mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-23 12:14:32 +08:00
Code Issues Packages Projects Releases Wiki Activity
52c0e5f8a3
u-boot/configs/khadas-vim3_android_defconfig

120 lines
2.8 KiB
Plaintext
Raw Normal View History

configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_ARM=y
CONFIG_SYS_BOARD="vim3"
CONFIG_SYS_CONFIG_NAME="khadas-vim3_android"
CONFIG_ARCH_MESON=y
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 08:22:39 +08:00
CONFIG_TEXT_BASE=0x01000000
configs: khadas-vim3*_android: fix AVB oom error When booting Android with AVB enabled, an OOM is observed: => avb init ${mmcdev} => avb verify _a ## Android Verified Boot 2.0 version 1.1.0 read_is_device_unlocked not supported yet read_rollback_index not supported yet avb_util.c:182: ERROR: Failed to allocate memory. OOM error occurred during verification A custom malloc length of 128MB is required as documented in commit 285a83b12bdf ("configs: meson64_android: increase SYS_MALLOC_LEN to 128M for AVB") However, this 128M custom malloc length was not ported to Kconfig in commit 7cfbba36e9f8 ("Convert CONFIG_SYS_MALLOC_LEN to Kconfig") Add it back to fix AVB verification on VIM3/VIM3L. Fixes: 7cfbba36e9f8 ("Convert CONFIG_SYS_MALLOC_LEN to Kconfig") Co-developed-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com> Link: https://lore.kernel.org/r/20240209-vim3-avb-malloc-v1-1-91427d8c19ab@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-02-09 16:58:35 +08:00
CONFIG_SYS_MALLOC_LEN=0x08000000
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_NR_DRAM_BANKS=1
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 22:58:06 +08:00
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_ENV_SIZE=0x10000
configs: khadas-vim3*_android: fix environment saving The environment is used to configure some additional boot features such as: * extra boot arguments * enable AVB (Android Verified Boot) verification Right now, we cannot store it in eMMC: Loading Environment from nowhere... OK Fix it by enabling the appropriate options in the defconfig Fixes: b749d5ecdc06 ("configs: meson64_android: define raw parts for bootloader") Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231026-fix-saveenv-v1-1-6aa59be65481@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-26 21:41:31 +08:00
CONFIG_ENV_OFFSET=0x0
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_DM_GPIO=y
dts: meson-g12a: Switch to using upstream DT Enable OF_UPSTREAM to use upstream DT and add amlogic/ prefix to the DEFAULT_DEVICE_TREE. And thereby directly build DTB from dts/upstream/src/ including *-u-boot.dtsi files from arch/$(ARCH)/dts/ directory. Cc: Sumit Garg <sumit.garg@linaro.org> Acked-by: Viacheslav Bocharov <adeep@lexina.in> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # khadas-vim3_android Link: https://lore.kernel.org/r/20240329-u-boot-of-upstream-v2-4-2512ad3eb63d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-03-30 01:51:51 +08:00
CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-a311d-khadas-vim3"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 23:50:26 +08:00
CONFIG_OF_LIBFDT_OVERLAY=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 22:58:06 +08:00
CONFIG_DM_RESET=y
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_MESON_G12A=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-10-08 23:18:32 +08:00
CONFIG_SYS_LOAD_ADDR=0x1000000
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_DEBUG_UART_BASE=0xff803000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" khadas-vim3"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 23:50:26 +08:00
CONFIG_PCI=y
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_DEBUG_UART=y
Convert CONFIG_REMAKE_ELF to Kconfig This converts the following to Kconfig: CONFIG_REMAKE_ELF Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-01-29 23:25:30 +08:00
CONFIG_REMAKE_ELF=y
ARM: meson: enable FIT with LEGACY_IMAGE_FORMAT on all configs Allow all boards to boot with a fitImage, but keep support for Legacy image format for now. Link: https://lore.kernel.org/r/20231023-usb-dfu-boot-v1-1-df9d121c67c1@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-23 20:41:34 +08:00
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_LEGACY_IMAGE_FORMAT=y
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_AVB_VERIFY=y
