mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-18 17:23:25 +08:00
Code Issues Packages Projects Releases Wiki Activity
9935050b44
u-boot/.gitlab-ci.yml

416 lines
11 KiB
YAML
Raw Normal View History

gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
# SPDX-License-Identifier: GPL-2.0+
# Grab our configured image. The source for this is found at:
# https://gitlab.denx.de/u-boot/gitlab-ci-runner
Azure/GitLab: Update to latest Docker container - New base snapshot - Fix for high UID/GID numbers on a toolchain Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-02 21:22:29 +08:00
image: trini/u-boot-gitlab-ci-runner:bionic-20200807-02Sep2020
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
# We run some tests in different order, to catch some failures quicker.
stages:
- testsuites
gitlab-ci: Switch to a Docker image that contains a QEMU we build Rather than buiding QEMU for each test.py build it once in our Dockerfile and re-use it as needed. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-25 01:09:31 +08:00
- test.py
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
- world build
.buildman_and_testpy_template: &buildman_and_testpy_dfn
tags: [ 'all' ]
stage: test.py
before_script:
# Clone uboot-test-hooks
- git clone --depth=1 git://github.com/swarren/uboot-test-hooks.git /tmp/uboot-test-hooks
- ln -s travis-ci /tmp/uboot-test-hooks/bin/`hostname`
- ln -s travis-ci /tmp/uboot-test-hooks/py/`hostname`
gitlab-ci: Switch to Ubuntu 18.04 image In order to run all filesystem tests we need to have newer ext4 tools, move up to Ubuntu 18.04 'bionic' for our base. We need to change slightly how we invoke the provided grub-mkimage. This will also make future python3 work easier. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-05 00:12:54 +08:00
- grub-mkimage --prefix="" -o ~/grub_x86.efi -O i386-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd
- grub-mkimage --prefix="" -o ~/grub_x64.efi -O x86_64-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd
azure/gitlab/travis: Add RISC-V SPL testing This adds QEMU RISC-V 32/64 SPL testing. Unlike QEMU RISC-V 32/64, we test SPL running in M-mode and U-Boot proper running in S-mode, with a 4-core SMP configuration. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-28 22:25:29 +08:00
- if [[ "${TEST_PY_BD}" == "qemu-riscv32_spl" ]]; then
azure: gitlab: travis: Update OpenSBI used for RISC-V testing Change to use OpenSBI release v0.8 generic platform images for QEMU RISC-V CI testing for azure, gitlab and travis-ci. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-20 11:52:23 +08:00
wget -O - https://github.com/riscv/opensbi/releases/download/v0.8/opensbi-0.8-rv-bin.tar.xz | tar -C /tmp -xJ;
export OPENSBI=/tmp/opensbi-0.8-rv-bin/share/opensbi/ilp32/generic/firmware/fw_dynamic.bin;
azure/gitlab/travis: Add RISC-V SPL testing This adds QEMU RISC-V 32/64 SPL testing. Unlike QEMU RISC-V 32/64, we test SPL running in M-mode and U-Boot proper running in S-mode, with a 4-core SMP configuration. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-28 22:25:29 +08:00
fi
- if [[ "${TEST_PY_BD}" == "qemu-riscv64_spl" ]]; then
azure: gitlab: travis: Update OpenSBI used for RISC-V testing Change to use OpenSBI release v0.8 generic platform images for QEMU RISC-V CI testing for azure, gitlab and travis-ci. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-20 11:52:23 +08:00
wget -O - https://github.com/riscv/opensbi/releases/download/v0.8/opensbi-0.8-rv-bin.tar.xz | tar -C /tmp -xJ;
export OPENSBI=/tmp/opensbi-0.8-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin;
azure/gitlab/travis: Add RISC-V SPL testing This adds QEMU RISC-V 32/64 SPL testing. Unlike QEMU RISC-V 32/64, we test SPL running in M-mode and U-Boot proper running in S-mode, with a 4-core SMP configuration. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-28 22:25:29 +08:00
fi
gitlab-ci: Switch to a Docker image that contains a QEMU we build Rather than buiding QEMU for each test.py build it once in our Dockerfile and re-use it as needed. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-25 01:09:31 +08:00
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
after_script:
gitlab: use our own GRUB Up to now we have been relying on openSUSE repositories for GRUB on arm and arm64 though we have included GRUB in our Docker image. Use the GRUB included in our Docker image. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-19 20:30:32 +08:00
- rm -rf /tmp/uboot-test-hooks /tmp/venv
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
script:
travis/gitlab/azure: Use -W to avoid warnings check We can use the -W flag to tell buildman to ignore warnings. Since we also have -E defined, compiler warnings are promoted to errors, so they will still cause a failure. But migration warnings of the form: ===================== WARNING ====================== This board does not use CONFIG_DM. CONFIG_DM will be compulsory starting with the v2020.01 release. Failure to update may result in board removal. See doc/driver-model/migration.rst for more info. will now be ignored. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 329f5ef51d2 (travis.yml: run buildman with option -E) Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:57 +08:00
