rockchip: rk3399: Add support for chromebook_kevin
Add support for Kevin, an RK3399-based convertible chromebook that is
very similar to Bob. This patch is mostly based on existing support for
Bob, with only minor changes for Kevin-specific things.
Unlike other Gru boards, coreboot sets Kevin's center logic to 925 mV,
so adjust it here in the dts as well. The rk3399-gru-kevin devicetree
has an unknown event code reference which has to be defined, set it
to the Linux counterpart. The new defconfig is copied from Bob with the
diffconfig:
DEFAULT_DEVICE_TREE "rk3399-gru-bob" -> "rk3399-gru-kevin"
DEFAULT_FDT_FILE "rockchip/rk3399-gru-bob.dtb" -> "rockchip/rk3399-gru-kevin.dtb"
VIDEO_ROCKCHIP_MAX_XRES 1280 -> 2400
VIDEO_ROCKCHIP_MAX_YRES 800 -> 1600
+TARGET_CHROMEBOOK_KEVIN y
With this Kevin can boot from SPI flash to a usable U-Boot prompt on the
display with the keyboard working, but cannot boot into Linux for
unknown reasons.
eMMC starts in a working state but fails to re-init, microSD card works
but at a lower-than-expected speed, USB works but causes a hang on
de-init. There are known workarounds to solve eMMC and USB issues.
Cc: Marty E. Plummer <hanetzer@startmail.com>
Cc: Simon Glass <sjg@chromium.org>
[Alper: commit message, resync config with Bob, update MAINTAINERS,
add to Rockchip doc, add Kconfig help message, set regulator]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2021-12-24 21:43:46 +08:00
|
|
|
CONFIG_ARM=y
|
|
|
|
CONFIG_SKIP_LOWLEVEL_INIT=y
|
|
|
|
CONFIG_ARCH_ROCKCHIP=y
|
|
|
|
CONFIG_SYS_TEXT_BASE=0x00200000
|
|
|
|
CONFIG_SPL_GPIO=y
|
|
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
|
|
CONFIG_ENV_OFFSET=0x3F8000
|
|
|
|
CONFIG_DEFAULT_DEVICE_TREE="rk3399-gru-kevin"
|
|
|
|
CONFIG_SPL_TEXT_BASE=0xff8c2000
|
|
|
|
CONFIG_ROCKCHIP_RK3399=y
|
|
|
|
CONFIG_ROCKCHIP_BOOT_MODE_REG=0
|
|
|
|
CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
|
|
|
|
# CONFIG_SPL_MMC is not set
|
|
|
|
CONFIG_TARGET_CHROMEBOOK_KEVIN=y
|
|
|
|
CONFIG_DEBUG_UART_BASE=0xff1a0000
|
|
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
|
|
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
|
|
|
CONFIG_SPL_SPI=y
|
|
|
|
CONFIG_DEBUG_UART=y
|
|
|
|
CONFIG_SYS_LOAD_ADDR=0x800800
|
|
|
|
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-kevin.dtb"
|
|
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
|
|
CONFIG_BOARD_EARLY_INIT_R=y
|
|
|
|
CONFIG_MISC_INIT_R=y
|
|
|
|
CONFIG_BLOBLIST=y
|
|
|
|
CONFIG_BLOBLIST_ADDR=0x100000
|
2022-03-28 22:01:11 +08:00
|
|
|
CONFIG_BLOBLIST_SIZE=0x1000
|
rockchip: rk3399: Add support for chromebook_kevin
Add support for Kevin, an RK3399-based convertible chromebook that is
very similar to Bob. This patch is mostly based on existing support for
Bob, with only minor changes for Kevin-specific things.
Unlike other Gru boards, coreboot sets Kevin's center logic to 925 mV,
so adjust it here in the dts as well. The rk3399-gru-kevin devicetree
has an unknown event code reference which has to be defined, set it
to the Linux counterpart. The new defconfig is copied from Bob with the
diffconfig:
DEFAULT_DEVICE_TREE "rk3399-gru-bob" -> "rk3399-gru-kevin"
DEFAULT_FDT_FILE "rockchip/rk3399-gru-bob.dtb" -> "rockchip/rk3399-gru-kevin.dtb"
VIDEO_ROCKCHIP_MAX_XRES 1280 -> 2400
VIDEO_ROCKCHIP_MAX_YRES 800 -> 1600
+TARGET_CHROMEBOOK_KEVIN y
With this Kevin can boot from SPI flash to a usable U-Boot prompt on the
display with the keyboard working, but cannot boot into Linux for
unknown reasons.
eMMC starts in a working state but fails to re-init, microSD card works
but at a lower-than-expected speed, USB works but causes a hang on
de-init. There are known workarounds to solve eMMC and USB issues.
