mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-04 18:13:31 +08:00
Code Issues Packages Projects Releases Wiki Activity
a2a63a35b2
u-boot/configs/mx6sabreauto_defconfig

68 lines
1.5 KiB
Plaintext
Raw Normal View History

mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
configs: Migrate CONFIG_SYS_TEXT_BASE On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-04 01:10:38 +08:00
CONFIG_SYS_TEXT_BASE=0x17800000
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
mx6sabreauto: Update to SPL only mode As mx6sabreauto supports SPL now, all variants can boot using the same defconfig. This patch: - Removes non-SPL targets. - Renames target to mx6sabreauto_defconfig. - Renames folder and board files to mx6sabreauto. - Updates MAINTAINERS, Makefile and Kconfig accordingly. - Removes .cfg files. - Adds a README with instructions to build and flash SPL and u-boot.img. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:46 +08:00
CONFIG_TARGET_MX6SABREAUTO=y
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-08 08:27:54 +08:00
CONFIG_SPL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 23:57:37 +08:00
CONFIG_SPL_LIBDISK_SUPPORT=y
imx: Add a common way for detecting NXP boards revision NXP development boards based on i.MX6/i.MX7 contain the board revision information stored in the fuses. Introduce a common function that can be shared by different boards and convert mx6sabreauto to use this new mechanism. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-27 20:25:09 +08:00
CONFIG_NXP_BOARD_REVISION=y
configs: Migrate CONFIG_NR_DRAM_BANKS We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 20:16:24 +08:00
CONFIG_NR_DRAM_BANKS=1
mx6sabreauto: Remove unneeded SPL selection SPL option is already selected via Kconfig, so remove it from the CONFIG_SYS_EXTRA_OPTIONS line. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-16 03:04:04 +08:00
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 21:58:59 +08:00
CONFIG_SUPPORT_RAW_INITRD=y
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
CONFIG_SPL_EXT_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 23:57:37 +08:00
CONFIG_SPL_WATCHDOG_SUPPORT=y
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 07:58:53 +08:00
CONFIG_CMD_DFU=y
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
# CONFIG_CMD_FLASH is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 07:58:53 +08:00
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
CONFIG_CMD_MMC=y
configs: Migrate CMD_NAND* Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the defconfig files. Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-29 09:31:42 +08:00
CONFIG_CMD_NAND_TRIMFFS=y
mx6sabre: Use PARTUUID to specify the rootfs location mx6sabre boards can run different kernel versions, such as NXP 4.1 or mainline. Currently the rootfs location is passed via mmcblk number and the problem with this approach is that the mmcblk number for the eMMC changes depending on the kernel version. In order to avoid such issue, use UUID method to specify the rootfs location. Succesfully tested booting a NXP 4.1 and also a mainline kernel on a mx6qsabresd and mx6dlsabreauto. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-07-11 02:59:12 +08:00
CONFIG_CMD_PART=y
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28 19:16:32 +08:00
CONFIG_ENV_IS_IN_MMC=y
Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
2018-04-02 00:37:53 +08:00
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
CONFIG_DFU_MMC=y
CONFIG_DFU_SF=y
treewide: Migrate CONFIG_FSL_ESDHC to Kconfig Migrate the CONFIG_FSL_ESDHC option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-03-28 20:38:19 +08:00
CONFIG_FSL_ESDHC=y
Convert CONFIG_NAND_MXS to Kconfig This converts CONFIG_NAND_MXS to Kconfig. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-06 16:44:37 +08:00
CONFIG_NAND=y
CONFIG_NAND_MXS=y
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
Move PHYLIB to Kconfig Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-02 08:19:59 +08:00
CONFIG_PHYLIB=y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 12:03:57 +08:00
CONFIG_MII=y
Convert CONFIG_SPI to Kconfig This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-16 01:51:26 +08:00
CONFIG_SPI=y
spi: Migrate CONFIG_MXC_SPI to Kconfig Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-02-07 08:42:19 +08:00
CONFIG_MXC_SPI=y
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
usb: gadget: Make g_dnl USB settings common The g_dnl USB settings for the vendor ID, product ID and manufacturer are actually common settings that can and should be shared by all the gadgets. Make them common by renaming them, and convert all the users. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-07 14:58:08 +08:00
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and LAN78XX options under new menu. Finally update the defconfigs that need CONFIG_USB_HOST_ETHER. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-28 16:50:45 +08:00
CONFIG_USB_HOST_ETHER=y
usb: net: migrate USB Ethernet adapters to Kconfig This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig. Update defconfigs. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-28 16:50:46 +08:00
CONFIG_USB_ETHER_ASIX=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-31 00:58:33 +08:00
CONFIG_VIDEO=y
mx6qsabreauto: Add SPL support Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-06-29 20:33:45 +08:00
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_OF_LIBFDT=y
Reference in New Issue Copy Permalink