# If we've been asked to use clang only do one configuration.
gitlab/azure: Use -w flag for all test.py builds Avoid needing to know about the internal .bm-work directory, by passing the -w flag to buildman. This is not needed on travis since the -w flag is already used (from a previous patch). Drop the -P flag since this has no effect if -w is used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:55 +08:00
- export UBOOT_TRAVIS_BUILD_DIR=/tmp/${TEST_PY_BD}
travis/gitlab/azure: Drop repeated buildman call with test.py It does not seem to be necessary to run buildman again to show errors, since any errors can be shown by the first invocation and there is only a single board being built. Update this to simplify the code, using the -e flag to make sure errors are shown. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:43:00 +08:00
- tools/buildman/buildman -o ${UBOOT_TRAVIS_BUILD_DIR} -w -E -W -e
--board ${TEST_PY_BD} ${OVERRIDE}
.gitlab-ci.yml: copy GRUB to correct build path The GRUB binaries are expected in $UBOOT_TRAVIS_BUILD_DIR. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-14 06:23:58 +08:00
- cp ~/grub_x86.efi $UBOOT_TRAVIS_BUILD_DIR/
- cp ~/grub_x64.efi $UBOOT_TRAVIS_BUILD_DIR/
- cp /opt/grub/grubriscv64.efi $UBOOT_TRAVIS_BUILD_DIR/grub_riscv64.efi
- cp /opt/grub/grubriscv32.efi $UBOOT_TRAVIS_BUILD_DIR/grub_riscv32.efi
- cp /opt/grub/grubaa64.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm64.efi
- cp /opt/grub/grubarm.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm.efi
gitlab/travis: Rework how and when we use virtualenv in order to use python3 As things stand today, we have tools that CI requires where "python" must be "python2". We need to use a virtualenv and pip in order to ensure that our pytest tests can be run. Rework things slightly so that: - On Travis-CI, we install python-pyelftools for the platforms that require pyelftools to be installed. - On GitLab-CI, we move to a newer base image that includes python3-pip and continue to use a virtualenv per job that needs it, for the correct set of packages. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-24 23:59:27 +08:00
- virtualenv -p /usr/bin/python3 /tmp/venv
- . /tmp/venv/bin/activate
- pip install -r test/py/requirements.txt
travis/gitlab/azure: Use bash to avoid a_test_which_does_not_exist Bash allows for variables to expand only if non-empty: $ var=test $ echo ${var:+"$var"} test $ echo ${var:+"-k $var"} -k test $ var= $ echo ${var:+"-k $var"} Use this feature to avoid the workaround. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:56 +08:00
# "${var:+"-k $var"}" expands to "" if $var is empty, "-k $var" if not
gitlab/azure: Use -w flag for all test.py builds Avoid needing to know about the internal .bm-work directory, by passing the -w flag to buildman. This is not needed on travis since the -w flag is already used (from a previous patch). Drop the -P flag since this has no effect if -w is used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:55 +08:00
- export PATH=/opt/qemu/bin:/tmp/uboot-test-hooks/bin:${PATH};
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
export PYTHONPATH=/tmp/uboot-test-hooks/py/travis-ci;
CI: show skipped Python tests Call pytest3 with argument -ra to display the reason why Python tests are skipped. The -r flag displays a test summary info for each test. -ra eliminates this info for passed tests. Pros an cons were discussed in: https://lists.denx.de/pipermail/u-boot/2020-June/417090.html Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11 04:04:40 +08:00
./test/py/test.py -ra --bd ${TEST_PY_BD} ${TEST_PY_ID}
travis/gitlab/azure: Use bash to avoid a_test_which_does_not_exist Bash allows for variables to expand only if non-empty: $ var=test $ echo ${var:+"$var"} test $ echo ${var:+"-k $var"} -k test $ var= $ echo ${var:+"-k $var"} Use this feature to avoid the workaround. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:56 +08:00
${TEST_PY_TEST_SPEC:+"-k ${TEST_PY_TEST_SPEC}"}
