mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-15 15:53:26 +08:00
Code Issues Packages Projects Releases Wiki Activity
fb91d5675e
u-boot/tools/imx8m_image.sh

47 lines
2.2 KiB
Bash
Raw Normal View History

imx: imx8mq: build flash.bin Build flash.bin for i.MX8MQ, it will include signed hdmi firmware, spl, ddr firmware, fit image(bl31.bin, u-boot-nodtb.bin, dtb). Burn it to 33KB offset of SD card. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-20 18:19:46 +08:00
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0+
#
# script to check whether the file exists in imximage.cfg for i.MX8M
#
file=$1
post_process=$2
blobs=`awk '/^SIGNED_HDMI/ {print $2} /^LOADER/ {print $2} /^SECOND_LOADER/ {print $2} /^DDR_FW/ {print $2}' $file`
for f in $blobs; do
tools/imx8m_image.sh: remove bashism Use a single '=' to test string equality for compatibility with non-bash shells. Otherwise, if /bin/sh is dash, build fails: ./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator ./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator ./tools/imx8m_image.sh: 15: [: spl/u-boot-spl-ddr.bin: unexpected operator ./tools/imx8m_image.sh: 15: [: spl/u-boot-spl-ddr.bin: unexpected operator WARNING './spl/u-boot-spl-ddr.bin' not found, resulting binary is not-functional Signed-off-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Chris Spencer <christopher.spencer@sea.co.uk>
2019-01-02 14:58:28 +08:00
if [ $f = "spl/u-boot-spl-ddr.bin" ] || [ $f = "u-boot.itb" ]; then
imx: imx8mq: build flash.bin Build flash.bin for i.MX8MQ, it will include signed hdmi firmware, spl, ddr firmware, fit image(bl31.bin, u-boot-nodtb.bin, dtb). Burn it to 33KB offset of SD card. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-20 18:19:46 +08:00
continue
fi
tools: imx8m_image: fix warning message When a firmware file is missing the warning message doesn't indicate the firmware file name because '$tmp' var doesn't exist. Fix the warning message and while at it reduce the if/else statement. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2020-01-21 18:58:42 +08:00
if [ ! -f $f ]; then
echo "WARNING '$f' not found, resulting binary is not-functional" >&2
imx: imx8mq: build flash.bin Build flash.bin for i.MX8MQ, it will include signed hdmi firmware, spl, ddr firmware, fit image(bl31.bin, u-boot-nodtb.bin, dtb). Burn it to 33KB offset of SD card. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-20 18:19:46 +08:00
exit 1
fi
done
tools/imx8m_image.sh: remove bashism Use a single '=' to test string equality for compatibility with non-bash shells. Otherwise, if /bin/sh is dash, build fails: ./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator ./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator ./tools/imx8m_image.sh: 15: [: spl/u-boot-spl-ddr.bin: unexpected operator ./tools/imx8m_image.sh: 15: [: spl/u-boot-spl-ddr.bin: unexpected operator WARNING './spl/u-boot-spl-ddr.bin' not found, resulting binary is not-functional Signed-off-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Chris Spencer <christopher.spencer@sea.co.uk>
2019-01-02 14:58:28 +08:00
if [ $post_process = 1 ]; then
tools: imx8m_image: Change source path for DDR firmware to build dir The DDR firmware binaries are not part of the U-Boot source code, so we should look for them in the build directory, where they need to be copied to before building U-Boot. The ATF binary is already fetched from the build directory, but the README files for the i.MX8M EVKs claim that it needs to be copied to the source directory (which is still true for in-tree builds, but not in general). Therefore we also fix the READMEs to use the build directory as the correct location for all additional binary files. Sined-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-12-11 18:06:06 +08:00
if [ -f lpddr4_pmu_train_1d_imem.bin ]; then
objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 lpddr4_pmu_train_1d_imem.bin lpddr4_pmu_train_1d_imem_pad.bin
objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 lpddr4_pmu_train_1d_dmem.bin lpddr4_pmu_train_1d_dmem_pad.bin
objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 lpddr4_pmu_train_2d_imem.bin lpddr4_pmu_train_2d_imem_pad.bin
imx: imx8mq: build flash.bin Build flash.bin for i.MX8MQ, it will include signed hdmi firmware, spl, ddr firmware, fit image(bl31.bin, u-boot-nodtb.bin, dtb). Burn it to 33KB offset of SD card. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-20 18:19:46 +08:00
cat lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin > lpddr4_pmu_train_1d_fw.bin
