2002-11-03 08:38:21 +08:00
|
|
|
/*
|
|
|
|
|
* (C) Copyright 2000
|
|
|
|
|
* Murray Jensen <Murray.Jensen@cmst.csiro.au>
|
|
|
|
|
*
|
|
|
|
|
* (C) Copyright 2000
|
|
|
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
|
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
|
|
|
*
|
|
|
|
|
* (C) Copyright 2001
|
|
|
|
|
* Advent Networks, Inc. <http://www.adventnetworks.com>
|
|
|
|
|
* Jay Monkman <jtm@smoothsmoothie.com>
|
|
|
|
|
*
|
|
|
|
|
* Configuation settings for the WindRiver PPMC8260 board.
|
|
|
|
|
*
|
|
|
|
|
* See file CREDITS for list of people who contributed to this
|
|
|
|
|
* project.
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
|
* published by the Free Software Foundation; either version 2 of
|
|
|
|
|
* the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef __CONFIG_H
|
|
|
|
|
#define __CONFIG_H
|
|
|
|
|
|
|
|
|
|
/*****************************************************************************
|
|
|
|
|
*
|
|
|
|
|
* These settings must match the way _your_ board is set up
|
|
|
|
|
*
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
|
|
|
|
|
/* What is the oscillator's (UX2) frequency in Hz? */
|
|
|
|
|
#define CONFIG_8260_CLKIN (66 * 1000 * 1000)
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* MODCK_H & MODCLK[1-3] - Ref: Section 9.2 in MPC8206 User Manual
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
* What should MODCK_H be? It is dependent on the oscillator
|
|
|
|
|
* frequency, MODCK[1-3], and desired CPM and core frequencies.
|
|
|
|
|
* Here are some example values (all frequencies are in MHz):
|
|
|
|
|
*
|
|
|
|
|
* MODCK_H MODCK[1-3] Osc CPM Core S2-6 S2-7 S2-8
|
|
|
|
|
* ------- ---------- --- --- ---- ----- ----- -----
|
|
|
|
|
* 0x2 0x2 33 133 133 Close Open Close
|
|
|
|
|
* 0x2 0x3 33 133 166 Close Open Open
|
|
|
|
|
* 0x2 0x4 33 133 200 Open Close Close
|
|
|
|
|
* 0x2 0x5 33 133 233 Open Close Open
|
|
|
|
|
* 0x2 0x6 33 133 266 Open Open Close
|
|
|
|
|
*
|
|
|
|
|
* 0x5 0x5 66 133 133 Open Close Open
|
|
|
|
|
* 0x5 0x6 66 133 166 Open Open Close
|
|
|
|
|
* 0x5 0x7 66 133 200 Open Open Open
|
|
|
|
|
* 0x6 0x0 66 133 233 Close Close Close
|
|
|
|
|
* 0x6 0x1 66 133 266 Close Close Open
|
|
|
|
|
* 0x6 0x2 66 133 300 Close Open Close
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_PPMC_MODCK_H 0x05
|
|
|
|
|
|
|
|
|
|
/* Define this if you want to boot from 0x00000100. If you don't define
|
|
|
|
|
* this, you will need to program the bootloader to 0xfff00000, and
|
|
|
|
|
* get the hardware reset config words at 0xfe000000. The simplest
|
|
|
|
|
* way to do that is to program the bootloader at both addresses.
|
|
|
|
|
* It is suggested that you just let U-Boot live at 0x00000000.
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_PPMC_BOOT_LOW 1
|
|
|
|
|
|
|
|
|
|
/* What should the base address of the main FLASH be and how big is
|
|
|
|
|
* it (in MBytes)? This must contain TEXT_BASE from board/ppmc8260/config.mk
|
|
|
|
|
* The main FLASH is whichever is connected to *CS0. U-Boot expects
|
|
|
|
|
* this to be the SIMM.
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_FLASH0_BASE 0xFE000000
|
|
|
|
|
#define CFG_FLASH0_SIZE 16
|
|
|
|
|
|
|
|
|
|
/* What should be the base address of the first SDRAM DIMM and how big is
|
|
|
|
|
* it (in Mbytes)?
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_SDRAM0_BASE 0x00000000
|
|
|
|
|
#define CFG_SDRAM0_SIZE 128
|
|
|
|
|
|
|
|
|
|
/* What should be the base address of the second SDRAM DIMM and how big is
|
|
|
|
|
* it (in Mbytes)?
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_SDRAM1_BASE 0x08000000
|
|
|
|
|
#define CFG_SDRAM1_SIZE 128
|
|
|
|
|
|
|
|
|
|
/* What should be the base address of the on board SDRAM and how big is
|
|
|
|
|
* it (in Mbytes)?
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_SDRAM2_BASE 0x38000000
|
|
|
|
|
#define CFG_SDRAM2_SIZE 16
|
|
|
|
|
|
|
|
|
|
/* What should be the base address of the MAILBOX and how big is it
|
|
|
|
|
* (in Bytes)
|
|
|
|
|
* The eeprom lives at CFG_MAILBOX_BASE + 0x80000000
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_MAILBOX_BASE 0x32000000
|
|
|
|
|
#define CFG_MAILBOX_SIZE 8192
|
|
|
|
|
|
|
|
|
|
/* What is the base address of the I/O select lines and how big is it
|
|
|
|
|
* (In Mbytes)?