travis/gitlab/azure: Simplify the exit code for test.py It seems unnecessary to read the exit code and then check it again. Drop this and just let the test.py provide the exit code directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:59 +08:00
--build-dir "$UBOOT_TRAVIS_BUILD_DIR"
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
gitlab-ci: fix typo 'plaforms' %s/plaforms/platforms/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-06 18:26:16 +08:00
build all 32bit ARM platforms:
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
tags: [ 'all' ]
stage: world build
script:
- ret=0;
travis/gitlab/azure: Use -W to avoid warnings check We can use the -W flag to tell buildman to ignore warnings. Since we also have -E defined, compiler warnings are promoted to errors, so they will still cause a failure. But migration warnings of the form: ===================== WARNING ====================== This board does not use CONFIG_DM. CONFIG_DM will be compulsory starting with the v2020.01 release. Failure to update may result in board removal. See doc/driver-model/migration.rst for more info. will now be ignored. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 329f5ef51d2 (travis.yml: run buildman with option -E) Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:57 +08:00
./tools/buildman/buildman -o /tmp -P -E -W arm -x aarch64 || ret=$?;
if [[ $ret -ne 0 ]]; then
travis/gitlab/azure: Drop the buildman -d flag This has no effect since -S is not given also. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:53 +08:00
./tools/buildman/buildman -o /tmp -seP;
gitlab-ci: Fix indentation in some stanzas In a number of our stanzas we had multi-line commands that were one space short of alignment, correct this. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-24 23:59:16 +08:00
exit $ret;
fi;
gitlab-ci: Split the world build into 4 jobs To better allow for parallelization of the world build job split things into 32bit ARM (687 boards), 64bit ARM (215), PowerPC (311 boards) and everything else (167 boards). While the 32bit ARM job is heavier than I would like, there is not a natural split that would reduce it in half or so without requiring the sort of hard to maintain splits we have to do in Travis CI. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-18 05:51:28 +08:00
gitlab-ci: fix typo 'plaforms' %s/plaforms/platforms/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-06 18:26:16 +08:00
build all 64bit ARM platforms:
gitlab-ci: Split the world build into 4 jobs To better allow for parallelization of the world build job split things into 32bit ARM (687 boards), 64bit ARM (215), PowerPC (311 boards) and everything else (167 boards). While the 32bit ARM job is heavier than I would like, there is not a natural split that would reduce it in half or so without requiring the sort of hard to maintain splits we have to do in Travis CI. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-18 05:51:28 +08:00
tags: [ 'all' ]
stage: world build
script:
travis/gitlab/azure: Ensure we use python3 always When running our tests there are some cases where as part of the Python 2.7 to Python 3.6 migration we didn't force Python 3.6 to be used as everything wasn't yet migrated. Now that everything is, make sure to tell virtualenv to use python3. In the case of Travis this is best done by making the tools test happen after the main tests so that it will already have been run in all cases, TEST_PY_TOOLS is a subset of TEST_PY_BD. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-12 01:41:14 +08:00
- virtualenv -p /usr/bin/python3 /tmp/venv
gitlab-ci: Move the pyelfutils section We need this for building some 64bit ARM platforms, not for test.py runs. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-18 19:28:36 +08:00
- . /tmp/venv/bin/activate
- pip install pyelftools
gitlab-ci: Split the world build into 4 jobs To better allow for parallelization of the world build job split things into 32bit ARM (687 boards), 64bit ARM (215), PowerPC (311 boards) and everything else (167 boards). While the 32bit ARM job is heavier than I would like, there is not a natural split that would reduce it in half or so without requiring the sort of hard to maintain splits we have to do in Travis CI. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-18 05:51:28 +08:00
