mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-30 07:03:43 +08:00
Code Issues Packages Projects Releases Wiki Activity
b6f11098c9
u-boot/include/configs/rockchip-common.h

88 lines
2.0 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 05:58:06 +08:00
/* SPDX-License-Identifier: GPL-2.0+ */
rockchip: use rockchip linux partitions layout Unify the partitions of each chip then it will be more easy for us to write scripts, tools or guides for rockchip chips. Those extra partitions mostly are used to be compatible with our internal loaders (such as miniloader which was same as spl, or android loader then we can support dual boot) Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-08 13:47:41 +08:00
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*/
#ifndef _ROCKCHIP_COMMON_H_
#define _ROCKCHIP_COMMON_H_
#include <linux/sizes.h>
rockchip: set SYS_NS16550_MEM32 for all SoCs Add back part of patch send out as 'rockchip: enable SYS_NS16550 for all SoCs by default' that seems to have gotten lost when it got merged to set SYS_NS16550_MEM32. Allows serial output to work on tinker-rk3288 again after c3c0331db1fb7b1f4ff41e144fc04353b37c785c. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-05-08 18:43:01 +08:00
#define CONFIG_SYS_NS16550_MEM32
rockchip: Add Single boot image (with binman, pad_cat) All rockchip platforms support TPL or SPL-based bootloader in mainline with U-Boot proper as final stage. For each stage we need to burn the image on to flash with respective offsets. This patch creates a single boot image component using - binman, for arm32 rockchip platforms - pad_cat, for arm64 rockchip platforms. This would help users to get rid of burning different boot stage images. The new image called 'u-boot-rockchip.bin' which can burn into flash like: ₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64 This would support all rockchip platforms, except rk3128 since it doesn't support for SPL yet. Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Cc: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-10 02:46:21 +08:00
/* ((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512) */
#define CONFIG_SPL_PAD_TO 8355840
rockchip: use rockchip linux partitions layout Unify the partitions of each chip then it will be more easy for us to write scripts, tools or guides for rockchip chips. Those extra partitions mostly are used to be compatible with our internal loaders (such as miniloader which was same as spl, or android loader then we can support dual boot) Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-08 13:47:41 +08:00
#ifndef CONFIG_SPL_BUILD
rockchip: configs: only add available BOOT_TARGET_DEVICES BOOT_TARGET_DEVICES should only be added if the corresponding u-boot command is enabled. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-07 01:24:08 +08:00
/* First try to boot from SD (index 0), then eMMC (index 1) */
#if CONFIG_IS_ENABLED(CMD_MMC)
#define BOOT_TARGET_MMC(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1)
rockchip: Add USB to the default boot targets Now that most rockchip SoC based board have usb host support, enable USB boot targets by default. Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Fixed build errors when CONFIG_CMD_USB not defined: Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-01 14:49:54 +08:00
#else
rockchip: configs: only add available BOOT_TARGET_DEVICES BOOT_TARGET_DEVICES should only be added if the corresponding u-boot command is enabled. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-07 01:24:08 +08:00
#define BOOT_TARGET_MMC(func)
rockchip: Add USB to the default boot targets Now that most rockchip SoC based board have usb host support, enable USB boot targets by default. Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Fixed build errors when CONFIG_CMD_USB not defined: Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-01 14:49:54 +08:00
#endif
rockchip: use rockchip linux partitions layout Unify the partitions of each chip then it will be more easy for us to write scripts, tools or guides for rockchip chips. Those extra partitions mostly are used to be compatible with our internal loaders (such as miniloader which was same as spl, or android loader then we can support dual boot) Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-08 13:47:41 +08:00
rk3399: Enable NVMe distro bootcmd Include NVME in the list of boot targets if CONFIG_NVME is enabled. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-25 05:10:34 +08:00
#if CONFIG_IS_ENABLED(CMD_NVME)
#define BOOT_TARGET_NVME(func) func(NVME, nvme, 0)
#else
#define BOOT_TARGET_NVME(func)
#endif
rockchip: configs: only add available BOOT_TARGET_DEVICES BOOT_TARGET_DEVICES should only be added if the corresponding u-boot command is enabled. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-07 01:24:08 +08:00
#if CONFIG_IS_ENABLED(CMD_USB)
#define BOOT_TARGET_USB(func) func(USB, usb, 0)
#else
#define BOOT_TARGET_USB(func)
#endif
#if CONFIG_IS_ENABLED(CMD_PXE)
#define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
#else
#define BOOT_TARGET_PXE(func)
#endif
#if CONFIG_IS_ENABLED(CMD_DHCP)
#define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
#else
#define BOOT_TARGET_DHCP(func)
#endif
