mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-30 08:03:32 +08:00
Code Issues Packages Projects Releases Wiki Activity
5f4cc27473
u-boot/configs/sandbox_spl_defconfig

246 lines
5.3 KiB
Plaintext
Raw Normal View History

spl: test: Add a test for spl_load_simple_fit() As an example of an SPL test, add a new test for loading a FIT within SPL. This runs on sandbox_spl. For this to work, the text base is adjusted so that there is plenty of space available. While we are here, document struct spl_load_info properly, since this is currently ambiguous. This test only verifies the logic path. It does not actually check that the image is loaded correctly. It is not possible for sandbox's SPL to actually run u-boot.img since it currently includes u-boot.bin rather than u-boot. Further work could expand the test in that direction. The need for this was noted at: http://patchwork.ozlabs.org/project/uboot/patch/20201216000944.2832585-3-mr.nuke.me@gmail.com/ Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-08 08:35:15 +08:00
CONFIG_SYS_TEXT_BASE=0x200000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 20:19:22 +08:00
CONFIG_SYS_MALLOC_LEN=0x2000000
dm: gpio: Add of-platdata support Add support for accessing GPIOs using of-plata. This uses the same mechanism as for clocks, but allows use of the xlate() method so that the driver can interpret the parameters. Update the condition for GPIO_HOG so that it is not built into SPL, since it needs SPL_OF_REAL which is not enabled in sandbox_spl. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-07 21:24:12 +08:00
CONFIG_SPL_GPIO=y
Convert CONFIG_SPL_LIBCOMMON_SUPPORT to Kconfig Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:18:41 +08:00
CONFIG_SPL_LIBCOMMON_SUPPORT=y
Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:18:43 +08:00
CONFIG_SPL_LIBGENERIC_SUPPORT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-11 03:31:07 +08:00
CONFIG_NR_DRAM_BANKS=1
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-01 01:50:32 +08:00
CONFIG_SYS_MEMTEST_START=0x00100000
CONFIG_SYS_MEMTEST_END=0x00101000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-23 02:38:00 +08:00
CONFIG_ENV_SIZE=0x2000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 22:17:29 +08:00
CONFIG_DEFAULT_DEVICE_TREE="sandbox"
serial: Rename SERIAL_SUPPORT to SERIAL Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-09 02:20:12 +08:00
CONFIG_SPL_SERIAL=y
Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 11:14:31 +08:00
CONFIG_SPL_DRIVERS_MISC=y
sandbox_spl: Increase SPL malloc() size The test framework reinits driver model tests before running each test. Since malloc_simple does not support free(), this eventually runs out of memory. Fix it for now by increasing the space to 32KB. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-15 12:25:29 +08:00
CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-08 08:27:54 +08:00
CONFIG_SPL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-27 02:45:25 +08:00
CONFIG_BOOTSTAGE_STASH_ADDR=0x0
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_SANDBOX_SPL=y
configs: sandbox: activate DEBUG_UART Add CONFIG_DEBUG_UART=y for all sandbox defconfig as it is already done in sandbox_defconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-27 18:49:29 +08:00
CONFIG_DEBUG_UART=y
Enable DISTRO_DEFAULT on platforms that missed it before A number of platforms had been using the distro default feature before it was moved to Kconfig but did not enable the new Kconfig option when it was enabled. This caused a regression in terms of features and this introduces breakage when more things move to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-29 22:14:57 +08:00
CONFIG_DISTRO_DEFAULTS=y
Convert CONFIG_SYS_LOAD_ADDR to Kconfig Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-23 22:25:31 +08:00
CONFIG_SYS_LOAD_ADDR=0x0
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
config: Move CONFIG_BOARD_LATE_INIT to defconfigs Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-01-21 18:48:33 +08:00
CONFIG_FIT_VERBOSE=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_SPL_LOAD_FIT=y
Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty At present we use the empty string to indicate that there is no FIT generator, but this doesn't allow an individual board to undefine it. Create a separate bool instead. Update the config of the boards which currently have an empty string. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-20 03:56:10 +08:00
# CONFIG_USE_SPL_FIT_GENERATOR is not set
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_BOOTSTAGE_FDT=y
CONFIG_BOOTSTAGE_STASH=y
CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
CONFIG_CONSOLE_RECORD=y
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to Kconfig Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28 20:38:17 +08:00
CONFIG_DISPLAY_BOARDINFO_LATE=y
Convert CONFIG_MISC_INIT_F to Kconfig This converts the following to Kconfig: CONFIG_MISC_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-26 11:17:30 +08:00
CONFIG_MISC_INIT_F=y
spl: Add support for passing handoff info to U-Boot proper There is some basic informaton that SPL normally wants to pass through to U-Boot, such as the SDRAM size and bank information. Mkae use of the new bloblist structure for this. Add a new 'handoff' blob which is set up in SPL and passed to U-Boot proper. Also adda test for sandbox_spl that checks that this works correctly and a new 'sb' command to show the information passed from SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 09:44:09 +08:00
CONFIG_HANDOFF=y
Convert CONFIG_SPL_BOARD_INIT to Kconfig This converts the following to Kconfig: CONFIG_SPL_BOARD_INIT Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> [trini: Update the Kconfig logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-03 17:13:32 +08:00
CONFIG_SPL_BOARD_INIT=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-14 01:48:42 +08:00
CONFIG_SPL_ENV_SUPPORT=y
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 11:14:36 +08:00
CONFIG_SPL_I2C=y
rtc: Rename RTC_SUPPORT to RTC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-09 02:20:11 +08:00
CONFIG_SPL_RTC=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_CMD_CPU=y
CONFIG_CMD_LICENSE=y
CONFIG_CMD_BOOTZ=y
sandbox: enable CMD_BOOTEFI_HELLO and CMD_EFIDEBUG 'bootefi hello' is used in one of the Python tests. efidebug can be used to verify the correct initialization of the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromum.org>
2020-03-14 19:27:02 +08:00
CONFIG_CMD_BOOTEFI_HELLO=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
# CONFIG_CMD_ELF is not set
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
test: sandbox: add test for erase command Add test for the erase command tested on ENV in EXT4. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 17:51:27 +08:00
CONFIG_CMD_ERASEENV=y
Convert CONFIG_CMD_ENV_CALLBACK to Kconfig This converts the following to Kconfig: CONFIG_CMD_ENV_CALLBACK Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 17:25:13 +08:00
CONFIG_CMD_ENV_CALLBACK=y
Convert CONFIG_CMD_ENV_FLAGS to Kconfig This converts the following to Kconfig: CONFIG_CMD_ENV_FLAGS Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 17:25:14 +08:00
CONFIG_CMD_ENV_FLAGS=y
configs: sandbox: Enable sub command 'env info' Enable support for sub command 'env info' in sandbox with CONFIG_CMD_NVEDIT_INFO. This is aimed primarily at adding unit test. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-19 20:03:36 +08:00
CONFIG_CMD_NVEDIT_INFO=y
configs: sandbox: activate command env select and env load Add support of environment location with the new env command: 'env select' and 'env load' The ENV backend is selected by priority order - 0 = "nowhere" (default at boot) - 1 = "EXT4" To test EXT4 env support, this backend is selected by name: > env select EXT4 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 17:51:23 +08:00
CONFIG_CMD_NVEDIT_LOAD=y
CONFIG_CMD_NVEDIT_SELECT=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_LOOPW=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 07:58:53 +08:00
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MEMINFO=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_CMD_MX_CYCLIC=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-29 02:28:38 +08:00
CONFIG_CMD_MEMTEST=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_CMD_DEMO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 07:58:53 +08:00
CONFIG_CMD_GPIO=y
cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly update all of the config files we must also update CMD_PART and CMD_GPT to also be in Kconfig in order to avoid complex logic elsewhere to update all of the config files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-27 18:00:42 +08:00
CONFIG_CMD_GPT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 07:58:53 +08:00
CONFIG_CMD_IDE=y
CONFIG_CMD_I2C=y
video_osd: Add osd sandbox driver and tests Add sandbox driver and tests for the new OSD uclass. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-27 15:19:31 +08:00
CONFIG_CMD_OSD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 07:58:53 +08:00
CONFIG_CMD_PCI=y
CONFIG_CMD_REMOTEPROC=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