- ret=0;
travis/gitlab/azure: Use -W to avoid warnings check We can use the -W flag to tell buildman to ignore warnings. Since we also have -E defined, compiler warnings are promoted to errors, so they will still cause a failure. But migration warnings of the form: ===================== WARNING ====================== This board does not use CONFIG_DM. CONFIG_DM will be compulsory starting with the v2020.01 release. Failure to update may result in board removal. See doc/driver-model/migration.rst for more info. will now be ignored. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 329f5ef51d2 (travis.yml: run buildman with option -E) Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:57 +08:00
./tools/buildman/buildman -o /tmp -P -E -W aarch64 || ret=$?;
if [[ $ret -ne 0 ]]; then
travis/gitlab/azure: Drop the buildman -d flag This has no effect since -S is not given also. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:53 +08:00
./tools/buildman/buildman -o /tmp -seP;
gitlab-ci: Fix indentation in some stanzas In a number of our stanzas we had multi-line commands that were one space short of alignment, correct this. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-24 23:59:16 +08:00
exit $ret;
fi;
gitlab-ci: Split the world build into 4 jobs To better allow for parallelization of the world build job split things into 32bit ARM (687 boards), 64bit ARM (215), PowerPC (311 boards) and everything else (167 boards). While the 32bit ARM job is heavier than I would like, there is not a natural split that would reduce it in half or so without requiring the sort of hard to maintain splits we have to do in Travis CI. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-18 05:51:28 +08:00
gitlab-ci: fix typo 'plaforms' %s/plaforms/platforms/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-06 18:26:16 +08:00
build all PowerPC platforms:
gitlab-ci: Split the world build into 4 jobs To better allow for parallelization of the world build job split things into 32bit ARM (687 boards), 64bit ARM (215), PowerPC (311 boards) and everything else (167 boards). While the 32bit ARM job is heavier than I would like, there is not a natural split that would reduce it in half or so without requiring the sort of hard to maintain splits we have to do in Travis CI. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-18 05:51:28 +08:00
tags: [ 'all' ]
stage: world build
script:
- ret=0;
travis/gitlab/azure: Use -W to avoid warnings check We can use the -W flag to tell buildman to ignore warnings. Since we also have -E defined, compiler warnings are promoted to errors, so they will still cause a failure. But migration warnings of the form: ===================== WARNING ====================== This board does not use CONFIG_DM. CONFIG_DM will be compulsory starting with the v2020.01 release. Failure to update may result in board removal. See doc/driver-model/migration.rst for more info. will now be ignored. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 329f5ef51d2 (travis.yml: run buildman with option -E) Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:57 +08:00
./tools/buildman/buildman -o /tmp -P -E -W powerpc || ret=$?;
if [[ $ret -ne 0 ]]; then
travis/gitlab/azure: Drop the buildman -d flag This has no effect since -S is not given also. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:53 +08:00
./tools/buildman/buildman -o /tmp -seP;
gitlab-ci: Fix indentation in some stanzas In a number of our stanzas we had multi-line commands that were one space short of alignment, correct this. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-24 23:59:16 +08:00
exit $ret;
fi;
