u-boot/configs/A33-OLinuXino_defconfig

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=432
CONFIG_DRAM_ZQ=15291
CONFIG_DRAM_ODT_EN=y
CONFIG_MMC0_CD_PIN="PB4"
CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
CONFIG_USB0_ID_DET="PB3"
CONFIG_AXP_GPIO=y
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_BL_EN="PB2"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-olinuxino"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DCDC1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
sunxi: Add support for A33-OLinuXino board A33-OLinuXino is A33 development board designed by Olimex LTD. It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector, headphone and mic jacks, connector for LiPo battery and optional 4GB NAND Flash. It has two 40-pin headers. One for LCD panel, and one for additional modules. Also there is CSI/DSI connector. The dts files are identical to the ones submitted to the upstream kernel. Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-09-02 20:21:37 +08:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_SUNXI=y`
			`CONFIG_MACH_SUN8I_A33=y`
			`CONFIG_DRAM_CLK=432`
			`CONFIG_DRAM_ZQ=15291`
			`CONFIG_DRAM_ODT_EN=y`
			`CONFIG_MMC0_CD_PIN="PB4"`
			`CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"`
			`CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"`
			`CONFIG_USB0_ID_DET="PB3"`
configs: Resync with savedefconfig Signed-off-by: Tom Rini <trini@konsulko.com> 2016-09-09 04:11:59 +08:00			`CONFIG_AXP_GPIO=y`
			`CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"`
			`CONFIG_VIDEO_LCD_DCLK_PHASE=0`
			`CONFIG_VIDEO_LCD_BL_EN="PB2"`
			`CONFIG_VIDEO_LCD_BL_PWM="PH0"`
sunxi: Add support for A33-OLinuXino board A33-OLinuXino is A33 development board designed by Olimex LTD. It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector, headphone and mic jacks, connector for LiPo battery and optional 4GB NAND Flash. It has two 40-pin headers. One for LCD panel, and one for additional modules. Also there is CSI/DSI connector. The dts files are identical to the ones submitted to the upstream kernel. Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-09-02 20:21:37 +08:00			`CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-olinuxino"`
			`# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set`
			`CONFIG_SPL=y`
			`# CONFIG_CMD_IMLS is not set`
			`# CONFIG_CMD_FLASH is not set`
			`# CONFIG_CMD_FPGA is not set`
disk: convert CONFIG_DOS_PARTITION to Kconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> 2017-01-27 18:00:37 +08:00			`# CONFIG_SPL_DOS_PARTITION is not set`
sunxi: Add support for A33-OLinuXino board A33-OLinuXino is A33 development board designed by Olimex LTD. It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector, headphone and mic jacks, connector for LiPo battery and optional 4GB NAND Flash. It has two 40-pin headers. One for LCD panel, and one for additional modules. Also there is CSI/DSI connector. The dts files are identical to the ones submitted to the upstream kernel. Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-09-02 20:21:37 +08:00			`CONFIG_AXP_DCDC1_VOLT=3300`
configs: Resync with savedefconfig Signed-off-by: Tom Rini <trini@konsulko.com> 2016-09-09 04:11:59 +08:00			`CONFIG_USB_MUSB_HOST=y`