mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-08 20:23:28 +08:00
Code Issues Packages Projects Releases Wiki Activity
323d3af59f
u-boot/configs/stm32mp15_basic_defconfig

150 lines
3.9 KiB
Plaintext
Raw Normal View History

board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_ARM=y
CONFIG_ARCH_STM32MP=y
config: stm32mp15: Enable STMFX support Activate PINCTRL_STMFX and needed part for generic pincontrol PINCTRL_FULL, PINCONF. Increase pre-reloc memory for MALLOC (needed for each DM pinconfig node). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-03-11 18:13:16 +08:00
CONFIG_SYS_MALLOC_F_LEN=0x3000
board: stm32mp1: move CONFIG_ENV_XXX in defconfig Move CONFIG_ENV_SECT_SIZE and CONFIG_ENV_OFFSET in stm32mp15_*_defconfig for ST board with NOR support (STM32MP15xx-EV1 boards) - CONFIG_SECT_SIZE values = the max supported NOR erase size (256KB) - CONFIG_ENV_OFFSET = offset for NOR (ENV_IS_IN_SPI_FLASH) This Patch prepares the U-Boot support of boards with STM32MP15x SOC not provided by STMicroelectronics. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-13 22:17:41 +08:00
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_ENV_OFFSET=0x280000
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL=y
stm32mp1: split board and SOC support for STM32MP15x family Split the board and SOC support for STM32MP15x family and prepare the introduction of new boards with STM32MP15x. This path define the 2 configurations: - STM32MP15x: STM32MP15x soc support (new) - TARGET_ST_STM32MP15x: STMicroelectronics board support (choice) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-13 22:17:42 +08:00
CONFIG_TARGET_ST_STM32MP15x=y
stm32mp1: add SPI flash support in SPL Allow boot from NOR with basic boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-11 17:25:54 +08:00
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
stm32mp1: configs: deactivate ARMV7_VIRT for basic boot for the moment basic and trusted configuration must start CPU in Supervisor mode and not in Hypervisor Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-31 01:16:24 +08:00
# CONFIG_ARMV7_VIRT is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-23 23:47:37 +08:00
CONFIG_SPL_TEXT_BASE=0x2FFC2500
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_DISTRO_DEFAULTS=y
stm32mp1: activated some configuration Add configuration useful for test - FIT support - MEMTEST - DFU - CACHE - TIME - TIMER Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-28 00:01:22 +08:00
CONFIG_FIT=y
stm32mp1: update bootcmd Clearly separate bootcmd for stm32mp1 board (bootcmd_stm32mp) and preboot management. That solve issue for fastboot continue command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-28 00:01:18 +08:00
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
CONFIG_SPL_I2C_SUPPORT=y
stm32mp1: add SPI flash support in SPL Allow boot from NOR with basic boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-11 17:25:54 +08:00
CONFIG_SPL_MTD_SUPPORT=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_SPL_POWER_SUPPORT=y
stm32mp1: configs: add spi load support in spl Add the boot for NOR, SPL load U-Boot.img at offset CONFIG_SYS_SPI_U_BOOT_OFFS = 0x80000. It is the start address of mtd partition ssbl in nor. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-31 01:16:36 +08:00
CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_SYS_PROMPT="STM32MP> "
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
CONFIG_CMD_MEMINFO=y
stm32mp1: activated some configuration Add configuration useful for test - FIT support - MEMTEST - DFU - CACHE - TIME - TIMER Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-28 00:01:22 +08:00
CONFIG_CMD_MEMTEST=y
configs: stm32mp15: enable ADC Enable ADC on stm32mp15. - CONFIG_CMD_ADC - CONFIG_STM32_ADC Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-24 22:31:32 +08:00
CONFIG_CMD_ADC=y
clk: stm32mp1: add debug information Add support of clk dump command and display information during probe (under CONFIG_DISPLAY_CPUINFO). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-01-30 20:07:04 +08:00
CONFIG_CMD_CLK=y
stm32mp1: activated some configuration Add configuration useful for test - FIT support - MEMTEST - DFU - CACHE - TIME - TIMER Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-28 00:01:22 +08:00
CONFIG_CMD_DFU=y