gitlab-ci: Split the world build into 4 jobs To better allow for parallelization of the world build job split things into 32bit ARM (687 boards), 64bit ARM (215), PowerPC (311 boards) and everything else (167 boards). While the 32bit ARM job is heavier than I would like, there is not a natural split that would reduce it in half or so without requiring the sort of hard to maintain splits we have to do in Travis CI. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-18 05:51:28 +08:00
gitlab-ci: fix typo 'plaforms' %s/plaforms/platforms/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-06 18:26:16 +08:00
build all other platforms:
gitlab-ci: Split the world build into 4 jobs To better allow for parallelization of the world build job split things into 32bit ARM (687 boards), 64bit ARM (215), PowerPC (311 boards) and everything else (167 boards). While the 32bit ARM job is heavier than I would like, there is not a natural split that would reduce it in half or so without requiring the sort of hard to maintain splits we have to do in Travis CI. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-18 05:51:28 +08:00
tags: [ 'all' ]
stage: world build
script:
- ret=0;
travis/gitlab/azure: Use -W to avoid warnings check We can use the -W flag to tell buildman to ignore warnings. Since we also have -E defined, compiler warnings are promoted to errors, so they will still cause a failure. But migration warnings of the form: ===================== WARNING ====================== This board does not use CONFIG_DM. CONFIG_DM will be compulsory starting with the v2020.01 release. Failure to update may result in board removal. See doc/driver-model/migration.rst for more info. will now be ignored. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 329f5ef51d2 (travis.yml: run buildman with option -E) Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:57 +08:00
./tools/buildman/buildman -o /tmp -P -E -W -x arm,powerpc || ret=$?;
if [[ $ret -ne 0 ]]; then
travis/gitlab/azure: Drop the buildman -d flag This has no effect since -S is not given also. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:53 +08:00
./tools/buildman/buildman -o /tmp -seP;
gitlab-ci: Fix indentation in some stanzas In a number of our stanzas we had multi-line commands that were one space short of alignment, correct this. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-24 23:59:16 +08:00
exit $ret;
fi;
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
# QA jobs for code analytics
# static code analysis with cppcheck (we can add --enable=all later)
cppcheck:
tags: [ 'all' ]
stage: testsuites
script:
travis/gitlab/azure: Run cppcheck in parallel This takes ages to run single-threaded. Adjust it to use all available processors. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-06 04:35:43 +08:00
- cppcheck -j$(nproc) --force --quiet --inline-suppr .
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
# search for TODO within source tree
grep TODO/FIXME/HACK:
tags: [ 'all' ]
stage: testsuites
script:
- grep -r TODO .
- grep -r FIXME .
# search for HACK within source tree and ignore HACKKIT board
- grep -r HACK . | grep -v HACKKIT
gitlab: build HTML documentation Several patches delivered incorrect restructured text as documentation. We should be able to discover this in Gitlab CI. Provide a build step for 'make htmldocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-22 01:24:01 +08:00
# build HTML documentation
htmldocs:
tags: [ 'all' ]
stage: testsuites
script:
.gitlab-ci: install doc/sphinx/requirements.txt Install all requirements according to doc/sphinx/requirements.txt in the virtual environment used for testing 'make htmldocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-26 05:06:25 +08:00
- virtualenv -p /usr/bin/python3 /tmp/venvhtml
- . /tmp/venvhtml/bin/activate
- pip install -r doc/sphinx/requirements.txt
gitlab: build HTML documentation Several patches delivered incorrect restructured text as documentation. We should be able to discover this in Gitlab CI. Provide a build step for 'make htmldocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-22 01:24:01 +08:00
- make htmldocs
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
# some statistics about the code base
sloccount:
tags: [ 'all' ]
stage: testsuites
script:
- sloccount .