Cc: Marty E. Plummer <hanetzer@startmail.com>
Cc: Simon Glass <sjg@chromium.org>
[Alper: commit message, resync config with Bob, update MAINTAINERS,
add to Rockchip doc, add Kconfig help message, set regulator]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2021-12-24 21:43:46 +08:00
|
|
|
CONFIG_HANDOFF=y
|
|
|
|
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
|
|
|
CONFIG_SPL_STACK_R=y
|
|
|
|
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
|
|
|
|
CONFIG_SPL_SPI_LOAD=y
|
|
|
|
CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
|
|
|
|
CONFIG_CMD_BOOTZ=y
|
|
|
|
CONFIG_CMD_GPIO=y
|
|
|
|
CONFIG_CMD_GPT=y
|
|
|
|
CONFIG_CMD_I2C=y
|
|
|
|
CONFIG_CMD_MMC=y
|
|
|
|
CONFIG_CMD_SF_TEST=y
|
|
|
|
CONFIG_CMD_SPI=y
|
|
|
|
CONFIG_CMD_USB=y
|
|
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
|
|
CONFIG_CMD_TIME=y
|
|
|
|
CONFIG_CMD_PMIC=y
|
|
|
|
CONFIG_CMD_REGULATOR=y
|
|
|
|
CONFIG_CMD_LOG=y
|
|
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
|
|
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
|
|
|
CONFIG_ENV_IS_IN_MMC=y
|
|
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
|
|
CONFIG_SPL_DM_SEQ_ALIAS=y
|
|
|
|
CONFIG_ROCKCHIP_GPIO=y
|
|
|
|
CONFIG_I2C_CROS_EC_TUNNEL=y
|
|
|
|
CONFIG_SYS_I2C_ROCKCHIP=y
|
|
|
|
CONFIG_I2C_MUX=y
|
|
|
|
CONFIG_CROS_EC_KEYB=y
|
|
|
|
CONFIG_MISC=y
|
|
|
|
CONFIG_ROCKCHIP_EFUSE=y
|
|
|
|
CONFIG_CROS_EC=y
|
|
|
|
CONFIG_CROS_EC_SPI=y
|
|
|
|
CONFIG_PWRSEQ=y
|
|
|
|
CONFIG_MMC_PWRSEQ=y
|
|
|
|
CONFIG_MMC_DW=y
|
|
|
|
CONFIG_MMC_DW_ROCKCHIP=y
|
|
|
|
CONFIG_MMC_SDHCI=y
|
|
|
|
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
|
|
|
CONFIG_SF_DEFAULT_BUS=1
|
|
|
|
CONFIG_SF_DEFAULT_SPEED=20000000
|
|
|
|
CONFIG_SPI_FLASH_GIGADEVICE=y
|
|
|
|
CONFIG_SPI_FLASH_WINBOND=y
|
|
|
|
CONFIG_DM_ETH=y
|
|
|
|
CONFIG_ETH_DESIGNWARE=y
|
|
|
|
CONFIG_GMAC_ROCKCHIP=y
|
|
|
|
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
|
|
|
CONFIG_PHY_ROCKCHIP_TYPEC=y
|
|
|
|
CONFIG_PMIC_RK8XX=y
|
|
|
|
CONFIG_REGULATOR_PWM=y
|
|
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
|
|
CONFIG_REGULATOR_RK8XX=y
|
|
|
|
CONFIG_PWM_CROS_EC=y
|
|
|
|
CONFIG_PWM_ROCKCHIP=y
|
|
|
|
CONFIG_DM_RESET=y
|
|
|
|
CONFIG_DM_RNG=y
|
|
|
|
CONFIG_RNG_ROCKCHIP=y
|
|
|
|
CONFIG_DEBUG_UART_SHIFT=2
|
|
|
|
CONFIG_ROCKCHIP_SPI=y
|
|
|
|
CONFIG_SYSRESET=y
|
|
|
|
CONFIG_USB=y
|
|
|
|
CONFIG_USB_XHCI_HCD=y
|
|
|
|
CONFIG_USB_XHCI_DWC3=y
|
|
|
|
CONFIG_USB_EHCI_HCD=y
|
|
|
|
CONFIG_USB_EHCI_GENERIC=y
|
|
|
|
CONFIG_USB_OHCI_HCD=y
|
|
|
|
CONFIG_USB_OHCI_GENERIC=y
|
|
|
|
CONFIG_USB_DWC3=y
|
|
|
|
CONFIG_USB_KEYBOARD=y
|
|
|
|
CONFIG_USB_HOST_ETHER=y
|
|
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
|
|
CONFIG_USB_ETHER_ASIX88179=y
|
|
|
|
CONFIG_USB_ETHER_MCS7830=y
|
|
|
|
CONFIG_USB_ETHER_RTL8152=y
|
|
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|
|
|
|
CONFIG_DM_VIDEO=y
|
|
|
|
CONFIG_DISPLAY=y
|
|
|
|
CONFIG_VIDEO_ROCKCHIP=y
|
|
|
|
CONFIG_VIDEO_ROCKCHIP_MAX_XRES=2400
|
|
|
|
CONFIG_VIDEO_ROCKCHIP_MAX_YRES=1600
|
|
|
|
CONFIG_DISPLAY_ROCKCHIP_EDP=y
|
|
|
|
CONFIG_CMD_DHRYSTONE=y
|
|
|
|
CONFIG_ERRNO_STR=y
|