mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-13 14:53:28 +08:00
Code Issues Packages Projects Releases Wiki Activity
d56013d37c
u-boot/drivers/soc/Kconfig

22 lines
669 B
Plaintext
Raw Normal View History

soc: ti: k3: add navss ringacc driver The Ring Accelerator (RINGACC or RA) provides hardware acceleration to enable straightforward passing of work between a producer and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs. The RINGACC converts constant-address read and write accesses to equivalent read or write accesses to a circular data structure in memory. The RINGACC eliminates the need for each DMA controller which needs to access ring elements from having to know the current state of the ring (base address, current offset). The DMA controller performs a read or write access to a specific address range (which maps to the source interface on the RINGACC) and the RINGACC replaces the address for the transaction with a new address which corresponds to the head or tail element of the ring (head for reads, tail for writes). Since the RINGACC maintains the state, multiple DMA controllers or channels are allowed to coherently share the same rings as applicable. The RINGACC is able to place data which is destined towards software into cached memory directly. Supported ring modes: - Ring Mode - Messaging Mode - Credentials Mode - Queue Manager Mode TI-SCI integration: Texas Instrument's System Control Interface (TI-SCI) Message Protocol now has control over Ringacc module resources management (RM) and Rings configuration. The Ringacc driver manages Rings allocation by itself now and requests TI-SCI firmware to allocate and configure specific Rings only. It's done this way because, Linux driver implements two stage Rings allocation and configuration (allocate ring and configure ring) while TI-SCI Message Protocol supports only one combined operation (allocate+configure). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com>
2019-02-05 20:01:22 +08:00
menu "SOC (System On Chip) specific Drivers"
dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matching Introduce UCLASS_SOC to be used for SOC identification and attribute matching based on the SoC ID info. This allows drivers to be provided for SoCs to retrieve SoC identifying information and also for matching device attributes for selecting SoC specific data. This is useful for other device drivers that may need different parameters or quirks enabled depending on the specific device variant in use. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-16 12:39:57 +08:00
config SOC_DEVICE
bool "Enable SoC Device ID drivers using Driver Model"
help
This allows drivers to be provided for SoCs to help in identifying
the SoC in use and matching SoC attributes for selecting SoC
specific data. This is useful for other device drivers that may
need different parameters or quirks enabled depending on the
specific device variant in use.
dm: soc: Introduce soc_ti_k3 driver for TI K3 SoCs Introduce an soc_ti_k3_driver that allows identification and selection of SoC specific data based on the JTAG ID register for device identification, as described for AM65x[0] and J721E[1] devices. [0] http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf [1] http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-16 12:39:59 +08:00
config SOC_DEVICE_TI_K3
depends on SOC_DEVICE
bool "Enable SoC Device ID driver for TI K3 SoCs"
help
This allows Texas Instruments Keystone 3 SoCs to identify
specifics about the SoC in use.
soc: ti: k3: add navss ringacc driver The Ring Accelerator (RINGACC or RA) provides hardware acceleration to enable straightforward passing of work between a producer and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs. The RINGACC converts constant-address read and write accesses to equivalent read or write accesses to a circular data structure in memory. The RINGACC eliminates the need for each DMA controller which needs to access ring elements from having to know the current state of the ring (base address, current offset). The DMA controller performs a read or write access to a specific address range (which maps to the source interface on the RINGACC) and the RINGACC replaces the address for the transaction with a new address which corresponds to the head or tail element of the ring (head for reads, tail for writes). Since the RINGACC maintains the state, multiple DMA controllers or channels are allowed to coherently share the same rings as applicable. The RINGACC is able to place data which is destined towards software into cached memory directly. Supported ring modes: - Ring Mode - Messaging Mode - Credentials Mode - Queue Manager Mode TI-SCI integration: Texas Instrument's System Control Interface (TI-SCI) Message Protocol now has control over Ringacc module resources management (RM) and Rings configuration. The Ringacc driver manages Rings allocation by itself now and requests TI-SCI firmware to allocate and configure specific Rings only. It's done this way because, Linux driver implements two stage Rings allocation and configuration (allocate ring and configure ring) while TI-SCI Message Protocol supports only one combined operation (allocate+configure). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com>
2019-02-05 20:01:22 +08:00
source "drivers/soc/ti/Kconfig"
endmenu
Reference in New Issue Copy Permalink