tools: imx8m_image: Change source path for DDR firmware to build dir The DDR firmware binaries are not part of the U-Boot source code, so we should look for them in the build directory, where they need to be copied to before building U-Boot. The ATF binary is already fetched from the build directory, but the README files for the i.MX8M EVKs claim that it needs to be copied to the source directory (which is still true for in-tree builds, but not in general). Therefore we also fix the READMEs to use the build directory as the correct location for all additional binary files. Sined-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-12-11 18:06:06 +08:00
cat lpddr4_pmu_train_2d_imem_pad.bin lpddr4_pmu_train_2d_dmem.bin > lpddr4_pmu_train_2d_fw.bin
tools: imx8m_image: align spl bin image size The loader for the DDR firmware in drivers/ddr/imx/imx8m/helper.c uses a 4-byte-aligned address to load the firmware. In cases where OF is enabled in SPL the dtb will be appended to the SPL binary and can result in a binary that is not aligned correctly. If OF is not enabled in SPL, `_end` is already aligned correctly, but this patch does not hurt. To ensure the correct alignment we use dd to create a temporary file u-boot-spl-pad.bin with the correct padding. Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-27 14:24:43 +08:00
dd if=spl/u-boot-spl.bin of=spl/u-boot-spl-pad.bin bs=4 conv=sync
cat spl/u-boot-spl-pad.bin lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin > spl/u-boot-spl-ddr.bin
rm -f lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin lpddr4_pmu_train_2d_imem_pad.bin spl/u-boot-spl-pad.bin
imx: imx8mq: build flash.bin Build flash.bin for i.MX8MQ, it will include signed hdmi firmware, spl, ddr firmware, fit image(bl31.bin, u-boot-nodtb.bin, dtb). Burn it to 33KB offset of SD card. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-20 18:19:46 +08:00
fi
tools: imx8m_image: Change source path for DDR firmware to build dir The DDR firmware binaries are not part of the U-Boot source code, so we should look for them in the build directory, where they need to be copied to before building U-Boot. The ATF binary is already fetched from the build directory, but the README files for the i.MX8M EVKs claim that it needs to be copied to the source directory (which is still true for in-tree builds, but not in general). Therefore we also fix the READMEs to use the build directory as the correct location for all additional binary files. Sined-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-12-11 18:06:06 +08:00
if [ -f ddr4_imem_1d.bin ]; then
objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 ddr4_imem_1d.bin ddr4_imem_1d_pad.bin
objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 ddr4_dmem_1d.bin ddr4_dmem_1d_pad.bin
objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 ddr4_imem_2d.bin ddr4_imem_2d_pad.bin
tools: imx8m_image: support ddr4 firmware some boards use ddr4, not lpddr4, so we need to check ddr4 firmware. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-09-16 11:09:44 +08:00
cat ddr4_imem_1d_pad.bin ddr4_dmem_1d_pad.bin > ddr4_1d_fw.bin
tools: imx8m_image: Change source path for DDR firmware to build dir The DDR firmware binaries are not part of the U-Boot source code, so we should look for them in the build directory, where they need to be copied to before building U-Boot. The ATF binary is already fetched from the build directory, but the README files for the i.MX8M EVKs claim that it needs to be copied to the source directory (which is still true for in-tree builds, but not in general). Therefore we also fix the READMEs to use the build directory as the correct location for all additional binary files. Sined-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-12-11 18:06:06 +08:00
cat ddr4_imem_2d_pad.bin ddr4_dmem_2d.bin > ddr4_2d_fw.bin
tools: imx8m_image: support ddr4 firmware some boards use ddr4, not lpddr4, so we need to check ddr4 firmware. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-09-16 11:09:44 +08:00
dd if=spl/u-boot-spl.bin of=spl/u-boot-spl-pad.bin bs=4 conv=sync
cat spl/u-boot-spl-pad.bin ddr4_1d_fw.bin ddr4_2d_fw.bin > spl/u-boot-spl-ddr.bin
rm -f ddr4_1d_fw.bin ddr4_2d_fw.bin ddr4_imem_1d_pad.bin ddr4_dmem_1d_pad.bin ddr4_imem_2d_pad.bin spl/u-boot-spl-pad.bin
fi
imx: imx8mq: build flash.bin Build flash.bin for i.MX8MQ, it will include signed hdmi firmware, spl, ddr firmware, fit image(bl31.bin, u-boot-nodtb.bin, dtb). Burn it to 33KB offset of SD card. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-20 18:19:46 +08:00
fi
exit 0
Reference in New Issue Copy Permalink