stm32mp1: add FUSE command support Add support of fuse command (read/write/program/sense) on bank 0 to access to BSEC SAFMEM (4096 OTP bits). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-17 21:24:06 +08:00
CONFIG_CMD_FUSE=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_CMD_GPIO=y
stm32mp1: add eMMC support for ED1 Add command GPT support Add EMMC boot support Add the 2 other SDMMC instances for ED1: - SDMMC2 = mmc 1, eMMC on the ED1 board - SDMMC3 = extension connector, deactivated by default Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-20 17:54:52 +08:00
CONFIG_CMD_GPT=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
stm32mp1: activate DFU support and command MTD Add support of DFU for MMC, MTD, RAM and MTD command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-10-14 15:28:08 +08:00
CONFIG_CMD_MTD=y
stm32mp1: Add remoteproc support for m4 coprocessor Alignment with kernel patch proposal for binding: [PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c https://lkml.org/lkml/2019/5/14/159 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-02 21:07:18 +08:00
CONFIG_CMD_REMOTEPROC=y
configs: stm32mp15: Enable SPI relative flags Enable STM32_SPI, SPI, DM_SPI and CMD_SPI flags. This enables the SPI support for STM32MP15. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-13 17:02:08 +08:00
CONFIG_CMD_SPI=y
configs: stm32mp15: Enable USB relative flags Enable config USB relative flags in order to enable USB EHCI, DWC2 gadget, download and mass_storage support. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-10 23:12:13 +08:00
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
stm32mp1: configs: add CONFIG_CMD_BMP Activate command BMP for splash screen support Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-31 01:16:32 +08:00
CONFIG_CMD_BMP=y
stm32mp1: activated some configuration Add configuration useful for test - FIT support - MEMTEST - DFU - CACHE - TIME - TIMER Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-28 00:01:22 +08:00
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_CMD_PMIC=y
configs: stm32mp15_basic: Set regulator relative flags Enable DM_REGULATOR_STPMU1 flag to activate regulator driver for STM32MP15 SoC and CMD_REGULATOR flag to be able to set/get regulator state int U-boot command line. Disable PMIC_CHILDREN as this flag is not needed in SPL for STM32MP1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 23:13:12 +08:00
CONFIG_CMD_REGULATOR=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_CMD_EXT4_WRITE=y
stm32mp1: activate NAND and NOR support on EV1 Add the necessary configuration to have NAND and NOR support on ev1 board for BASIC boot (with SPL) or for TRUSTED boot (with TF-A). STM32MP> nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 224 b Erase size 262144 b subpagesize 4096 b options 0x00184200 bbt options 0x00060000 STM32MP> sf probe SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-08 21:30:52 +08:00
CONFIG_CMD_MTDPARTS=y
configs: stm32mp15: Enable ENV_IS_IN_UBI Add all relative flags needed by ENV_IS_IN_UBI Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-08 00:39:22 +08:00
CONFIG_CMD_UBI=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
# CONFIG_SPL_DOS_PARTITION is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-04 03:26:12 +08:00
CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
stm32mp1: configs: Add CONFIG_OF_SPL_REMOVE_PROPS Removes unused device tree property in SPL to reduce the SPL size by 1kB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-05 23:20:20 +08:00
CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
configs: stm32mp15: Enable ENV_IS_IN_EXT4 and all relative flags Enable ENV_IS_IN_EXT4 and all relative flags to be able to load/save environment in EXT4 partition. This will allows to load/save environment on both sdcard and eMMC. As for stm32mp15, bootfs has not the same partition number on sdcard and on eMMC, we use "auto" key which allows to find the first partition in device with bootable flag which is partition 4 on sdcard and partition 2 on eMMC. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-02-16 01:04:08 +08:00
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_EXT4=y
configs: stm32mp15: Enable ENV_IS_SPI_FLASH Add all relative flags needed by ENV_IS_IN_SPI_FLASH Reserved a 256KB partition in NOR to save the U-Boot environment. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-01-24 18:33:29 +08:00
