u-boot/configs/icnova-a20-swac_defconfig

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_SUPPORT_PASSING_ATAGS=y
CONFIG_CMDLINE_TAG=y
CONFIG_INITRD_TAG=y
CONFIG_SERIAL_TAG=y
CONFIG_STATIC_MACH_TYPE=y
CONFIG_MACH_TYPE=4283
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-swac"
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
CONFIG_OLD_SUNXI_KERNEL_COMPAT=y
CONFIG_MMC0_CD_PIN="PI5"
CONFIG_USB0_VBUS_PIN="PG11"
CONFIG_USB0_VBUS_DET="PH7"
CONFIG_USB1_VBUS_PIN="PG10"
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="PH22"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
CONFIG_CMD_UNZIP=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
sunxi: Add defconfig for icnova-a20-swac The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from In-Circuit: http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM http://linux-sunxi.org/In-Circuit_ICnova_A20 This patch adds support for this board, including ethernet, LCD and USB support. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-03-21 16:09:11 +08:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_SUNXI=y`
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-30 21:16:30 +08:00			`CONFIG_SUPPORT_PASSING_ATAGS=y`
			`CONFIG_CMDLINE_TAG=y`
			`CONFIG_INITRD_TAG=y`
			`CONFIG_SERIAL_TAG=y`
arm: Add Kconfig entry for MACH_TYPE As part of migrating support for ATAGs to Kconfig, add an option for setting and passing MACH_TYPE. Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-30 21:16:31 +08:00			`CONFIG_STATIC_MACH_TYPE=y`
			`CONFIG_MACH_TYPE=4283`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2021-06-28 22:17:29 +08:00			`CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-swac"`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2018-04-08 08:27:54 +08:00			`CONFIG_SPL=y`
sunxi: Add defconfig for icnova-a20-swac The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from In-Circuit: http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM http://linux-sunxi.org/In-Circuit_ICnova_A20 This patch adds support for this board, including ethernet, LCD and USB support. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-03-21 16:09:11 +08:00			`CONFIG_MACH_SUN7I=y`
			`CONFIG_DRAM_CLK=384`
			`CONFIG_OLD_SUNXI_KERNEL_COMPAT=y`
			`CONFIG_MMC0_CD_PIN="PI5"`
			`CONFIG_USB0_VBUS_PIN="PG11"`
			`CONFIG_USB0_VBUS_DET="PH7"`
			`CONFIG_USB1_VBUS_PIN="PG10"`
			`CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"`
			`CONFIG_VIDEO_LCD_POWER="PH22"`
			`CONFIG_VIDEO_LCD_PANEL_LVDS=y`
			`# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set`
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> 2021-07-11 11:14:36 +08:00			`CONFIG_SPL_I2C=y`
cmd: move CONFIG_CMD_UNZIP and CONFIG_CMD_ZIP to Kconfig CONFIG_CMD_ZIP is not defined by any board. I am moving CONFIG_CMD_UNZIP to defconfig files except UniPhier SoC family. I am the maintainer of UniPhier platform, so I know "select CMD_UNZIP" is better for this platform. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Ryan Harkin <ryan.harkin@linaro.org> Tested-by: Ryan Harkin <ryan.harkin@linaro.org> 2017-02-05 09:42:56 +08:00			`CONFIG_CMD_UNZIP=y`
Convert CONFIG_SYS_I2C_MVTWSI to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MVTWSI Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-18 05:59:47 +08:00			`CONFIG_SYS_I2C_MVTWSI=y`
Convert CONFIG_SYS_I2C_SPEED et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-19 11:12:32 +08:00			`CONFIG_SYS_I2C_SLAVE=0x7f`
			`CONFIG_SYS_I2C_SPEED=400000`
Convert CONFIG_PHYLIB et al to Kconfig This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com> 2020-04-25 03:35:53 +08:00			`CONFIG_PHY_REALTEK=y`
sunxi: Add defconfig for icnova-a20-swac The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from In-Circuit: http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM http://linux-sunxi.org/In-Circuit_ICnova_A20 This patch adds support for this board, including ethernet, LCD and USB support. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-03-21 16:09:11 +08:00			`CONFIG_ETH_DESIGNWARE=y`
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 2018-07-21 12:03:57 +08:00			`CONFIG_MII=y`
sunxi: Move SUNXI_GMAC to Kconfig Move the SUNXI_GMAC config option to Kconfig, remove it from SYS_EXTRA_OPTIONS and rename it into SUN7I_GMAC. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 2017-04-02 18:59:03 +08:00			`CONFIG_SUN7I_GMAC=y`
sunxi: Add defconfig for icnova-a20-swac The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from In-Circuit: http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM http://linux-sunxi.org/In-Circuit_ICnova_A20 This patch adds support for this board, including ethernet, LCD and USB support. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-03-21 16:09:11 +08:00			`CONFIG_USB_EHCI_HCD=y`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2019-02-08 03:53:03 +08:00			`CONFIG_USB_OHCI_HCD=y`