# ensure all configs have MAINTAINERS entries
Check for configs without MAINTAINERS entry:
tags: [ 'all' ]
stage: testsuites
script:
- if [ `./tools/genboardscfg.py -f 2>&1 | wc -l` -ne 0 ]; then exit 1; fi
# Ensure host tools build
Build tools-only:
tags: [ 'all' ]
stage: testsuites
script:
- make tools-only_config tools-only -j$(nproc)
ci: add envtools support This commit add envtools suppport to CI to verify if there is no build issues. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-08-26 19:06:18 +08:00
# Ensure env tools build
Build envtools:
tags: [ 'all' ]
stage: testsuites
script:
- make tools-only_config envtools -j$(nproc)
Azure / GitLab / Travis: Add Kconfig unit tests to a job The Kconfig language provides a unit test that can be run. As these require pytest to be installed and run very quickly, bundle them in to an existing CI job. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-03-12 06:11:15 +08:00
Run binman, buildman, dtoc, Kconfig and patman testsuites:
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
tags: [ 'all' ]
stage: testsuites
script:
gitlab-ci: Consolidate some testsuite jobs We do not need to split binman, buildman, dtoc and patman test suite runs into 3 jobs. Instead, run them as a single job. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12 22:09:08 +08:00
- git config --global user.name "GitLab CI Runner";
git config --global user.email trini@konsulko.com;
export USER=gitlab;
travis/gitlab/azure: Ensure we use python3 always When running our tests there are some cases where as part of the Python 2.7 to Python 3.6 migration we didn't force Python 3.6 to be used as everything wasn't yet migrated. Now that everything is, make sure to tell virtualenv to use python3. In the case of Travis this is best done by making the tools test happen after the main tests so that it will already have been run in all cases, TEST_PY_TOOLS is a subset of TEST_PY_BD. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-12 01:41:14 +08:00
virtualenv -p /usr/bin/python3 /tmp/venv;
gitlab-ci: Consolidate some testsuite jobs We do not need to split binman, buildman, dtoc and patman test suite runs into 3 jobs. Instead, run them as a single job. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12 22:09:08 +08:00
. /tmp/venv/bin/activate;
azure/gitLab/travis: Add pygit2 as a dependency for tests This lets patman run all of its tests, rather than skipping quite a few. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-30 11:46:11 +08:00
pip install pyelftools pytest pygit2;
gitlab/azure: Use the -w option for sandbox_spl Avoid needing to know about the internal .bm-work directory, by passing the -w flag to buildman. This does not affect travis since the previous commit already used the -w flag. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:50 +08:00
export UBOOT_TRAVIS_BUILD_DIR=/tmp/sandbox_spl;
gitlab-ci: Consolidate some testsuite jobs We do not need to split binman, buildman, dtoc and patman test suite runs into 3 jobs. Instead, run them as a single job. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12 22:09:08 +08:00
export PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt";
export PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}";
gitlab/azure: Use the -w option for sandbox_spl Avoid needing to know about the internal .bm-work directory, by passing the -w flag to buildman. This does not affect travis since the previous commit already used the -w flag. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-18 23:42:50 +08:00
./tools/buildman/buildman -o ${UBOOT_TRAVIS_BUILD_DIR} -w sandbox_spl;
gitlab-ci: Consolidate some testsuite jobs We do not need to split binman, buildman, dtoc and patman test suite runs into 3 jobs. Instead, run them as a single job. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12 22:09:08 +08:00
./tools/binman/binman --toolpath ${UBOOT_TRAVIS_BUILD_DIR}/tools test;
./tools/buildman/buildman -t;
./tools/dtoc/dtoc -t;
patman: Add a 'test' subcommand At present we use --test to indicate that tests should be run. It is better to use a subcommand for list, like binman. Change it and adjust the existing code to fit under a 'send' subcommand, the default. Give this subcommand the same default arguments as the others. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-06 11:41:55 +08:00
./tools/patman/patman test;
Azure / GitLab / Travis: Add Kconfig unit tests to a job The Kconfig language provides a unit test that can be run. As these require pytest to be installed and run very quickly, bundle them in to an existing CI job. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-03-12 06:11:15 +08:00
make testconfig
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
