u-boot/configs/Lamobo_R1_defconfig

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
CONFIG_MMC0_CD_PIN="PH10"
CONFIG_GMAC_TX_DELAY=4
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,SATAPWR=SUNXI_GPB(3)"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
sunxi: Add support for the Lamobo R1 board The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. The dts file is identical to the one submitted upstream. Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-10-18 22:34:13 +08:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_SUNXI=y`
Convert CONFIG_SPL_I2C_SUPPORT to Kconfig Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org> 2016-09-13 13:18:40 +08:00			`CONFIG_SPL_I2C_SUPPORT=y`
sunxi: Add support for the Lamobo R1 board The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. The dts file is identical to the one submitted upstream. Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-10-18 22:34:13 +08:00			`CONFIG_MACH_SUN7I=y`
			`CONFIG_DRAM_CLK=432`
			`CONFIG_MMC0_CD_PIN="PH10"`
			`CONFIG_GMAC_TX_DELAY=4`
			`CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"`
			`# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set`
			`CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,SATAPWR=SUNXI_GPB(3)"`
Kconfig: Move SPL settings into their own file Move the SPL settings into common/spl where most of the SPL code is kept. Signed-off-by: Simon Glass <sjg@chromium.org> 2016-09-13 13:18:22 +08:00			`CONFIG_SPL=y`
sunxi: Add support for the Lamobo R1 board The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. The dts file is identical to the one submitted upstream. Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-10-18 22:34:13 +08:00			`# CONFIG_CMD_IMLS is not set`
			`# CONFIG_CMD_FLASH is not set`
			`# CONFIG_CMD_FPGA is not set`
			`CONFIG_ETH_DESIGNWARE=y`
			`CONFIG_USB_EHCI_HCD=y`