board_f: Fix types for board_get_usable_ram_top()

Commit 37dc958947 ("global_data.h: Change ram_top type to phys_addr_t")
changed type of ram_top member from ulong to phys_addr_t but did not
changed types in board_get_usable_ram_top() function which returns value
for ram_top.

So change ulong to phys_addr_t type also in board_get_usable_ram_top()
signature and implementations.

Fixes: 37dc958947 ("global_data.h: Change ram_top type to phys_addr_t")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arch/arm/mach-imx/imx8m/soc.c

@@ -327,7 +327,7 @@ phys_size_t get_effective_memsize(void)
 	}
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	ulong top_addr;
 

arch/arm/mach-mvebu/arm64-common.c

@@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 #define USABLE_RAM_SIZE		0x80000000ULL
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	unsigned long top = CONFIG_SYS_SDRAM_BASE + min(gd->ram_size, USABLE_RAM_SIZE);
 

arch/arm/mach-rockchip/sdram.c

@@ -205,7 +205,7 @@ int dram_init(void)
 	return 0;
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	unsigned long top = CONFIG_SYS_SDRAM_BASE + SDRAM_MAX_SIZE;
 

arch/arm/mach-stm32mp/dram_init.c

@@ -40,7 +40,7 @@ int dram_init(void)
 	return 0;
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	phys_size_t size;
 	phys_addr_t reg;

arch/arm/mach-sunxi/board.c

@@ -65,7 +65,7 @@ static struct mm_region sunxi_mem_map[] = {
 };
 struct mm_region *mem_map = sunxi_mem_map;
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	/* Some devices (like the EMAC) have a 32-bit DMA limit. */
 	if (gd->ram_top > (1ULL << 32))

arch/arm/mach-tegra/board2.c

@@ -401,7 +401,7 @@ int dram_init_banksize(void)
  * This function is called before dram_init_banksize(), so we can't simply
  * return gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size.
  */
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	ulong ram_top;
 

arch/mips/mach-jz47xx/jz4780/jz4780.c

@@ -76,7 +76,7 @@ void board_init_f(ulong dummy)
 }
 #endif /* CONFIG_SPL_BUILD */
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	return CONFIG_SYS_SDRAM_BASE + (256 * 1024 * 1024);
 }

arch/mips/mach-octeon/dram.c

@@ -77,7 +77,7 @@ phys_size_t get_effective_memsize(void)
 	return UBOOT_RAM_SIZE_MAX;
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	if (IS_ENABLED(CONFIG_RAM_OCTEON)) {
 		/* Map a maximum of 256MiB - return not size but address */

arch/riscv/cpu/fu540/dram.c

@@ -21,7 +21,7 @@ int dram_init_banksize(void)
 	return fdtdec_setup_memory_banksize();
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	/*
 	 * Ensure that we run from first 4GB so that all

arch/riscv/cpu/fu740/dram.c

@@ -20,7 +20,7 @@ int dram_init_banksize(void)
 	return fdtdec_setup_memory_banksize();
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 #ifdef CONFIG_64BIT
 	/*

arch/riscv/cpu/generic/dram.c

@@ -21,7 +21,7 @@ int dram_init_banksize(void)
 	return fdtdec_setup_memory_banksize();
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	/*
 	 * Ensure that we run from first 4GB so that all

arch/x86/cpu/broadwell/sdram.c

@@ -25,7 +25,7 @@
 #include <asm/arch/pei_data.h>
 #include <asm/arch/pm.h>
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	return mrc_common_board_get_usable_ram_top(total_size);
 }

arch/x86/cpu/coreboot/sdram.c

@@ -27,7 +27,7 @@ unsigned int install_e820_map(unsigned int max_entries,
  * address, and how far U-Boot is moved by relocation are set in the global
  * data structure.
  */
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	uintptr_t dest_addr = 0;
 	int i;

arch/x86/cpu/efi/payload.c

@@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
  * the relocation address, and how far U-Boot is moved by relocation are
  * set in the global data structure.
  */
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	struct efi_mem_desc *desc, *end;
 	struct efi_entry_memmap *map;

arch/x86/cpu/efi/sdram.c

@@ -11,7 +11,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	return (ulong)efi_get_ram_base() + gd->ram_size;
 }

arch/x86/cpu/intel_common/mrc.c

@@ -25,7 +25,7 @@ static const char *const ecc_decoder[] = {
 	"active"
 };
 
-ulong mrc_common_board_get_usable_ram_top(ulong total_size)
+phys_size_t mrc_common_board_get_usable_ram_top(phys_size_t total_size)
 {
 	struct memory_info *info = &gd->arch.meminfo;
 	uintptr_t dest_addr = 0;
@@ -50,7 +50,7 @@ ulong mrc_common_board_get_usable_ram_top(ulong total_size)
 
 	dest_addr = largest->start + largest->size;
 
