u-boot/include/configs/bcm7445.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2018  Cisco Systems, Inc.
 *
 * Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
 *
 * Configuration settings for the Broadcom BCM7445 SoC family.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CFG_SYS_INIT_RAM_ADDR	0x80200000

#include "bcmstb.h"

#define BCMSTB_TIMER_LOW	0xf0412008
#define BCMSTB_TIMER_HIGH	0xf041200c
#define BCMSTB_TIMER_FREQUENCY	0xf0412020
#define BCMSTB_HIF_MSPI_BASE	0xf03e3400
#define BCMSTB_BSPI_BASE	0xf03e3200
#define BCMSTB_HIF_SPI_INTR2	0xf03e1a00
#define BCMSTB_CS_REG		0xf03e0920

/*
 * Environment configuration for SPI flash.
 */

#endif	/* __CONFIG_H */
board: arm: Add support for Broadcom BCM7445 Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Florian Fainelli <f.fainelli@gmail.com> 2018-06-09 05:59:45 +08:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
			`/*`
			`* (C) Copyright 2018 Cisco Systems, Inc.`
			`*`
			`* Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>`
			`*`
			`* Configuration settings for the Broadcom BCM7445 SoC family.`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2022-11-17 02:10:41 +08:00			`#define CFG_SYS_INIT_RAM_ADDR 0x80200000`
arm: bcm7445: Move config defines to bcm7445.h Move some configuration #defines that do not apply to other bcmstb boards from bcmstb.h to bcm7445.h. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> 2018-07-27 11:02:47 +08:00
			`#include "bcmstb.h"`

board: arm: Add support for Broadcom BCM7445 Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Florian Fainelli <f.fainelli@gmail.com> 2018-06-09 05:59:45 +08:00			`#define BCMSTB_TIMER_LOW 0xf0412008`
			`#define BCMSTB_TIMER_HIGH 0xf041200c`
			`#define BCMSTB_TIMER_FREQUENCY 0xf0412020`
			`#define BCMSTB_HIF_MSPI_BASE 0xf03e3400`
			`#define BCMSTB_BSPI_BASE 0xf03e3200`
			`#define BCMSTB_HIF_SPI_INTR2 0xf03e1a00`
			`#define BCMSTB_CS_REG 0xf03e0920`

arm: bcm7445: Change serial console index Change the configured serial console index to reflect that it is the first physical UART, reorder some defconfig lines and move some environment configuration from bcmstb.h to bcm7445.h. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Florian Fainelli <f.fainelli@gmail.com> 2018-08-23 06:37:54 +08:00			`/*`
			`* Environment configuration for SPI flash.`
			`*/`

board: arm: Add support for Broadcom BCM7445 Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Florian Fainelli <f.fainelli@gmail.com> 2018-06-09 05:59:45 +08:00			`#endif /* __CONFIG_H */`