CONFIG_ENV_IS_IN_SPI_FLASH=y
configs: stm32mp15: Enable ENV_IS_IN_UBI Add all relative flags needed by ENV_IS_IN_UBI Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-08 00:39:22 +08:00
CONFIG_ENV_IS_IN_UBI=y
defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-11 00:28:03 +08:00
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
configs: stm32mp15: Enable ENV_IS_IN_EXT4 and all relative flags Enable ENV_IS_IN_EXT4 and all relative flags to be able to load/save environment in EXT4 partition. This will allows to load/save environment on both sdcard and eMMC. As for stm32mp15, bootfs has not the same partition number on sdcard and on eMMC, we use "auto" key which allows to find the first partition in device with bootable flag which is partition 4 on sdcard and partition 2 on eMMC. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-02-16 01:04:08 +08:00
CONFIG_ENV_EXT4_INTERFACE="mmc"
CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto"
CONFIG_ENV_EXT4_FILE="/uboot.env"
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 09:02:10 +08:00
CONFIG_ENV_OFFSET_REDUND=0x2C0000
configs: stm32mp15: Enable ENV_IS_IN_UBI Add all relative flags needed by ENV_IS_IN_UBI Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-08 00:39:22 +08:00
CONFIG_ENV_UBI_PART="UBI"
CONFIG_ENV_UBI_VOLUME="uboot_config"
env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND Introduce the KConfig option CONFIG_ENV_UBI_VOLUME_REDUND for defining the name of the UBI volume used to store the redundant environment. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> hs: get rid of stm32mp1* build errors
2019-05-15 21:15:53 +08:00
CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r"
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 11:46:36 +08:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
configs: stm32mp15: enable ADC Enable ADC on stm32mp15. - CONFIG_CMD_ADC - CONFIG_STM32_ADC Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-24 22:31:32 +08:00
CONFIG_STM32_ADC=y
stm32mp1: activate DFU support and command MTD Add support of DFU for MMC, MTD, RAM and MTD command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-10-14 15:28:08 +08:00
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_DFU_MTD=y
stm32mp1: add support for virtual partition read Add read for OTP and PMIC NVM with alternates on virtual DFU device. Serie-cc: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-14 15:28:12 +08:00
CONFIG_DFU_VIRT=y
stm32mp1: activate FASTBOOT on eMMC activate Fastboot for eMMC on EV1 board (mmc1) $> sudo apt-get install android-tools-adb android-tools-fastboot $> fastboot -i 0x0483 getvar bootloader-version Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-28 00:01:19 +08:00
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
CONFIG_FASTBOOT_BUF_SIZE=0x02000000
CONFIG_FASTBOOT_USB_DEV=1
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=1
hwspinlock: add stm32 hardware spinlock support Implement hardware spinlock support for STM32MP1. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-11-27 20:49:52 +08:00
CONFIG_DM_HWSPINLOCK=y
CONFIG_HWSPINLOCK_STM32=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_STM32F7=y
stm32mp1: add gpio led support This patch add the 4 LED available on the ED1 board and activated gpio led driver. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-27 22:37:05 +08:00
CONFIG_LED=y
CONFIG_LED_GPIO=y
configs: stm32mp15: enable IPCC mailbox Activate the ipcc mailbox for stm32mp15 configs. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-14 17:20:36 +08:00
CONFIG_DM_MAILBOX=y
CONFIG_STM32_IPCC=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_DM_MMC=y
Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-05-01 15:58:27 +08:00
CONFIG_SUPPORT_EMMC_BOOT=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_STM32_SDMMC2=y
mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flash Both symbols must be enabled when there is a raw NAND driver selected. Also enable them when CONFIG_CMD_NAND is selected to avoid breaking things when we'll further rework the MTD dependency description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Rebase and migrate a few more boards here] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04 01:50:07 +08:00
