u-boot/tools/mips-relocs.c

420 lines
9.2 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-20 02:53:47 +08:00
/*
* MIPS Relocation Data Generator
*
* Copyright (c) 2017 Imagination Technologies Ltd.
*/
#include <assert.h>
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-20 02:53:47 +08:00
#include <elf.h>
#include <errno.h>
#include <fcntl.h>
#include <limits.h>
#include <stdbool.h>
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-20 02:53:47 +08:00
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <unistd.h>
#include <asm/relocs.h>
#define hdr_field(pfx, idx, field) ({ \
uint64_t _val; \
unsigned int _size; \
\
if (is_64) { \
_val = pfx##hdr64[idx].field; \
_size = sizeof(pfx##hdr64[0].field); \
} else { \
_val = pfx##hdr32[idx].field; \
_size = sizeof(pfx##hdr32[0].field); \
} \
\
switch (_size) { \
case 1: \
break; \
case 2: \
_val = is_be ? be16toh(_val) : le16toh(_val); \
break; \
case 4: \
_val = is_be ? be32toh(_val) : le32toh(_val); \
break; \
case 8: \
_val = is_be ? be64toh(_val) : le64toh(_val); \
break; \
} \
\
_val; \
})
#define set_hdr_field(pfx, idx, field, val) ({ \
uint64_t _val; \
unsigned int _size; \
\
if (is_64) \
_size = sizeof(pfx##hdr64[0].field); \
else \
_size = sizeof(pfx##hdr32[0].field); \
\
switch (_size) { \
case 1: \
_val = val; \
break; \
case 2: \
_val = is_be ? htobe16(val) : htole16(val); \
break; \
case 4: \
_val = is_be ? htobe32(val) : htole32(val); \
break; \
case 8: \
_val = is_be ? htobe64(val) : htole64(val); \
break; \
default: \
/* We should never reach here */ \
_val = 0; \
assert(0); \
break; \
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-20 02:53:47 +08:00
} \
\
if (is_64) \
pfx##hdr64[idx].field = _val; \
else \
pfx##hdr32[idx].field = _val; \
})
#define ehdr_field(field) \
hdr_field(e, 0, field)
#define phdr_field(idx, field) \
hdr_field(p, idx, field)
#define shdr_field(idx, field) \
hdr_field(s, idx, field)
#define set_phdr_field(idx, field, val) \
set_hdr_field(p, idx, field, val)
#define set_shdr_field(idx, field, val) \
set_hdr_field(s, idx, field, val)
#define shstr(idx) (&shstrtab[idx])
bool is_64, is_be;
uint64_t text_base;
struct mips_reloc {
uint8_t type;
uint64_t offset;
} *relocs;
size_t relocs_sz, relocs_idx;
static int add_reloc(unsigned int type, uint64_t off)
{
struct mips_reloc *new;
size_t new_sz;
switch (type) {
case R_MIPS_NONE:
case R_MIPS_LO16:
case R_MIPS_PC16:
case R_MIPS_HIGHER:
case R_MIPS_HIGHEST:
case R_MIPS_PC21_S2:
case R_MIPS_PC26_S2:
/* Skip these relocs */
return 0;
default:
break;
}
if (relocs_idx == relocs_sz) {
new_sz = relocs_sz ? relocs_sz * 2 : 128;
new = realloc(relocs, new_sz * sizeof(*relocs));
if (!new) {
fprintf(stderr, "Out of memory\n");
return -ENOMEM;
}
relocs = new;
relocs_sz = new_sz;
}
relocs[relocs_idx++] = (struct mips_reloc){
.type = type,
.offset = off,
};
return 0;
}
static int parse_mips32_rel(const void *_rel)
{
const Elf32_Rel *rel = _rel;
uint32_t off, type;
off = is_be ? be32toh(rel->r_offset) : le32toh(rel->r_offset);
off -= text_base;
type = is_be ? be32toh(rel->r_info) : le32toh(rel->r_info);
type = ELF32_R_TYPE(type);
return add_reloc(type, off);
}
static int parse_mips64_rela(const void *_rel)
{
const Elf64_Rela *rel = _rel;
uint64_t off, type;
off = is_be ? be64toh(rel->r_offset) : le64toh(rel->r_offset);
off -= text_base;
type = rel->r_info >> (64 - 8);
return add_reloc(type, off);
}
static void output_uint(uint8_t **buf, uint64_t val)
{
uint64_t tmp;
do {
tmp = val & 0x7f;
val >>= 7;
tmp |= !!val << 7;
*(*buf)++ = tmp;
} while (val);
}
static int compare_relocs(const void *a, const void *b)
