mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-16 08:13:28 +08:00
Code Issues Packages Projects Releases Wiki Activity
d168bcb6fe
u-boot/configs/xilinx_zynqmp_mini_qspi_defconfig

66 lines
1.8 KiB
Plaintext
Raw Normal View History

arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 19:01:38 +08:00
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_mini_qspi"
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_TEXT_BASE=0xFFFC0000
arm64: zynqmp: Use minimal size for environment variables There is no reason to have huge space for variables because none is using that. But there are some which are setup automatically. baudrate=115200 fdtcontroladdr=ffffa0d0 stderr=dcc stdin=dcc stdout=dcc Environment size: 72/124 bytes Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 22:22:58 +08:00
CONFIG_ENV_SIZE=0x80
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-30 03:54:04 +08:00
CONFIG_NR_DRAM_BANKS=1
arm64: zynqmp: Enable SPL for mini qspi configuration Wire up mini_qspi SPL with zcu102 for testing purpose. Normally mini u-boot runs with FSBL/SPL for certain board. Enabling SPL and configuration from zcu102 helps with testing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 22:03:40 +08:00
CONFIG_SPL=y
arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 19:01:38 +08:00
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
CONFIG_ZYNQMP_NO_DDR=y
arm64: xilinx: zynqmp: Remove unneeded configs Remove unneeded configs from mini qspi configuration so that it saves space for this mini configuration. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-03-19 14:20:52 +08:00
# CONFIG_PSCI_RESET is not set
arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 19:01:38 +08:00
# CONFIG_CMD_ZYNQMP is not set
arm64: xilinx: zynqmp: Remove unneeded configs Remove unneeded configs from mini qspi configuration so that it saves space for this mini configuration. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-03-19 14:20:52 +08:00
# CONFIG_EXPERT is not set
arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 19:01:38 +08:00
# CONFIG_IMAGE_FORMAT_LEGACY is not set
arm64: zynqmp: Handle CONFIG_BOARD_LATE_INIT via Kconfig Disable BOARD_LATE_INIT via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-20 14:24:14 +08:00
# CONFIG_BOARD_LATE_INIT is not set
arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 19:01:38 +08:00
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
# CONFIG_SYS_LONGHELP is not set
CONFIG_SYS_PROMPT="ZynqMP> "
arm64: zynqmp: Disable autoboot feature for mini There is no reason to have autoboot enabled because it should never start anything automatically. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 21:36:51 +08:00
# CONFIG_AUTOBOOT is not set
arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 19:01:38 +08:00
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_BOOTM is not set
# CONFIG_CMD_BOOTI is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_FDT is not set
# CONFIG_CMD_GO is not set
# CONFIG_CMD_RUN is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_SAVEENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_DM is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_SF=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_MISC is not set
arm64: zynqmp: Enable SPL for mini qspi configuration Wire up mini_qspi SPL with zcu102 for testing purpose. Normally mini u-boot runs with FSBL/SPL for certain board. Enabling SPL and configuration from zcu102 helps with testing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 22:03:40 +08:00
CONFIG_SPL_OF_CONTROL=y
arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 19:01:38 +08:00
CONFIG_OF_EMBED=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-04 03:26:12 +08:00
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-qspi"
arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 19:01:38 +08:00
# CONFIG_NET is not set
arm64: zynqmp: Enable SPL for mini qspi configuration Wire up mini_qspi SPL with zcu102 for testing purpose. Normally mini u-boot runs with FSBL/SPL for certain board. Enabling SPL and configuration from zcu102 helps with testing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 22:03:40 +08:00
CONFIG_SPL_DM=y
arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 19:01:38 +08:00
# CONFIG_DM_WARN is not set
# CONFIG_DM_DEVICE_REMOVE is not set
arm64: zynqmp: Enable SPL for mini qspi configuration Wire up mini_qspi SPL with zcu102 for testing purpose. Normally mini u-boot runs with FSBL/SPL for certain board. Enabling SPL and configuration from zcu102 helps with testing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 22:03:40 +08:00
CONFIG_SPL_DM_SEQ_ALIAS=y
arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 19:01:38 +08:00
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
arm64: zynqmp: Enable ISSI flash for some platforms Enable ISSI flash for platforms. Xilinx reference boards are also used internally with different flash part to increase coverage that's why enable also ISSI parts for all these boards even if that board is released only with one part. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-15 17:45:41 +08:00
CONFIG_SPI_FLASH_ISSI=y
arm64: zynqmp: Add QSPI flash mini u-boot configuration Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-18 19:01:38 +08:00
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI=y
CONFIG_ZYNQMP_GQSPI=y
# CONFIG_EFI_LOADER is not set
Reference in New Issue Copy Permalink