Convert CONFIG_BOOTP_DNS2 to Kconfig This converts the following to Kconfig: CONFIG_BOOTP_DNS2 CONFIG_BOOTP_PXE_CLIENTARCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-17 07:06:17 +08:00
CONFIG_BOOTP_DNS2=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TFTPSRV=y
CONFIG_CMD_RARP=y
CONFIG_CMD_CDP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DNS=y
CONFIG_CMD_LINK_LOCAL=y
Convert CONFIG_CMD_BMP to Kconfig This converts the following to Kconfig: CONFIG_CMD_BMP Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add depends on LCD || DM_VIDEO || VIDEO] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 12:27:55 +08:00
CONFIG_CMD_BMP=y
sandbox: enable CMD_BOOTEFI_HELLO and CMD_EFIDEBUG 'bootefi hello' is used in one of the Python tests. efidebug can be used to verify the correct initialization of the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromum.org>
2020-03-14 19:27:02 +08:00
CONFIG_CMD_EFIDEBUG=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_SOUND=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_TPM=y
CONFIG_CMD_TPM_TEST=y
fs: Convert CONFIG_CMD_CBFS to Kconfig This converts the following to Kconfig: CONFIG_CMD_CBFS Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_CBFS on SYS_COREBOOT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 12:27:58 +08:00
CONFIG_CMD_CBFS=y
fs: Convert CONFIG_CMD_CRAMFS to Kconfig This converts the following to Kconfig: CONFIG_CMD_CRAMFS Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_CRAMFS for keymile] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 12:28:03 +08:00
CONFIG_CMD_CRAMFS=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_CMD_EXT4_WRITE=y
disk: convert CONFIG_MAC_PARTITION to Kconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-27 18:00:36 +08:00
CONFIG_MAC_PARTITION=y
disk: convert CONFIG_AMIGA_PARTITION to Kconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-27 18:00:39 +08:00
CONFIG_AMIGA_PARTITION=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
dm: sandbox: Enable of-platdata for sandbox_spl Enable this feature so that we can use it for testing in sandbox_spl. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:58:20 +08:00
CONFIG_SPL_OF_PLATDATA=y
sandbox: Create a new sandbox_noinst build Move sandbox_spl over to use OF_PLATDATA_INST. Create a new board to test the case when this is not enabled, since we will be keeping that code around for several months and want to avoid regressions. Skip the dm_test_of_plat_dev() test since driver info is not available for OF_PLATDATA_INST. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-15 12:25:32 +08:00
CONFIG_SPL_OF_PLATDATA_INST=y
configs: sandbox: activate env in ext4 support Activate ENV in EXT4 support in sandbox. The sandbox behavior don't change; the default environment with the nowhere backend (CONFIG_ENV_IS_NOWHERE)is still used: the weak function env_get_location() return ENVL_NOWHERE for priority 0. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28 17:51:22 +08:00
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_EXT4=y
CONFIG_ENV_EXT4_INTERFACE="host"
CONFIG_ENV_EXT4_DEVICE_AND_PART="0:0"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-11 03:31:07 +08:00
CONFIG_BOOTP_SEND_HOSTNAME=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_NETCONSOLE=y
net: Convert CONFIG_IP_DEFRAG to Kconfig Convert CONFIG_IP_DEFRAG to Kconfig, update defconfigs, headers and whitelist. This patch is a follow-up on a patch by Christian Gmeiner with the added config/header/whitelist updates. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reported-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 10:51:14 +08:00
CONFIG_IP_DEFRAG=y
Convert CONFIG_BOOTP_SERVERIP to Kconfig This converts the following to Kconfig: CONFIG_BOOTP_SERVERIP Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-19 02:27:51 +08:00
CONFIG_BOOTP_SERVERIP=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_SPL_DM=y
dm: test: Add test case for dev->dma_offset Add test to validate dev->dma_offset is properly set on devices. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-01-12 20:55:25 +08:00
CONFIG_DM_DMA=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
CONFIG_DEVRES=y
CONFIG_DEBUG_DEVRES=y
Revert "sandbox: Disable I2C emulators in SPL" With recent changes this can be supported again. Add it back. This reverts commit d85f2c4f2970d0ec2f5f075de734afd11200d153. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-15 12:25:31 +08:00
# CONFIG_SPL_SIMPLE_BUS is not set
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_ADC=y
CONFIG_ADC_SANDBOX=y
Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-31 22:49:37 +08:00
CONFIG_SYS_SATA_MAX_DEVICE=2
