mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-04 01:53:27 +08:00
Code Issues Packages Projects Releases Wiki Activity
406257ae41
u-boot/configs/m53menlo_defconfig

124 lines
3.0 KiB
Plaintext
Raw Normal View History

arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_ARM=y
ARM: imx: mx5: Enable Thumb2 build on MX53 Menlo board Build U-Boot in Thumb2 mode for M53Menlo board, this makes better use of the CPU since the instruction density is higher. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2021-09-12 06:39:59 +08:00
CONFIG_SYS_THUMB_BUILD=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_ARCH_MX5=y
CONFIG_SYS_TEXT_BASE=0x71000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 20:19:22 +08:00
CONFIG_SYS_MALLOC_LEN=0xa00000
CONFIG_SYS_MALLOC_F_LEN=0x8000
Rename GPIO_SUPPORT to GPIO Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 11:14:30 +08:00
CONFIG_SPL_GPIO=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-11 03:31:07 +08:00
CONFIG_NR_DRAM_BANKS=2
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 09:02:10 +08:00
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x100000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-29 04:15:47 +08:00
CONFIG_TARGET_M53MENLO=y
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 11:12:33 +08:00
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-23 02:38:00 +08:00
CONFIG_DM_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 22:17:29 +08:00
CONFIG_DEFAULT_DEVICE_TREE="imx53-m53menlo"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-07 01:54:25 +08:00
CONFIG_SPL_TEXT_BASE=0x70008000
serial: Rename SERIAL_SUPPORT to SERIAL Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-09 02:20:12 +08:00
CONFIG_SPL_SERIAL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-07 02:42:52 +08:00
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_BOOTCOUNT_ADDR=0x53FA401C
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_SPL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-27 02:45:25 +08:00
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-29 02:28:38 +08:00
CONFIG_ENV_OFFSET_REDUND=0x180000
Convert CONFIG_SYS_LOAD_ADDR to Kconfig Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-23 22:25:31 +08:00
CONFIG_SYS_LOAD_ADDR=0x70800000
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttymxc0,115200"
Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-21 10:51:14 +08:00
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="run try_bootscript"
ARM: imx: m53menlo: Convert to DM VIDEO Enable DM Video support on iMX53 M53Menlo and fix minor details to restore previous behavior of the system. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-10 00:46:46 +08:00
CONFIG_BOARD_LATE_INIT=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_NAND_SUPPORT=y
Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOG Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 11:14:28 +08:00
CONFIG_SPL_WATCHDOG=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
ARM: imx: m53menlo: Convert MMC, USB and block to DM Enable DM block and DM MMC and DM USB support on iMX53 M53Menlo . Convert board code to match the DM support. This also enables DM pincontrol to configure the SDHI pins. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-10 00:46:44 +08:00
CONFIG_CMD_DM=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_FUSE=y
ARM: imx: m53menlo: Enable DM GPIO Enable DM GPIO support on iMX53 M53Menlo and fix up board code where applicable. Enable MALLOC_F to let the GPIO controllers bind early on. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-10 00:46:43 +08:00
CONFIG_CMD_GPIO=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
ARM: imx: m53menlo: Convert MMC, USB and block to DM Enable DM block and DM MMC and DM USB support on iMX53 M53Menlo . Convert board code to match the DM support. This also enables DM pincontrol to configure the SDHI pins. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-10 00:46:44 +08:00
# CONFIG_CMD_PINMUX is not set
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_BMP=y
arm: mx5: Enable WDT and bootcounter on M53Menlo Enable watchdog and bootcounter support on the M53Menlo board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-12-07 09:36:38 +08:00
CONFIG_CMD_BOOTCOUNT=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_CMD_DATE=y
CONFIG_CMD_BTRFS=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 08:54:45 +08:00
CONFIG_CMD_MTDPARTS=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:1m(u-boot),512k(env1),512k(env2),-(ubi)"
CONFIG_CMD_UBI=y
ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux Import iMX53 M53Menlo device tree from Linux next-20190607 3f310e51ceb1 . Enable DT control in full U-Boot . Add U-Boot extras into separate DTSi, the GPIO controllers need to be inited early, otherwise m53_set_clock() won't be able to detect the correct CPU clock frequency by reading the GPIO. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-10 00:46:42 +08:00
CONFIG_OF_CONTROL=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_ENV_IS_IN_NAND=y
defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-11 00:28:03 +08:00
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 11:46:36 +08:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-10 00:22:06 +08:00
CONFIG_VERSION_VARIABLE=y
ARM: imx: m53menlo: Enable DM GPIO Enable DM GPIO support on iMX53 M53Menlo and fix up board code where applicable. Enable MALLOC_F to let the GPIO controllers bind early on. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-10 00:46:43 +08:00
CONFIG_DM=y
arm: mx5: Enable WDT and bootcounter on M53Menlo Enable watchdog and bootcounter support on the M53Menlo board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-12-07 09:36:38 +08:00
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_SYS_BOOTCOUNT_MAGIC=0x0B01C041
Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 11:12:24 +08:00
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SPL_SYS_I2C_LEGACY=y
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 11:12:33 +08:00
CONFIG_SYS_I2C_MXC=y
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
2019-06-21 11:42:28 +08:00
CONFIG_FSL_ESDHC_IMX=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-05 06:18:38 +08:00
CONFIG_MTD=y
mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-04 01:50:03 +08:00
CONFIG_MTD_RAW_NAND=y
mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig Convert CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig, update defconfigs, headers and whitelist. Please note that this symbol already was used in Kconfig (imply in CONFIG_NAND_ATMEL) which did not work, since this symbol was not available in Kconfig. This changes now with this patch and all boards with CONFIG_NAND_ATMEL will have BBT enabled. Which is what I also need on my GARDENA AT91SAM based board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> [trini: Rework such that the configs are unchanged to start with] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-22 18:28:04 +08:00
CONFIG_SYS_NAND_USE_FLASH_BBT=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_NAND_MXC=y
Convert CONFIG_SPL_NAND_LOAD et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_NAND_LOAD CONFIG_SYS_NAND_BLOCK_SIZE CONFIG_SYS_NAND_PAGE_SIZE CONFIG_SYS_NAND_OOBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-23 02:50:29 +08:00
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
Convert CONFIG_SYS_NAND_PAGE_COUNT to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_PAGE_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-23 02:50:30 +08:00
CONFIG_SYS_NAND_PAGE_COUNT=0x40
Convert CONFIG_SPL_NAND_LOAD et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_NAND_LOAD CONFIG_SYS_NAND_BLOCK_SIZE CONFIG_SYS_NAND_PAGE_SIZE CONFIG_SYS_NAND_OOBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-23 02:50:29 +08:00
CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_U_BOOT_LOCATIONS CONFIG_SYS_NAND_U_BOOT_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-23 02:50:38 +08:00
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x8000
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together Commit d397f7c45b0b ("net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers") separated the KSZ8xxx and KSZ90x1 drivers and warns that you shouldn't select both of them due to a device ID clash between the KSZ9021 and the KS8721, asserting that "it is highly unlikely for a system to contain both a KSZ8000 and a KSZ9000 PHY". Unfortunately boards like the SAMA5D3xEK do contain both types of PHY, but fortunately the Linux Micrel PHY driver provides a solution by using different PHY ID and mask values to distinguish these chips. This commit contains the following changes: - The PHY ID and mask values for the KSZ9021 and the KS8721 now match those used by the Linux driver. - The warnings about not enabling both drivers have been removed. - The description for PHY_MICREL_KSZ8XXX has been corrected (these are 10/100 PHYs, not GbE PHYs). - PHY_MICREL_KSZ9021 and PHY_MICREL_KSZ9031 no longer select PHY_GIGE since this is selected by PHY_MICREL_KSZ90X1. - All of the relevant defconfig files have been updated now that PHY_MICREL_KSZ8XXX does not default to 'Y'. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-03-06 20:48:27 +08:00