{
const struct mips_reloc *ra = a, *rb = b;
return ra->offset - rb->offset;
}
int main(int argc, char *argv[])
{
unsigned int i, j, i_rel_shdr, sh_type, sh_entsize, sh_entries;
size_t rel_size, rel_actual_size;
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-20 02:53:47 +08:00
const char *shstrtab, *sh_name, *rel_pfx;
int (*parse_fn)(const void *rel);
uint8_t *buf_start, *buf;
const Elf32_Ehdr *ehdr32;
const Elf64_Ehdr *ehdr64;
uintptr_t sh_offset;
Elf32_Shdr *shdr32;
Elf64_Shdr *shdr64;
struct stat st;
int err, fd;
void *elf;
bool skip;
fd = open(argv[1], O_RDWR);
if (fd == -1) {
fprintf(stderr, "Unable to open input file %s\n", argv[1]);
err = errno;
goto out_ret;
}
err = fstat(fd, &st);
if (err) {
fprintf(stderr, "Unable to fstat() input file\n");
goto out_close_fd;
}
elf = mmap(NULL, st.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
if (elf == MAP_FAILED) {
fprintf(stderr, "Unable to mmap() input file\n");
err = errno;
goto out_close_fd;
}
ehdr32 = elf;
ehdr64 = elf;
if (memcmp(&ehdr32->e_ident[EI_MAG0], ELFMAG, SELFMAG)) {
fprintf(stderr, "Input file is not an ELF\n");
err = -EINVAL;
goto out_free_relocs;
}
if (ehdr32->e_ident[EI_VERSION] != EV_CURRENT) {
fprintf(stderr, "Unrecognised ELF version\n");
err = -EINVAL;
goto out_free_relocs;
}
switch (ehdr32->e_ident[EI_CLASS]) {
case ELFCLASS32:
is_64 = false;
break;
case ELFCLASS64:
is_64 = true;
break;
default:
fprintf(stderr, "Unrecognised ELF class\n");
err = -EINVAL;
goto out_free_relocs;
}
switch (ehdr32->e_ident[EI_DATA]) {
case ELFDATA2LSB:
is_be = false;
break;
case ELFDATA2MSB:
is_be = true;
break;
default:
fprintf(stderr, "Unrecognised ELF data encoding\n");
err = -EINVAL;
goto out_free_relocs;
}
if (ehdr_field(e_type) != ET_EXEC) {
fprintf(stderr, "Input ELF is not an executable\n");
printf("type 0x%lx\n", ehdr_field(e_type));
err = -EINVAL;
goto out_free_relocs;
}
if (ehdr_field(e_machine) != EM_MIPS) {
fprintf(stderr, "Input ELF does not target MIPS\n");
err = -EINVAL;
goto out_free_relocs;
}
shdr32 = elf + ehdr_field(e_shoff);
shdr64 = elf + ehdr_field(e_shoff);
shstrtab = elf + shdr_field(ehdr_field(e_shstrndx), sh_offset);
i_rel_shdr = UINT_MAX;
for (i = 0; i < ehdr_field(e_shnum); i++) {
sh_name = shstr(shdr_field(i, sh_name));
if (!strcmp(sh_name, ".data.reloc")) {
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-20 02:53:47 +08:00
i_rel_shdr = i;
continue;
}
if (!strcmp(sh_name, ".text")) {
text_base = shdr_field(i, sh_addr);
continue;
}
}
if (i_rel_shdr == UINT_MAX) {
fprintf(stderr, "Unable to find .rel section\n");
err = -EINVAL;
goto out_free_relocs;
}
if (!text_base) {
fprintf(stderr, "Unable to find .text base address\n");
err = -EINVAL;
goto out_free_relocs;
}
rel_pfx = is_64 ? ".rela" : ".rel";
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-20 02:53:47 +08:00
for (i = 0; i < ehdr_field(e_shnum); i++) {
sh_type = shdr_field(i, sh_type);
if ((sh_type != SHT_REL) && (sh_type != SHT_RELA))
continue;
sh_name = shstr(shdr_field(i, sh_name));
if (strncmp(sh_name, rel_pfx, strlen(rel_pfx))) {
fprintf(stderr, "WARNING: Unexpected reloc section name '%s'\n", sh_name);
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-20 02:53:47 +08:00
continue;
}
if (!strcmp(sh_name, ".rel") || !strcmp(sh_name, ".rel.dyn"))
continue;
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-20 02:53:47 +08:00
/*
* Skip reloc sections which either don't correspond to another
* section in the ELF, or whose corresponding section isn't
* loaded as part of the U-Boot binary (ie. doesn't have the
* alloc flags set).
