the number of labels is only limited by the amount
+of RAM available to U-boot. Memory for labels is dynamically allocated as
+they're parsed, and memory for pxe files is statically allocated, and its
+location is given by the pxefile_addr_r environment variable. The pxe code is
+not aware of the size of the pxefile memory and will outgrow it if pxe files
+are too large.
+
+Supported global commands
+-------------------------
+Unrecognized commands are ignored.
+
+default <label>     - the label named here is treated as the default and is
+                      the first label 'pxe boot' attempts to boot.
+
+menu title <string> - sets a title for the menu of labels being displayed.
+
+menu include <path> - use tftp to retrieve the pxe file at <path>, which
+                      is then immediately parsed as if the start of its
+                      contents were the next line in the current file. nesting
+                      of include up to 16 files deep is supported.
+
+prompt <flag>       - if 1, always prompt the user to enter a label to boot
+                      from. if 0, only prompt the user if timeout expires.
+
+timeout <num>	    - wait for user input for <num>/10 seconds before
+                      auto-booting a node.
+
+label <name>        - begin a label definition. labels continue until
+                      a command not recognized as a label command is seen,
+                      or EOF is reached.
+
+Supported label commands
+------------------------
+labels end when a command not recognized as a label command is reached, or EOF.
+
+menu default        - set this label as the default label to boot; this is
+                      the same behavior as the global default command but
+                      specified in a different way
+
+kernel <path>       - if this label is chosen, use tftp to retrieve the kernel
+                      at <path>. it will be stored at the address indicated in
+                      the kernel_addr_r environment variable, and that address
+                      will be passed to bootm to boot this kernel.
+
+append <string>     - use <string> as the kernel command line when booting this
+                      label.
+
+initrd <path>       - if this label is chosen, use tftp to retrieve the initrd
+                      at <path>. it will be stored at the address indicated in
+                      the initrd_addr_r environment variable, and that address
+                      will be passed to bootm.
+
+localboot <flag>    - Run the command defined by "localcmd" in the environment.
+                      <flag> is ignored and is only here to match the syntax of
+                      PXELINUX config files.
+
+Example
+-------
+Here's a couple of example files to show how this works.
+
+------------/tftpboot/pxelinux.cfg/menus/linux.list----------
+menu title Linux selections
+
+# This is the default label
+label install
+	menu label Default Install Image
+	kernel kernels/install.bin
+	append console=ttyAMA0,38400 debug earlyprintk
+	initrd initrds/uzInitrdDebInstall
+
+# Just another label
+label linux-2.6.38
+	kernel kernels/linux-2.6.38.bin
+	append root=/dev/sdb1
+
+# The locally installed kernel
+label local
+	menu label Locally installed kernel
+	append root=/dev/sdb1
+	localboot 1
+-------------------------------------------------------------
+
+------------/tftpboot/pxelinux.cfg/default-------------------
+menu include pxelinux.cfg/menus/base.menu
+timeout 500
+
+default linux-2.6.38
+-------------------------------------------------------------
+
+When a pxe client retrieves and boots the default pxe file,
+'pxe boot' will wait for user input for 5 seconds before booting
+the linux-2.6.38 label, which will cause /tftpboot/kernels/linux-2.6.38.bin
+to be downloaded, and boot with the command line "root=/dev/sdb1"
+
+Differences with PXELINUX
+=========================
+The biggest difference between U-boot's pxe and PXELINUX is that since
+U-boot's pxe support is written entirely in C, it can run on any platform
+with network support in U-boot. Here are some other differences between
+PXELINUX and U-boot's pxe support.
+
+- U-boot's pxe does not support the PXELINUX DHCP option codes specified
+  in RFC 5071, but could be extended to do so.
+
+- when U-boot's pxe fails to boot, it will return control to U-boot,
+  allowing another command to run, other U-boot command, instead of resetting
+  the machine like PXELINUX.
+
+- U-boot's pxe doesn't rely on or provide an UNDI/PXE stack in memory, it
+  only uses U-boot.
+
+- U-boot's pxe doesn't provide the full menu implementation that PXELINUX
+  does, only a simple text based menu using the commands described in
+  this README.  With PXELINUX, it's possible to have a graphical boot
+  menu, submenus, passwords, etc. U-boot's pxe could be extended to support
+  a more robust menuing system like that of PXELINUX's.
+
+- U-boot's pxe expects U-boot uimg's as kernels.  Anything that would work
+  with the 'bootm' command in U-boot could work with the 'pxe boot' command.
+
+- U-boot's pxe doesn't recognize initrd options in the append command - you
+  must specify initrd files using the initrd command.
+
+- U-boot's pxe only recognizes a single file on the initrd command line.  It
+  could be extended to support multiple.
+
+- in U-boot's pxe, the localboot command doesn't necessarily cause a local
+  disk boot - it will do whatever is defined in the 'localcmd' env
+  variable. And since it doesn't support a full UNDI/PXE stack, the
+  type field is ignored.
+
+- the interactive prompt in U-boot's pxe only allows you to choose a label
+  from the menu.  If you want to boot something not listed, you can ctrl+c
+  out of 'pxe boot' and use existing U-boot commands to accomplish it.

include/common.h

@@ -255,6 +255,9 @@ int	print_buffer (ulong addr, void* data, uint width, uint count, uint linelen);
 /* common/main.c */
 void	main_loop	(void);
 int	run_command	(const char *cmd, int flag);
+#ifdef CONFIG_CMD_PXE
+int run_command2(const char *cmd, int flag);
+#endif
 int	readline	(const char *const prompt);
 int	readline_into_buffer	(const char *const prompt, char * buffer);
 int	parse_line (char *, char *[]);
@@ -285,6 +288,9 @@ extern ulong load_addr;		/* Default Load Address */
 /* common/cmd_doc.c */
 void	doc_probe(unsigned long physadr);
 
+/* common/cmd_net.c */
+int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+
 /* common/cmd_nvedit.c */
 int	env_init     (void);
 void	env_relocate (void);