sandbox: Add PCI driver and test for p2sb Add a sandbox driver and PCI-device emulator for p2sb. Also add a test which uses a simple 'adder' driver to test the p2sb functionality. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-07 12:41:57 +08:00
CONFIG_AXI=y
CONFIG_AXI_SANDBOX=y
Convert CONFIG_SYS_IDE_MAXBUS et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_IDE_MAXBUS CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ATA_STRIDE CONFIG_SYS_ATA_DATA_OFFSET CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_ALT_OFFSET CONFIG_SYS_ATA_IDE0_OFFSET CONFIG_SYS_ATA_IDE1_OFFSET CONFIG_ATAPI CONFIG_IDE_RESET Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-22 20:53:24 +08:00
CONFIG_SYS_IDE_MAXBUS=1
CONFIG_SYS_ATA_BASE_ADDR=0x100
CONFIG_SYS_ATA_STRIDE=4
CONFIG_SYS_ATA_DATA_OFFSET=0
CONFIG_SYS_ATA_REG_OFFSET=1
CONFIG_SYS_ATA_ALT_OFFSET=2
CONFIG_SYS_ATA_IDE0_OFFSET=0
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_CLK=y
dm: test: Add a test for of-platdata phandles We have a test in dtoc for this feature, but not one in U-Boot itself. Add a simple test that checks that the information comes through correctly. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-04 01:31:32 +08:00
CONFIG_SPL_CLK=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_CPU=y
CONFIG_DM_DEMO=y
CONFIG_DM_DEMO_SIMPLE=y
CONFIG_DM_DEMO_SHAPE=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-14 20:11:27 +08:00
CONFIG_SPL_FIRMWARE=y
sandbox, test: add test for GPIO_HOG function currently gpio hog function is not tested with "ut dm gpio" so add some basic tests for gpio hog functionality. For this enable GPIO_HOG in sandbox_defconfig, add in DTS some gpio hog entries, and add testcase in "ut dm gpio" command. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22 17:08:58 +08:00
CONFIG_GPIO_HOG=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_PM8916_GPIO=y
CONFIG_SANDBOX_GPIO=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_CROS_EC_LDO=y
CONFIG_DM_I2C_GPIO=y
dm: gpio: Add of-platdata support Add support for accessing GPIOs using of-plata. This uses the same mechanism as for clocks, but allows use of the xlate() method so that the driver can interpret the parameters. Update the condition for GPIO_HOG so that it is not built into SPL, since it needs SPL_OF_REAL which is not enabled in sandbox_spl. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-07 21:24:12 +08:00
# CONFIG_SPL_DM_I2C_GPIO is not set
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_SYS_I2C_SANDBOX=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_CROS_EC_KEYB=y
Convert CONFIG_SYS_CONSOLE_IS_IN_ENV and CONFIG_CONSOLE_MUX to Kconfig This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV CONFIG_CONSOLE_MUX Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Re-order, re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-18 10:12:37 +08:00
CONFIG_I8042_KEYB=y
test: Add tests for IOMMU uclass Add a set of tests for the IOMMU uclass. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-23 22:58:02 +08:00
CONFIG_IOMMU=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_LED=y
dm: led: Add support for blinking LEDs Allow LEDs to be blinked if the driver supports it. Enable this for sandbox so that the tests run. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-11 01:34:57 +08:00
CONFIG_LED_BLINK=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_LED_GPIO=y
CONFIG_DM_MAILBOX=y
CONFIG_SANDBOX_MBOX=y
CONFIG_MISC=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_LPC=y
CONFIG_CROS_EC_SANDBOX=y
CONFIG_CROS_EC_SPI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-23 02:38:00 +08:00
CONFIG_P2SB=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_PWRSEQ=y
CONFIG_SPL_PWRSEQ=y
mmc: sandbox: rename CONFIG, fix dependency, and use it in Makefile [1] Rename CONFIG_SANDBOX_MMC to CONFIG_MMC_SANDBOX for consistency I want all MMC driver options prefixed with CONFIG_MMC_. [2] Fix dependency Add necessary depends on to avoid compile error. Instead "depends on MMC" is unneeded because this config entry resides inside of "if MMC". [3] Currently, this config symbol is not referenced at all. Use it to enable/disable the driver in Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-30 18:46:50 +08:00
CONFIG_MMC_SANDBOX=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_SPI_FLASH_SANDBOX=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
nvme: Split out PCI support Apple SoCs have an integrated NVMe controller that isn't connected over a PCIe bus. In preparation for adding support for this NVMe controller, split out the PCI support into its own file. This file is selected through a new CONFIG_NVME_PCI Kconfig option, so do a wholesale replacement of CONFIG_NVME with CONFIG_NVME_PCI. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested on: Macbook Air M1 Tested-by: Simon Glass <sjg@chromium.org>