Nokia RX-51: Add automated test for running RX-51 build in qemu This patch contains test/nokia_rx51_test.sh script which automatically download and compile all needed tools in local temporary directory to generate a simple MTD images for booting Maemo kernel image by U-Boot from RAM, eMMC and OneNAND. MTD images are then run in virtual n900 machine provided by qemu-linaro project. This script does not need any special privileges, so it can be run as non-root nobody user. It can be used to check that U-Boot for Nokia N900 is not broken and can be successfully booted in emulator. Script is registered to .azure-pipelines.yml, .gitlab-ci.yml and .travis.yml so it would be automatically run on those CI services. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-17 20:38:22 +08:00
Run tests for Nokia RX-51 (aka N900):
tags: [ 'all' ]
stage: testsuites
script:
- ./tools/buildman/buildman --fetch-arch arm;
export PATH=~/.buildman-toolchains/gcc-9.2.0-nolibc/arm-linux-gnueabi/bin/:$PATH;
test/nokia_rx51_test.sh
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
# Test sandbox with test.py
sandbox test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "sandbox"
<<: *buildman_and_testpy_dfn
gitlab/azure: Enable LLVM tests Now that we have again fixed the problems that building with clang exposes, enable these tests on Azure and GitLab-CI as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-07 08:30:47 +08:00
sandbox with clang test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "sandbox"
Azure/GitLab: Switch over to using LLVM-10 At this point LLVM-7 is rather old. Switch over to LLVM-10 to enable some amount of CI coverage with newer compilers. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-11 06:28:04 +08:00
OVERRIDE: "-O clang-10"
gitlab/azure: Enable LLVM tests Now that we have again fixed the problems that building with clang exposes, enable these tests on Azure and GitLab-CI as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-07 08:30:47 +08:00
<<: *buildman_and_testpy_dfn
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
sandbox_spl test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "sandbox_spl"
Azure/GitLab/Travis: Add SPL unit tests Run SPL unit tests in all test environments. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-26 10:38:36 +08:00
TEST_PY_TEST_SPEC: "test_ofplatdata or test_handoff or test_spl"
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
<<: *buildman_and_testpy_dfn
gitlab-ci: Add evb-ast2500 test.py test Bring us back into line with current Travis tests. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-18 04:06:57 +08:00
evb-ast2500 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "evb-ast2500"
TEST_PY_ID: "--id qemu"
<<: *buildman_and_testpy_dfn
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
sandbox_flattree test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "sandbox_flattree"
<<: *buildman_and_testpy_dfn
vexpress_ca15_tc2 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "vexpress_ca15_tc2"
TEST_PY_ID: "--id qemu"
<<: *buildman_and_testpy_dfn
vexpress_ca9x4 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "vexpress_ca9x4"
TEST_PY_ID: "--id qemu"
<<: *buildman_and_testpy_dfn
integratorcp_cm926ejs test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "integratorcp_cm926ejs"
TEST_PY_TEST_SPEC: "not sleep"
TEST_PY_ID: "--id qemu"
<<: *buildman_and_testpy_dfn
qemu_arm test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu_arm"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
qemu_arm64 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu_arm64"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
qemu_mips test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu_mips"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
qemu_mipsel test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu_mipsel"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
qemu_mips64 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu_mips64"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
qemu_mips64el test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu_mips64el"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
.gitlab-ci.yml: add Qemu tests for MIPS Malta board Add Qemu tests for the MIPS Malta machine as a replacement for the deprecated generic MIPS machine. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-06-07 04:21:47 +08:00
qemu_malta test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "malta"
TEST_PY_TEST_SPEC: "not sleep and not efi"
TEST_PY_ID: "--id qemu"
<<: *buildman_and_testpy_dfn
qemu_maltael test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "maltael"
TEST_PY_TEST_SPEC: "not sleep and not efi"
TEST_PY_ID: "--id qemu"
<<: *buildman_and_testpy_dfn
qemu_malta64 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "malta64"
TEST_PY_TEST_SPEC: "not sleep and not efi"
TEST_PY_ID: "--id qemu"
<<: *buildman_and_testpy_dfn
qemu_malta64el test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "malta64el"
TEST_PY_TEST_SPEC: "not sleep and not efi"
TEST_PY_ID: "--id qemu"
<<: *buildman_and_testpy_dfn
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
qemu-ppce500 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu-ppce500"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