CONFIG_MTD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-05 06:18:38 +08:00
CONFIG_DM_MTD=y
mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-04 01:50:03 +08:00
CONFIG_MTD_RAW_NAND=y
stm32mp1: activate NAND and NOR support on EV1 Add the necessary configuration to have NAND and NOR support on ev1 board for BASIC boot (with SPL) or for TRUSTED boot (with TF-A). STM32MP> nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 224 b Erase size 262144 b subpagesize 4096 b options 0x00184200 bbt options 0x00060000 STM32MP> sf probe SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-08 21:30:52 +08:00
CONFIG_NAND_STM32_FMC2=y
stm32mp1: configs: activate CONFIG_MTD_SPI_NAND Activate the support of SPI NAND in stm32mp1 U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-10-14 15:28:10 +08:00
CONFIG_MTD_SPI_NAND=y
stm32mp1: activate NAND and NOR support on EV1 Add the necessary configuration to have NAND and NOR support on ev1 board for BASIC boot (with SPL) or for TRUSTED boot (with TF-A). STM32MP> nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 224 b Erase size 262144 b subpagesize 4096 b options 0x00184200 bbt options 0x00060000 STM32MP> sf probe SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-08 21:30:52 +08:00
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_SPI_FLASH_MTD=y
stm32mp1: configs: Add CONFIG_SPL_SPI_FLASH_MTD As SPI_FLASH_MTD is used in SPL and U-Boot proper, we enable both, now that a separate option for SPL was introduced. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> [jagan: drop unrelated change] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-23 02:07:43 +08:00
CONFIG_SPL_SPI_FLASH_MTD=y
configs: stm32mp15: Enable Ethernet feature This allows to enable Ethernet and use driver for Synopsys Ethernet QoS device Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-17 21:08:47 +08:00
CONFIG_DM_ETH=y
CONFIG_DWC_ETH_QOS=y
configs: stm32mp15: Enable USB relative flags Enable config USB relative flags in order to enable USB EHCI, DWC2 gadget, download and mass_storage support. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-10 23:12:13 +08:00
CONFIG_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
config: stm32mp15: Enable STMFX support Activate PINCTRL_STMFX and needed part for generic pincontrol PINCTRL_FULL, PINCONF. Increase pre-reloc memory for MALLOC (needed for each DM pinconfig node). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-03-11 18:13:16 +08:00
CONFIG_PINCONF=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
# CONFIG_SPL_PINCTRL_FULL is not set
config: stm32mp15: Enable STMFX support Activate PINCTRL_STMFX and needed part for generic pincontrol PINCTRL_FULL, PINCONF. Increase pre-reloc memory for MALLOC (needed for each DM pinconfig node). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-03-11 18:13:16 +08:00
CONFIG_PINCTRL_STMFX=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 17:46:18 +08:00
CONFIG_DM_PMIC=y
configs: stm32mp15_basic: Set regulator relative flags Enable DM_REGULATOR_STPMU1 flag to activate regulator driver for STM32MP15 SoC and CMD_REGULATOR flag to be able to set/get regulator state int U-boot command line. Disable PMIC_CHILDREN as this flag is not needed in SPL for STM32MP1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 23:13:12 +08:00
# CONFIG_SPL_PMIC_CHILDREN is not set
power: rename stpmu1 to official name stpmic1 Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-04 18:26:17 +08:00
CONFIG_PMIC_STPMIC1=y
stm32mp1: activate FIXED regulator Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-09 21:17:23 +08:00
CONFIG_DM_REGULATOR_FIXED=y
configs: stm32mp15_basic: Set regulator relative flags Enable DM_REGULATOR_STPMU1 flag to activate regulator driver for STM32MP15 SoC and CMD_REGULATOR flag to be able to set/get regulator state int U-boot command line. Disable PMIC_CHILDREN as this flag is not needed in SPL for STM32MP1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 23:13:12 +08:00
CONFIG_DM_REGULATOR_GPIO=y
configs: stm32mp15: Enable STM32_VREFBUF flag Enable vrefbuf on stm32mp15, to be used by ADC. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 23:00:48 +08:00
CONFIG_DM_REGULATOR_STM32_VREFBUF=y
power: rename stpmu1 to official name stpmic1 Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-04 18:26:17 +08:00