2022-01-23 03:38:11 +08:00
CONFIG_NVME_PCI=y
drivers/pci/Kconfig: Add PCI Add 'PCI' as a menu option and migrate all existing users. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-10-27 05:15:37 +08:00
CONFIG_PCI=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_PCI_SANDBOX=y
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-19 21:47:40 +08:00
CONFIG_PHY=y
CONFIG_PHY_SANDBOX=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_SANDBOX=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_ACT8846=y
CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_PMIC_MAX77686=y
sandbox: Enable MC34708 PMIC support This MC34708 PMIC is somewhat special - it used single transfers (R/W) with 3 bytes size - up till now U-Boot's PMICs only used 1 byte. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-15 22:26:41 +08:00
CONFIG_DM_PMIC_MC34708=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_PMIC_PM8916=y
power: rk808: rename to rk8xx Since this driver can be used for rk8xx series pmic, let's rename rk808 to rk8xx, to make it clear. Configs parts are done by sed -i "s/RK808/RK8XX/g" `grep RK808 -lr ./` Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
2017-05-02 14:54:52 +08:00
CONFIG_PMIC_RK8XX=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_PMIC_S2MPS11=y
CONFIG_DM_PMIC_SANDBOX=y
CONFIG_PMIC_S5M8767=y
CONFIG_PMIC_TPS65090=y
CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_ACT8846=y
CONFIG_DM_REGULATOR_PFUZE100=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_DM_REGULATOR_FIXED=y
power: rk808: rename to rk8xx Since this driver can be used for rk8xx series pmic, let's rename rk808 to rk8xx, to make it clear. Configs parts are done by sed -i "s/RK808/RK8XX/g" `grep RK808 -lr ./` Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
2017-05-02 14:54:52 +08:00
CONFIG_REGULATOR_RK8XX=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_REGULATOR_S5M8767=y
CONFIG_DM_REGULATOR_SANDBOX=y
CONFIG_REGULATOR_TPS65090=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-01 23:41:11 +08:00
CONFIG_DM_PWM=y
sandbox: cros-ec: Add tests for the Chromium OS EC PWM driver This patch adds a limited pulse-width modulator to sandbox's Chromium OS Embedded Controller emulation. The emulated PWM device supports multiple channels but can only set a duty cycle for each, as the actual EC doesn't expose any functionality or information other than that. Though the EC supports specifying the PWM channel by its type (e.g. display backlight, keyboard backlight), this is not implemented in the emulation as nothing in U-Boot uses this type specification. This emulated PWM device is then used to test the Chromium OS PWM driver in sandbox. Adding the required device node to the sandbox test device-tree unfortunately makes it the first PWM device, so this also touches some other tests to make sure they still use the sandbox PWM. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 00:33:31 +08:00
CONFIG_PWM_CROS_EC=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-01 23:41:11 +08:00
CONFIG_PWM_SANDBOX=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_RAM=y
CONFIG_REMOTEPROC_SANDBOX=y
CONFIG_DM_RESET=y
CONFIG_SANDBOX_RESET=y
CONFIG_DM_RTC=y
dm: Add a test for of-platdata parent information Add a simple test that we can obtain the correct parent for an I2C device. This requires updating the driver names to match the compatible strings, adding them to the devicetree and enabling a few options. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-04 01:31:36 +08:00
CONFIG_SPL_DM_RTC=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_SANDBOX_SERIAL=y
CONFIG_SOUND=y
CONFIG_SOUND_SANDBOX=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 20:46:52 +08:00
CONFIG_SOC_DEVICE=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_SANDBOX_SPI=y
CONFIG_SPMI=y
CONFIG_SPMI_SANDBOX=y
board: Rename uclass to sysinfo This uclass is intended to provide a way to obtain information about a U-Boot board. But the concept of a U-Boot 'board' is the whole system, not just one circuit board, meaning that 'board' is something of a misnomer for this uclass. In addition, the name 'board' is a bit overused in U-Boot and we want to use the same uclass to provide SMBIOS information. The obvious name is 'system' but that is so vague as to be meaningless. Use 'sysinfo' instead, since this uclass is aimed at providing information on the system. Rename everything accordingly. Note: Due to the patch delta caused by the symbol renames, this patch shows some renamed files as being deleted in one place and created in another. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-05 21:32:05 +08:00
