mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-04 10:03:41 +08:00
Code Issues Packages Projects Releases Wiki Activity
5bda1878b9
u-boot/configs/am64x_evm_a53_defconfig

144 lines
3.5 KiB
Plaintext
Raw Normal View History

configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_ARM=y
CONFIG_ARCH_K3=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_NR_DRAM_BANKS=2
CONFIG_SOC_K3_AM642=y
configs: am64x_evm_*_defconfig: Rearrange the components in SRAM to satisfy the limitations for USB DFU boot mode For USB DFU boot mode there is a limitation on the load address of boot images that they have to be less than 0x70001000. Therefore, move the SPL_TEXT_BASE address to 0x70000000. Currently ATF is being loaded at 0x70000000, if the SPL is being loaded at 0x70000000 then ATF would overwrite SPL image when loaded. Therefore, move the location of ATF to a latter location in SRAM, past the SPL image. Also rearrange the EEPROM and BSS data on top of ATF. Given below is the placement of various data sections in SRAM ┌──────────────────────────────────────┐0x70000000 │ │ │ │ │ │ │ SPL IMAGE (Max size 1.5 MB) │ │ │ │ │ │ │ ├──────────────────────────────────────┤0x7017FFFF │ │ │ SPL STACK │ │ │ ├──────────────────────────────────────┤0x70192727 │ GLOBAL DATA(216 B) │ ├──────────────────────────────────────┤0x701927FF │ │ │ INITIAL HEAP (32 KB) │ │ │ ├──────────────────────────────────────┤0x7019A7FF │ │ │ BSS (20 KB) │ ├──────────────────────────────────────┤0x7019F7FF │ EEPROM DATA (2 KB) │ ├──────────────────────────────────────┤0x7019FFFF │ │ │ │ │ ATF (123 KB) │ │ │ │ │ ├──────────────────────────────────────┤0x701BEBFB │ BOOT PARAMETER INDEX TABLE (5124 B)│ ├──────────────────────────────────────┤0x701BFFFF │ │ │SYSFW FIREWALLED DUE TO A BUG (128 KB)│ │ │ ├──────────────────────────────────────┤0x701DFFFF │ │ │ DMSC CODE AREA (128 KB) │ │ │ └──────────────────────────────────────┘0x701FFFFF Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-9-a-govindraju@ti.com
2021-06-05 00:30:38 +08:00
CONFIG_K3_ATF_LOAD_ADDR=0x701a0000
configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_TARGET_AM642_A53_EVM=y
CONFIG_ENV_SIZE=0x20000
CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
CONFIG_SPL_DM_SPI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 22:17:29 +08:00
CONFIG_DEFAULT_DEVICE_TREE="k3-am642-evm"
configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
configs: am64: Enable configs to support USB host and device modes Enable config options required to add support for USB Mass storage boot, USB DFU boot, host and device modes in U-Boot. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-11-a-govindraju@ti.com
2021-06-05 00:30:40 +08:00
CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run run_kern"
configs: am64x_evm_a53: Enable support for reading eeprom Enable relevant configs for reading eeprom data and updating env variables. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-06 19:15:04 +08:00
CONFIG_BOARD_LATE_INIT=y
configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA=y
configs: am64x_evm_a53: Enable support for building multiple dtbs Enable all relevant configs for building multiple dtbs into a single fit image and load the right dtb for next stage. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-06 19:15:05 +08:00
CONFIG_SPL_I2C_SUPPORT=y
configs: am64: Enable configs to support USB host and device modes Enable config options required to add support for USB Mass storage boot, USB DFU boot, host and device modes in U-Boot. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-11-a-govindraju@ti.com
2021-06-05 00:30:40 +08:00
CONFIG_SPL_ENV_SUPPORT=y
configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_SPI_LOAD=y
configs: am64: Enable configs to support USB host and device modes Enable config options required to add support for USB Mass storage boot, USB DFU boot, host and device modes in U-Boot. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-11-a-govindraju@ti.com
2021-06-05 00:30:40 +08:00
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_STORAGE=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_DFU=y
configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_ASKENV=y
configs: am64x_evm_a53: Enable support for reading eeprom Enable relevant configs for reading eeprom data and updating env variables. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-06 19:15:04 +08:00
CONFIG_CMD_I2C=y
configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_CMD_MMC=y
CONFIG_CMD_TIME=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
configs: am64x_evm_a53: Enable support for building multiple dtbs Enable all relevant configs for building multiple dtbs into a single fit image and load the right dtb for next stage. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-06 19:15:05 +08:00
CONFIG_OF_LIST="k3-am642-evm k3-am642-sk"
CONFIG_MULTI_DTB_FIT=y
configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_ENV_FAT_DEVICE_AND_PART="1:1"
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CLK_TI_SCI=y
CONFIG_DMA_CHANNELS=y
CONFIG_TI_K3_NAVSS_UDMA=y
CONFIG_TI_SCI_PROTOCOL=y
configs: am64x_evm_a53: Enable support for reading eeprom Enable relevant configs for reading eeprom data and updating env variables. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-06 19:15:04 +08:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_OMAP24XX=y
configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_DM_MAILBOX=y
CONFIG_K3_SEC_PROXY=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ADMA=y
CONFIG_SPL_MMC_SDHCI_ADMA=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
configs: am64x_evm_a53_defconfig: Enable DP83867 PHY driver AM64x GP and SK EVM have DP83867 PHY connected to CPSW external port0. Enable the driver in order to use ethernet at U-Boot prompt. CONFIG_PHY_TI is selected by CONFIG_PHY_TI_DP83867 and thus can be dropped. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12 22:38:25 +08:00
CONFIG_PHY_TI_DP83867=y
configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH=y
CONFIG_TI_AM65_CPSW_NUSS=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_POWER_DOMAIN=y
CONFIG_TI_SCI_POWER_DOMAIN=y
CONFIG_K3_SYSTEM_CONTROLLER=y
CONFIG_REMOTEPROC_TI_K3_ARM64=y
CONFIG_DM_RESET=y
CONFIG_RESET_TI_SCI=y
CONFIG_DM_SERIAL=y
configs: am64x_evm_a53: Enable configs for printing cpuinfo Enable all relevant configs for printing CPU info. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-06 19:15:03 +08:00
CONFIG_SOC_DEVICE=y
CONFIG_SOC_DEVICE_TI_K3=y
configs: am64x_evm_a53: Add Initial support Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-04-24 00:27:48 +08:00
CONFIG_SOC_TI=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_CADENCE_QSPI=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_TI_SCI=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_OMAP_TIMER=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
configs: am64: Enable configs to support USB host and device modes Enable config options required to add support for USB Mass storage boot, USB DFU boot, host and device modes in U-Boot. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-11-a-govindraju@ti.com
2021-06-05 00:30:40 +08:00
CONFIG_CMD_DFU=y
CONFIG_CMD_DM=y
CONFIG_CMD_USB=y
CONFIG_DFU=y
CONFIG_DFU_OVER_USB=y
# CONFIG_DFU_TFTP is not set
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
# CONFIG_DFU_VIRT is not set
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_SPL_DM_USB_GADGET=y
CONFIG_USB_HOST=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_CDNS3=y
CONFIG_USB_CDNS3_GADGET=y
CONFIG_SPL_USB_CDNS3_GADGET=y
CONFIG_USB_CDNS3_HOST=y
CONFIG_SPL_USB_CDNS3_HOST=y
CONFIG_USB_CDNS3_TI=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_FUNCTION_MASS_STORAGE=y
Reference in New Issue Copy Permalink