-	return (ulong)dest_addr;
+	return (phys_size_t)dest_addr;
 }
 
 void mrc_common_dram_init_banksize(void)

arch/x86/cpu/ivybridge/sdram.c

@@ -44,7 +44,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define CMOS_OFFSET_MRC_SEED_S3		156
 #define CMOS_OFFSET_MRC_SEED_CHK	160
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	return mrc_common_board_get_usable_ram_top(total_size);
 }

arch/x86/cpu/qemu/dram.c

@@ -71,7 +71,7 @@ int dram_init_banksize(void)
  * the relocation address, and how far U-Boot is moved by relocation are
  * set in the global data structure.
  */
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	return qemu_get_low_memory_size();
 }

arch/x86/cpu/quark/dram.c

@@ -184,7 +184,7 @@ int dram_init_banksize(void)
  * the relocation address, and how far U-Boot is moved by relocation are
  * set in the global data structure.
  */
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	return gd->ram_size;
 }

arch/x86/cpu/slimbootloader/sdram.c

@@ -48,7 +48,7 @@ static struct sbl_memory_map_info *get_memory_map_info(void)
  * @total_size: The memory size that u-boot occupies
  * Return:    : The top available memory address lower than 4GB
  */
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	struct sbl_memory_map_info *data;
 	int i;

arch/x86/cpu/tangier/sdram.c

@@ -204,7 +204,7 @@ unsigned int install_e820_map(unsigned int max_entries,
  * address, and how far U-Boot is moved by relocation are set in the global
  * data structure.
  */
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	struct sfi_table_simple *sb;
 	struct sfi_mem_entry *mentry;

arch/x86/include/asm/mrc_common.h

@@ -47,7 +47,7 @@ int mrc_add_memory_area(struct memory_info *info, uint64_t start,
  * the relocation address, and how far U-Boot is moved by relocation are
  * set in the global data structure.
  */
-ulong mrc_common_board_get_usable_ram_top(ulong total_size);
+phys_size_t mrc_common_board_get_usable_ram_top(phys_size_t total_size);
 
 void mrc_common_dram_init_banksize(void);
 

arch/x86/include/asm/u-boot-x86.h

@@ -77,7 +77,7 @@ int x86_cleanup_before_linux(void);
 void x86_enable_caches(void);
 void x86_disable_caches(void);
 int x86_init_cache(void);
-ulong board_get_usable_ram_top(ulong total_size);
+phys_size_t board_get_usable_ram_top(phys_size_t total_size);
 int default_print_cpuinfo(void);
 
 /* Set up a UART which can be used with printch(), printhex8(), etc. */

arch/x86/lib/fsp1/fsp_dram.c

@@ -34,7 +34,7 @@ int dram_init(void)
  * the relocation address, and how far U-Boot is moved by relocation are
  * set in the global data structure.
  */
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	return fsp_get_usable_lowmem_top(gd->arch.hob_list);
 }

arch/x86/lib/fsp2/fsp_dram.c

@@ -77,7 +77,7 @@ int dram_init(void)
 	return 0;
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	if (!ll_boot_init())
 		return gd->ram_size;

board/broadcom/bcmns3/ns3.c

@@ -183,7 +183,7 @@ int dram_init_banksize(void)
 }
 
 /* Limit RAM used by U-Boot to the DDR first bank End region */
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	return BCM_NS3_MEM_END;
 }

board/imgtec/boston/ddr.c

@@ -23,7 +23,7 @@ int dram_init(void)
 	return 0;
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 

board/menlo/m53menlo/m53menlo.c

@@ -42,7 +42,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static u32 mx53_dram_size[2];
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	/*
 	 * WARNING: We must override get_effective_memsize() function here

board/raspberrypi/rpi/rpi.c

@@ -335,7 +335,7 @@ static void set_fdt_addr(void)
 /*
  * Prevent relocation from stomping on a firmware provided FDT blob.
  */
-unsigned long board_get_usable_ram_top(unsigned long total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	if ((gd->ram_top - fw_dtb_pointer) > SZ_64M)
 		return gd->ram_top;

board/ti/am65x/evm.c

@@ -61,7 +61,7 @@ int dram_init(void)
 	return 0;
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 #ifdef CONFIG_PHYS_64BIT
 	/* Limit RAM used by U-Boot to the DDR low region */

board/ti/j721e/evm.c

@@ -57,7 +57,7 @@ int dram_init(void)
 	return 0;
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 #ifdef CONFIG_PHYS_64BIT
 	/* Limit RAM used by U-Boot to the DDR low region */

board/ti/j721s2/evm.c

@@ -46,7 +46,7 @@ int dram_init(void)
 	return 0;
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 #ifdef CONFIG_PHYS_64BIT
 	/* Limit RAM used by U-Boot to the DDR low region */

board/xilinx/common/board.c

@@ -631,7 +631,7 @@ int embedded_dtb_select(void)
 #endif
 
 #if defined(CONFIG_LMB)
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 	phys_size_t size;
 	phys_addr_t reg;

common/board_f.c

@@ -305,7 +305,7 @@ __weak int mach_cpu_init(void)
 }
 
 /* Get the top of usable RAM */
-__weak ulong board_get_usable_ram_top(ulong total_size)
+__weak phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 {
 #if defined(CONFIG_SYS_SDRAM_BASE) && CONFIG_SYS_SDRAM_BASE > 0
 	/*

include/init.h

@@ -291,7 +291,7 @@ int show_board_info(void);
  *
  * @param total_size	Size of U-Boot (unused?)
  */
-ulong board_get_usable_ram_top(ulong total_size);
+phys_size_t board_get_usable_ram_top(phys_size_t total_size);
 
 int board_early_init_f(void);