u-boot/drivers/net/fm/p4080.c

100 lines
2.6 KiB
C
Raw Normal View History

powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 21:37:44 +08:00
/*
* Copyright 2011 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 21:37:44 +08:00
*/
#include <common.h>
#include <phy.h>
#include <fm_eth.h>
#include <asm/io.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_serdes.h>
static u32 port_to_devdisr[] = {
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 21:37:44 +08:00
[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
[FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
[FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1,
[FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1,
[FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2,
[FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3,
[FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4,
[FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2,
};
static int is_device_disabled(enum fm_port port)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 devdisr2 = in_be32(&gur->devdisr2);
return port_to_devdisr[port] & devdisr2;
}
void fman_disable_port(enum fm_port port)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/* don't allow disabling of DTSEC1 as its needed for MDIO */
if (port == FM1_DTSEC1)
return;
setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
}
void fman_enable_port(enum fm_port port)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
clrbits_be32(&gur->devdisr2, port_to_devdisr[port]);
}
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 21:37:44 +08:00
phy_interface_t fman_port_enet_if(enum fm_port port)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
if (is_device_disabled(port))
return PHY_INTERFACE_MODE_NONE;
if ((port == FM1_10GEC1) && (is_serdes_configured(XAUI_FM1)))
return PHY_INTERFACE_MODE_XGMII;
if ((port == FM2_10GEC1) && (is_serdes_configured(XAUI_FM2)))
return PHY_INTERFACE_MODE_XGMII;
/* handle RGMII first */
if ((port == FM1_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) ==
FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1))
return PHY_INTERFACE_MODE_RGMII;
if ((port == FM1_DTSEC2) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2))
return PHY_INTERFACE_MODE_RGMII;
if ((port == FM2_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))
return PHY_INTERFACE_MODE_RGMII;
switch (port) {
case FM1_DTSEC1:
case FM1_DTSEC2:
case FM1_DTSEC3:
case FM1_DTSEC4:
if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
return PHY_INTERFACE_MODE_SGMII;
break;
case FM2_DTSEC1:
case FM2_DTSEC2:
case FM2_DTSEC3:
case FM2_DTSEC4:
if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1))
return PHY_INTERFACE_MODE_SGMII;
break;
default:
return PHY_INTERFACE_MODE_NONE;
}
return PHY_INTERFACE_MODE_NONE;
}