azure/gitlab/travis: Add qemu-riscv32 testing This adds the qemu-riscv32_defconfig test configuration. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-28 22:25:27 +08:00
qemu-riscv32 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu-riscv32"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
gitlab-ci: Add qemu-riscv64 testing Mirror the qemu-riscv64 testing we do on Travis. Update to a newer Docker image that contains riscv64-softmmu for QEMU. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-02 23:32:37 +08:00
qemu-riscv64 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu-riscv64"
TEST_PY_TEST_SPEC: "not sleep"
azure/gitlab/travis: Add RISC-V SPL testing This adds QEMU RISC-V 32/64 SPL testing. Unlike QEMU RISC-V 32/64, we test SPL running in M-mode and U-Boot proper running in S-mode, with a 4-core SMP configuration. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-28 22:25:29 +08:00
<<: *buildman_and_testpy_dfn
qemu-riscv32_spl test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu-riscv32_spl"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
qemu-riscv64_spl test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu-riscv64_spl"
TEST_PY_TEST_SPEC: "not sleep"
gitlab-ci: Add qemu-riscv64 testing Mirror the qemu-riscv64 testing we do on Travis. Update to a newer Docker image that contains riscv64-softmmu for QEMU. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-02 23:32:37 +08:00
<<: *buildman_and_testpy_dfn
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
qemu-x86 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu-x86"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
qemu-x86_64 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "qemu-x86_64"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
Azure/GitLab/Travis: Add SH4 r2dplus machine with various PCI ethernet options Add SH4 R2Dplus machine configured to test various U-Boot PCI ethernet options -- RTL8139, EEPRO100, AMD PCnet, DEC Tulip. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-15 03:55:58 +08:00
r2dplus_i82557c test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "r2dplus"
TEST_PY_ID: "--id i82557c_qemu"
<<: *buildman_and_testpy_dfn
r2dplus_pcnet test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "r2dplus"
TEST_PY_ID: "--id pcnet_qemu"
<<: *buildman_and_testpy_dfn
r2dplus_rtl8139 test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "r2dplus"
TEST_PY_ID: "--id rtl8139_qemu"
<<: *buildman_and_testpy_dfn
r2dplus_tulip test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "r2dplus"
TEST_PY_ID: "--id tulip_qemu"
<<: *buildman_and_testpy_dfn
ARM: zynq: Switch to single zynq configurations There are a lot of zynq configurations which can be merged together and use only one for all. The similar change has been done for ZynqMP by commit be1b6c32d940 ("arm64: zynqmp: Use zynqmp_virt platform") Build SPL with u-boot.img for zc706 like this. export DEVICE_TREE=zynq-zc706 && make xilinx_zynq_virt_defconfig && make -j8 u-boot.img is generic for all boards. Tested on Zybo, zc702, zc706, zc770-xm011-x16, cc108 and microzed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-13 22:03:29 +08:00
xilinx_zynq_virt test.py:
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
tags: [ 'all' ]
variables:
ARM: zynq: Switch to single zynq configurations There are a lot of zynq configurations which can be merged together and use only one for all. The similar change has been done for ZynqMP by commit be1b6c32d940 ("arm64: zynqmp: Use zynqmp_virt platform") Build SPL with u-boot.img for zc706 like this. export DEVICE_TREE=zynq-zc706 && make xilinx_zynq_virt_defconfig && make -j8 u-boot.img is generic for all boards. Tested on Zybo, zc702, zc706, zc770-xm011-x16, cc108 and microzed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-13 22:03:29 +08:00
TEST_PY_BD: "xilinx_zynq_virt"
gitlab-ci: Initial conversion of Travis CI build to GitLab CI Migrate all of the logic in our current .travis.yml file to a GitLab CI config file. Notable changes are that this will run the jobs on runners with the "all" tag. The timeout for a job needs to be configured higher than normal as we no longer split building the world up into a large number of small jobs but instead perform one big build job. We make use of stages so that we build and run all of the QEMU + test.py tests first in order to increase the chance that any problems will be found before starting the final big build. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-19 21:25:17 +08:00
TEST_PY_TEST_SPEC: "not sleep"
TEST_PY_ID: "--id qemu"
<<: *buildman_and_testpy_dfn
xilinx_versal_virt test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "xilinx_versal_virt"
TEST_PY_TEST_SPEC: "not sleep"
TEST_PY_ID: "--id qemu"
<<: *buildman_and_testpy_dfn
xtfpga test.py:
tags: [ 'all' ]
variables:
TEST_PY_BD: "xtfpga"
TEST_PY_TEST_SPEC: "not sleep"
TEST_PY_ID: "--id qemu"
<<: *buildman_and_testpy_dfn
Reference in New Issue Copy Permalink