CONFIG_DM_REGULATOR_STPMIC1=y
configs: stm32mp15: enable stm32 remoteproc Activate the remote processor support for stm32mp15 configs. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-22 17:04:31 +08:00
CONFIG_REMOTEPROC_STM32_COPRO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-23 02:38:00 +08:00
CONFIG_DM_RNG=y
CONFIG_RNG_STM32MP1=y
rtc: Add rtc driver for stm32mp1 Add support of STM32MP1 rtc driver. Enable it for basic and trusted configurations. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
2019-07-22 17:02:34 +08:00
CONFIG_DM_RTC=y
CONFIG_RTC_STM32=y
stm32mp1: activate serial rx buffer Activate the serial rx buffer. Prepare console MUX activation with vidconsole, and avoid console performance issue (missing character for copy-paste). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-08-03 19:38:42 +08:00
CONFIG_SERIAL_RX_BUFFER=y
stm32mp1: activate NAND and NOR support on EV1 Add the necessary configuration to have NAND and NOR support on ev1 board for BASIC boot (with SPL) or for TRUSTED boot (with TF-A). STM32MP> nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 224 b Erase size 262144 b subpagesize 4096 b options 0x00184200 bbt options 0x00060000 STM32MP> sf probe SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-08 21:30:52 +08:00
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_STM32_QSPI=y
configs: stm32mp15: Enable SPI relative flags Enable STM32_SPI, SPI, DM_SPI and CMD_SPI flags. This enables the SPI support for STM32MP15. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-13 17:02:08 +08:00
CONFIG_STM32_SPI=y
configs: stm32mp15: Enable USB relative flags Enable config USB relative flags in order to enable USB EHCI, DWC2 gadget, download and mass_storage support. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-10 23:12:13 +08:00
CONFIG_USB=y
CONFIG_DM_USB=y
stm32mp1: migrate USBOTG device to driver model Use the DWC2 device driver with DM_USB_GADGET support and cleanup the USB support in STM32MP1 board. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-29 22:42:23 +08:00
CONFIG_DM_USB_GADGET=y
configs: stm32mp15: Enable USB relative flags Enable config USB relative flags in order to enable USB EHCI, DWC2 gadget, download and mass_storage support. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-10 23:12:13 +08:00
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
CONFIG_USB_GADGET_VENDOR_NUM=0x0483
CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
CONFIG_USB_GADGET_DWC2_OTG=y
stm32mp1: configs: add CONFIG_DM_VIDEO Activate command DM_VIDEO for LCD support Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-31 01:16:30 +08:00
CONFIG_DM_VIDEO=y
stm32mp1: configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-12-18 17:12:59 +08:00
CONFIG_BACKLIGHT_GPIO=y
video: make BPP and ANSI configs optional Many boards do not use all selected framebuffer depth configurations, for such boards there is some unused code in video and console uclass routines. Make depth specific code optional to avoid dead code and slightly reduce binary size. Also make ANSI code optional for the same reason. When i.e. using only VIDEO_BPP16 the code size shrinks (below values when using gcc-7.3.0): $ ./tools/buildman/buildman -b video-wip -sS wandboard ... 01: Merge git://git.denx.de/u-boot-sh 02: video: add guards around 16bpp/32bbp code 03: video: make BPP and ANSI configs optional arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0 Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> Tested-by: Patrice Chotard <patrice.chotard@st.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-12-04 22:48:54 +08:00
CONFIG_VIDEO_BPP8=y
CONFIG_VIDEO_BPP16=y
CONFIG_VIDEO_BPP32=y
stm32mp1: configs: add display devices Add support of panels otm8009A, RM68200 & DSI controller. Limit resolution to 1280x800. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-07 21:29:15 +08:00
CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
CONFIG_VIDEO_STM32=y
CONFIG_VIDEO_STM32_DSI=y
CONFIG_VIDEO_STM32_MAX_XRES=1280
CONFIG_VIDEO_STM32_MAX_YRES=800
stm32mp1: activate OF_BOARD_SETUP and FDT_FIXUP_PARTITIONS Update kernel MTD partition in device tree with U-Boot information. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-02 19:26:07 +08:00
CONFIG_FDT_FIXUP_PARTITIONS=y
Reference in New Issue Copy Permalink