CONFIG_PHY_MICREL_KSZ8XXX=y
ARM: dts: imx: m53menlo: Convert to DM_ETH Convert the board to DM_ETH instead of legacy networking. This requires a minor addition to the DT to satisfy the requirement for specifying a PHY node. No functional change from board user perspective. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2020-05-31 04:44:46 +08:00
CONFIG_DM_ETH=y
CONFIG_DM_MDIO=y
CONFIG_DM_ETH_PHY=y
Convert CONFIG_FEC_MXC to Kconfig This converts the following to Kconfig: CONFIG_FEC_MXC Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-31 11:03:52 +08:00
CONFIG_FEC_MXC=y
ARM: imx: m53menlo: Convert MMC, USB and block to DM Enable DM block and DM MMC and DM USB support on iMX53 M53Menlo . Convert board code to match the DM support. This also enables DM pincontrol to configure the SDHI pins. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-10 00:46:44 +08:00
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX5=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
Kconfig: Migrate CONFIG_RTC_M41T62 define to Kconfig This patch moves the RTC M41T62 config define to Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-22 21:54:31 +08:00
CONFIG_RTC_M41T62=y
Convert CONFIG_MXC_UART to Kconfig This converts the following to Kconfig: CONFIG_MXC_UART Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-06-09 22:46:46 +08:00
CONFIG_MXC_UART=y
ARM: imx: m53menlo: Convert WDT support to DM Enable DM Watchdog support on iMX53 M53Menlo. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-10 00:46:45 +08:00
CONFIG_SYSRESET=y
CONFIG_SYSRESET_WATCHDOG=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_USB=y
Convert CONFIG_USB_EHCI_MX5 to Kconfig This converts the following to Kconfig: CONFIG_USB_EHCI_MX5 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-04 18:26:55 +08:00
CONFIG_USB_EHCI_MX5=y
arm: mx5: Add M53Menlo board Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-05 03:24:14 +08:00
CONFIG_USB_STORAGE=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_SMSC95XX=y
ARM: imx: m53menlo: Convert to DM VIDEO Enable DM Video support on iMX53 M53Menlo and fix minor details to restore previous behavior of the system. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-10 00:46:46 +08:00
CONFIG_DM_VIDEO=y
video: enable VIDEO_ANSI and all VIDEO_BBP options This partially reverts changes by commit 2cc393f32fd9 ("video: make BPP and ANSI configs optional") since it caused issues with other boards (missing LCD console output on pinebook, x86 platform or sandbox). Enable all disabled options again and opt out of not supported color depth in board defconfigs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Vagrant Cascadian <vagrant@debian.org>
2020-02-05 05:43:06 +08:00
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP32 is not set
ARM: imx: m53menlo: Convert to DM VIDEO Enable DM Video support on iMX53 M53Menlo and fix minor details to restore previous behavior of the system. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-10 00:46:46 +08:00
CONFIG_SYS_WHITE_ON_BLACK=y
imx: move CONFIG_VIDEO_IPUV3 to defconfigs Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-03-19 06:29:33 +08:00
CONFIG_VIDEO_IPUV3=y
Convert CONFIG_SPLASH_SCREEN et al to Kconfig This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-12 01:23:35 +08:00
CONFIG_SPLASH_SCREEN=y
CONFIG_SPLASHIMAGE_GUARD=y
CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_SPLASH_SOURCE=y
configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigs Done with: ./tools/moveconfig.py VIDEO_BMP_GZIP The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN are not activated in these defconfigs: - trats_defconfig - s5pc210_universal_defconfig - trats2_defconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-28 17:30:14 +08:00
CONFIG_VIDEO_BMP_GZIP=y
configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-28 17:30:15 +08:00
CONFIG_VIDEO_BMP_RLE8=y
configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-28 17:30:16 +08:00
CONFIG_BMP_16BPP=y
watchdog: move WATCHDOG_TIMEOUT_MSECS to Kconfig move WATCHDOG_TIMEOUT_MSECS to Kconfig and fix all board defconfigs. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-09-30 15:33:43 +08:00
CONFIG_WATCHDOG_TIMEOUT_MSECS=8000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-08 03:25:00 +08:00
CONFIG_IMX_WATCHDOG=y
Reference in New Issue Copy Permalink