Convert CONFIG_SYS_MAXARGS to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-12 04:21:06 +08:00
CONFIG_SYS_MAXARGS=32
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
# CONFIG_CMD_BDI is not set
CONFIG_CMD_ADTIMG=y
CONFIG_CMD_ABOOTIMG=y
# CONFIG_CMD_IMI is not set
CONFIG_CMD_BCB=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
CONFIG_CMD_SF_TEST=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_AVB=y
CONFIG_OF_CONTROL=y
configs: khadas-vim3*_android: fix environment saving The environment is used to configure some additional boot features such as: * extra boot arguments * enable AVB (Android Verified Boot) verification Right now, we cannot store it in eMMC: Loading Environment from nowhere... OK Fix it by enabling the appropriate options in the defconfig Fixes: b749d5ecdc06 ("configs: meson64_android: define raw parts for bootloader") Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231026-fix-saveenv-v1-1-6aa59be65481@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-26 21:41:31 +08:00
CONFIG_ENV_IS_IN_MMC=y
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
configs: khadas-vim3*_android: fix environment saving The environment is used to configure some additional boot features such as: * extra boot arguments * enable AVB (Android Verified Boot) verification Right now, we cannot store it in eMMC: Loading Environment from nowhere... OK Fix it by enabling the appropriate options in the defconfig Fixes: b749d5ecdc06 ("configs: meson64_android: define raw parts for bootloader") Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231026-fix-saveenv-v1-1-6aa59be65481@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-26 21:41:31 +08:00
CONFIG_SYS_MMC_ENV_DEV=2
CONFIG_SYS_MMC_ENV_PART=2
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_ADC=y
CONFIG_SARADC_MESON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_ADC=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x6000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=2
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MESON=y
CONFIG_MMC_MESON_GX=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHY_REALTEK=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MESON_G12A=y
nvme: Split out PCI support Apple SoCs have an integrated NVMe controller that isn't connected over a PCIe bus. In preparation for adding support for this NVMe controller, split out the PCI support into its own file. This file is selected through a new CONFIG_NVME_PCI Kconfig option, so do a wholesale replacement of CONFIG_NVME with CONFIG_NVME_PCI. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested on: Macbook Air M1 Tested-by: Simon Glass <sjg@chromium.org>
2022-01-23 03:38:11 +08:00
CONFIG_NVME_PCI=y
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_PCIE_DW_MESON=y
CONFIG_MESON_G12A_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_G12A=y
CONFIG_POWER_DOMAIN=y
CONFIG_MESON_EE_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MESON_SPIFC=y
CONFIG_SYSINFO=y
CONFIG_SYSINFO_SMBIOS=y
CONFIG_USB=y
ARM: meson: g12a: switch dwc2 otg to DM With CONFIG_DM_USB_GADGET=y, we no longer need any board_usb_*() logic because: * the dwc2 driver is DM compatible, and handles its own clock enabling * the dwc3-meson-g12a glue drivers handles "force mode switching" Remove all mach-meson/g12a usb code and enable CONFIG_DM_USB_GADGET. Note: Only configs having both CONFIG_USB_DWC3_MESON_G12A=y *and* USB_GADGET_DWC2_OTG=y have been updated. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20221024-meson-dm-usb-v1-2-2ab077a503b9@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-11-23 23:42:50 +08:00
CONFIG_DM_USB_GADGET=y
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_MESON_G12A=y
CONFIG_USB_KEYBOARD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-18 21:46:31 +08:00
CONFIG_VIDEO=y
configs: add khadas-vim3{l}_android for AOSP support The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
2021-11-22 23:22:05 +08:00
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP16 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
CONFIG_SPLASH_SCREEN=y
CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_VIDEO_BMP_RLE8=y
CONFIG_BMP_16BPP=y
CONFIG_BMP_24BPP=y
CONFIG_BMP_32BPP=y
CONFIG_LIBAVB=y
Reference in New Issue Copy Permalink