rk3399: Enable SF distro bootcmd Enable SPI flash(SF) distro boot command in rk3399. This distro boot will read the boot script at specific location at the flash and start sourcing the same. Included the SF device at the last of the target devices list since all the rest of the devices on the list have more possibility to boot the distribution due to the size of the SPI flash is concern. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-11 02:26:31 +08:00
#if CONFIG_IS_ENABLED(CMD_SF)
#define BOOT_TARGET_SF(func) func(SF, sf, 0)
#else
#define BOOT_TARGET_SF(func)
#endif
#ifdef CONFIG_ROCKCHIP_RK3399
#define BOOT_TARGET_DEVICES(func) \
BOOT_TARGET_MMC(func) \
rk3399: Enable NVMe distro bootcmd Include NVME in the list of boot targets if CONFIG_NVME is enabled. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-25 05:10:34 +08:00
BOOT_TARGET_NVME(func) \
rk3399: Enable SF distro bootcmd Enable SPI flash(SF) distro boot command in rk3399. This distro boot will read the boot script at specific location at the flash and start sourcing the same. Included the SF device at the last of the target devices list since all the rest of the devices on the list have more possibility to boot the distribution due to the size of the SPI flash is concern. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-11 02:26:31 +08:00
BOOT_TARGET_USB(func) \
BOOT_TARGET_PXE(func) \
BOOT_TARGET_DHCP(func) \
BOOT_TARGET_SF(func)
#else
rockchip: configs: only add available BOOT_TARGET_DEVICES BOOT_TARGET_DEVICES should only be added if the corresponding u-boot command is enabled. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-07 01:24:08 +08:00
#define BOOT_TARGET_DEVICES(func) \
BOOT_TARGET_MMC(func) \
BOOT_TARGET_USB(func) \
BOOT_TARGET_PXE(func) \
BOOT_TARGET_DHCP(func)
rk3399: Enable SF distro bootcmd Enable SPI flash(SF) distro boot command in rk3399. This distro boot will read the boot script at specific location at the flash and start sourcing the same. Included the SF device at the last of the target devices list since all the rest of the devices on the list have more possibility to boot the distribution due to the size of the SPI flash is concern. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-11 02:26:31 +08:00
#endif
rockchip: configs: only add available BOOT_TARGET_DEVICES BOOT_TARGET_DEVICES should only be added if the corresponding u-boot command is enabled. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-07 01:24:08 +08:00
rockchip: use UUID for root partitions We use to use /dev/mmcbl0p7 as root partition, and pass it to kernel by cmdline, but the mmc number in kernel in not fixed, we need to change the bootargs to adapt it from time to time. We can use the UUID to fix it, the ID is from: https://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec/ ARM 32bit: 69dad710-2ce4-4e3c-b16c-21a1d49abed3 ARM 64bit: b921b045-1df0-41c3-af44-4c6f280d3fae Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-25 12:00:05 +08:00
#ifdef CONFIG_ARM64
#define ROOT_UUID "B921B045-1DF0-41C3-AF44-4C6F280D3FAE;\0"
#else
#define ROOT_UUID "69DAD710-2CE4-4E3C-B16C-21A1D49ABED3;\0"
#endif
rockchip: use rockchip linux partitions layout Unify the partitions of each chip then it will be more easy for us to write scripts, tools or guides for rockchip chips. Those extra partitions mostly are used to be compatible with our internal loaders (such as miniloader which was same as spl, or android loader then we can support dual boot) Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-08 13:47:41 +08:00
#define PARTS_DEFAULT \
"uuid_disk=${uuid_gpt_disk};" \
"name=loader1,start=32K,size=4000K,uuid=${uuid_gpt_loader1};" \
rockchip: config: update part table User do not need to access the reserved part in system, remove them from partition table. Rename atf to trust as generic name for armv7 do not use ATF. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-31 16:52:23 +08:00
"name=loader2,start=8MB,size=4MB,uuid=${uuid_gpt_loader2};" \
"name=trust,size=4M,uuid=${uuid_gpt_atf};" \
rockchip: configs: correct partitions 'boot' size It should be 112M, to make rootfs start at 0x40000 Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-11-15 16:55:27 +08:00
"name=boot,size=112M,bootable,uuid=${uuid_gpt_boot};" \
rockchip: use UUID for root partitions We use to use /dev/mmcbl0p7 as root partition, and pass it to kernel by cmdline, but the mmc number in kernel in not fixed, we need to change the bootargs to adapt it from time to time. We can use the UUID to fix it, the ID is from: https://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec/ ARM 32bit: 69dad710-2ce4-4e3c-b16c-21a1d49abed3 ARM 64bit: b921b045-1df0-41c3-af44-4c6f280d3fae Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-25 12:00:05 +08:00
"name=rootfs,size=-,uuid="ROOT_UUID
rockchip: use rockchip linux partitions layout Unify the partitions of each chip then it will be more easy for us to write scripts, tools or guides for rockchip chips. Those extra partitions mostly are used to be compatible with our internal loaders (such as miniloader which was same as spl, or android loader then we can support dual boot) Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2016-10-08 13:47:41 +08:00
#endif
#endif /* _ROCKCHIP_COMMON_H_ */
Reference in New Issue Copy Permalink