CONFIG_SYSINFO=y
CONFIG_SYSINFO_SANDBOX=y
test: Add gpio-sysinfo test This adds a test for the gpio-sysinfo driver. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-20 22:50:58 +08:00
CONFIG_SYSINFO_GPIO=y
configs: Resync with savedefconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-09 04:11:59 +08:00
CONFIG_SYSRESET=y
sysreset: enable driver support in SPL/TPL SPL/TPL also need use sysreset for some feature like panic callback. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-04-02 20:41:25 +08:00
CONFIG_SPL_SYSRESET=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_TIMER=y
CONFIG_TIMER_EARLY=y
CONFIG_SANDBOX_TIMER=y
CONFIG_USB=y
CONFIG_USB_EMUL=y
CONFIG_USB_KEYBOARD=y
CONFIG_DM_VIDEO=y
CONFIG_CONSOLE_ROTATION=y
CONFIG_CONSOLE_TRUETYPE=y
CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y
Convert CONFIG_I2C_EDID et al to Kconfig This converts the following to Kconfig: CONFIG_I2C_EDID CONFIG_I2C_EEPROM Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-08 11:59:43 +08:00
CONFIG_I2C_EDID=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_VIDEO_SANDBOX_SDL=y
video_osd: Add osd sandbox driver and tests Add sandbox driver and tests for the new OSD uclass. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-27 15:19:31 +08:00
CONFIG_OSD=y
CONFIG_SANDBOX_OSD=y
Convert CONFIG_SPLASH_SCREEN et al to Kconfig This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-12 01:23:35 +08:00
CONFIG_SPLASH_SCREEN_ALIGN=y
fs: Kconfig: Add a separate config for FS_CBFS Rather than using CMD_CBFS for both the filesystem and its command, we should have a separate option for each. This allows us to enable CBFS support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply FS_CBFS on SYS_COREBOOT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 12:27:59 +08:00
CONFIG_FS_CBFS=y
fs: Kconfig: Add a separate option for FS_CRAMFS Rather than using CMD_CRAMFS for both the filesystem and its command, we should have a separate option for each. This allows us to enable CRAMFS support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply FS_CRAMFS for keymile] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 12:28:04 +08:00
CONFIG_FS_CRAMFS=y
spl: Allow tiny printf() to be controlled in SPL and TPL At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 22:56:27 +08:00
# CONFIG_SPL_USE_TINY_PRINTF is not set
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_CMD_DHRYSTONE=y
test: enable RSA library test on sandbox We want to always run RSA library test on sandbox build in Travis CI. Just adding CONFIG_RSA_VERIFY_WITH_PKEY would be good enough for this purpose. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-02-21 14:13:01 +08:00
CONFIG_RSA_VERIFY_WITH_PKEY=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_TPM=y
CONFIG_LZ4=y
CONFIG_ERRNO_STR=y
lib: disable CONFIG_SPL_HEXDUMP by default CONFIG_HEXDUMP is needed to display UEFI variables using 'printenv -e'. Enabling CONFIG_SPL_HEXDUMP only makes sense for debugging purposes. Hence CONFIG_SPL_HEXDUMP should not be enabled by default. The following boards currently have CONFIG_SPL_HEXDUMP=y. This includes boards that don't use SPL at all. axm_defconfig imx8mm-cl-iot-gate_defconfig imx8mm_venice_defconfig imxrt1020-evk_defconfig imxrt1050-evk_defconfig kontron_sl28_defconfig kp_imx53_defconfig lx2160ardb_tfa_stmm_defconfig mt7622_rfb_defconfig octeon_ebb7304_defconfig octeon_nic23_defconfig qemu_arm64_defconfig qemu_arm_defconfig qemu-riscv32_defconfig qemu-riscv32_smode_defconfig qemu-riscv64_defconfig qemu-riscv64_smode_defconfig qemu-x86_64_defconfig qemu-x86_defconfig sandbox64_defconfig sandbox_defconfig stm32mp15_basic_defconfig stm32mp15_trusted_defconfig synquacer_developerbox_defconfig taurus_defconfig xilinx_versal_virt_defconfig The patch only keeps it enabled on sandbox_spl_defconfig Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-24 23:35:46 +08:00
CONFIG_HEXDUMP=y
CONFIG_SPL_HEXDUMP=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_UNIT_TEST=y
dm: test: Build tests for SPL We want to run unit tests in SPL. Add a new Kconfig to control this and enable it for sandbox_spl Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-26 10:38:26 +08:00
CONFIG_SPL_UNIT_TEST=y
sandbox: Add a new sandbox_spl board It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 01:57:54 +08:00
CONFIG_UT_TIME=y
CONFIG_UT_DM=y
Reference in New Issue Copy Permalink