*/
skip = true;
for (j = 0; j < ehdr_field(e_shnum); j++) {
if (strcmp(&sh_name[strlen(rel_pfx)], shstr(shdr_field(j, sh_name))))
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-20 02:53:47 +08:00
continue;
skip = !(shdr_field(j, sh_flags) & SHF_ALLOC);
break;
}
if (skip)
continue;
sh_offset = shdr_field(i, sh_offset);
sh_entsize = shdr_field(i, sh_entsize);
sh_entries = shdr_field(i, sh_size) / sh_entsize;
if (sh_type == SHT_REL) {
if (is_64) {
fprintf(stderr, "REL-style reloc in MIPS64 ELF?\n");
err = -EINVAL;
goto out_free_relocs;
} else {
parse_fn = parse_mips32_rel;
}
} else {
if (is_64) {
parse_fn = parse_mips64_rela;
} else {
fprintf(stderr, "RELA-style reloc in MIPS32 ELF?\n");
err = -EINVAL;
goto out_free_relocs;
}
}
for (j = 0; j < sh_entries; j++) {
err = parse_fn(elf + sh_offset + (j * sh_entsize));
if (err)
goto out_free_relocs;
}
}
/* Sort relocs in ascending order of offset */
qsort(relocs, relocs_idx, sizeof(*relocs), compare_relocs);
/* Make reloc offsets relative to their predecessor */
for (i = relocs_idx - 1; i > 0; i--)
relocs[i].offset -= relocs[i - 1].offset;
/* Write the relocations to the .rel section */
buf = buf_start = elf + shdr_field(i_rel_shdr, sh_offset);
for (i = 0; i < relocs_idx; i++) {
output_uint(&buf, relocs[i].type);
output_uint(&buf, relocs[i].offset >> 2);
}
/* Write a terminating R_MIPS_NONE (0) */
output_uint(&buf, R_MIPS_NONE);
/* Ensure the relocs didn't overflow the .rel section */
rel_size = shdr_field(i_rel_shdr, sh_size);
rel_actual_size = buf - buf_start;
if (rel_actual_size > rel_size) {
fprintf(stderr, "Relocations overflow available space of 0x%lx (required 0x%lx)!\n",
rel_size, rel_actual_size);
fprintf(stderr, "Please adjust CONFIG_MIPS_RELOCATION_TABLE_SIZE to at least 0x%lx\n",
(rel_actual_size + 0x100) & ~0xFF);
err = -ENOMEM;
goto out_free_relocs;
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-20 02:53:47 +08:00
}
/* Make sure data is written back to the file */
err = msync(elf, st.st_size, MS_SYNC);
if (err) {
fprintf(stderr, "Failed to msync: %d\n", errno);
goto out_free_relocs;
}
out_free_relocs:
free(relocs);
munmap(elf, st.st_size);
out_close_fd:
close(fd);
out_ret:
return err;
}