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define CFG_IOSELECT_BASE 0xE0000000
|
|
|
|
|
#define CFG_IOSELECT_SIZE 32
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* What should be the base address of the LEDs and switch S0?
|
|
|
|
|
* If you don't want them enabled, don't define this.
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_LED_BASE 0xF1000000
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* PPMC8260 with 256 16 MB DIMM:
|
|
|
|
|
*
|
|
|
|
|
* 0x0000 0000 Exception Vector code, 8k
|
|
|
|
|
* :
|
|
|
|
|
* 0x0000 1FFF
|
|
|
|
|
* 0x0000 2000 Free for Application Use
|
|
|
|
|
* :
|
|
|
|
|
* :
|
|
|
|
|
*
|
|
|
|
|
* :
|
|
|
|
|
* :
|
|
|
|
|
* 0x0FF5 FF30 Monitor Stack (Growing downward)
|
|
|
|
|
* Monitor Stack Buffer (0x80)
|
|
|
|
|
* 0x0FF5 FFB0 Board Info Data
|
|
|
|
|
* 0x0FF6 0000 Malloc Arena
|
|
|
|
|
* : CFG_ENV_SECT_SIZE, 256k
|
|
|
|
|
* : CFG_MALLOC_LEN, 128k
|
|
|
|
|
* 0x0FFC 0000 RAM Copy of Monitor Code
|
|
|
|
|
* : CFG_MONITOR_LEN, 256k
|
|
|
|
|
* 0x0FFF FFFF [End of RAM], CFG_SDRAM_SIZE - 1
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* select serial console configuration
|
|
|
|
|
*
|
|
|
|
|
* if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
|
|
|
|
|
* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
|
|
|
|
|
* for SCC).
|
|
|
|
|
*
|
|
|
|
|
* if CONFIG_CONS_NONE is defined, then the serial console routines must
|
|
|
|
|
* defined elsewhere.
|
|
|
|
|
* The console can be on SMC1 or SMC2
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_CONS_ON_SMC 1 /* define if console on SMC */
|
|
|
|
|
#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
|
|
|
|
|
#undef CONFIG_CONS_NONE /* define if console on neither */
|
|
|
|
|
#define CONFIG_CONS_INDEX 1 /* which SMC/SCC channel for console */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* select ethernet configuration
|
|
|
|
|
*
|
|
|
|
|
* if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
|
|
|
|
|
* CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
|
|
|
|
|
* for FCC)
|
|
|
|
|
*
|
|
|
|
|
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
|
|
|
|
|
* defined elsewhere (as for the console), or CFG_CMD_NET must be removed
|
|
|
|
|
* from CONFIG_COMMANDS to remove support for networking.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
|
|
|
|
|
#define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */
|
|
|
|
|
#undef CONFIG_ETHER_NONE /* define if ethernet on neither */
|
|
|
|
|
#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */
|
|
|
|
|
#define CONFIG_MII /* MII PHY management */
|
|
|
|
|
#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
|
|
|
|
|
/*
|
|
|
|
|
* Port pins used for bit-banged MII communictions (if applicable).
|
|
|
|
|
*/
|
|
|
|
|
#define MDIO_PORT 2 /* Port C */
|
|
|
|
|
#define MDIO_ACTIVE (iop->pdir |= 0x00400000)
|
|
|
|
|
#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
|
|
|
|
|
#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
|
|
|
|
|
|
|
|
|
|
#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
|
|
|
|
|
else iop->pdat &= ~0x00400000
|
|
|
|
|
|
|
|
|
|
#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
|
|
|
|
|
else iop->pdat &= ~0x00200000
|
|
|
|
|
|
|
|
|
|
#define MIIDELAY udelay(1)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Define this to reserve an entire FLASH sector (256 KB) for
|
|
|
|
|
* environment variables. Otherwise, the environment will be
|
|
|
|
|
* put in the same sector as U-Boot, and changing variables
|
|
|
|
|
* will erase U-Boot temporarily
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_ENV_IN_OWN_SECT 1
|
|
|
|
|
|
|
|
|
|
/* Define to allow the user to overwrite serial and ethaddr */
|
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
|
|
|
|
|
|
/* What should the console's baud rate be? */
|
|
|
|
|
#define CONFIG_BAUDRATE 9600
|
|
|
|
|
|
|
|
|
|
/* Ethernet MAC address */
|
|
|
|
|
|
|
|
|
|
#define CONFIG_ETHADDR 00:a0:1e:90:2b:00
|
|
|
|
|
|
|
|
|
|
/* Define this to set the last octet of the ethernet address
|
|
|
|
|
* from the DS0-DS7 switch and light the leds with the result
|
|
|
|
|
* The DS0-DS7 switch and the leds are backwards with respect
|
|
|
|
|
* to each other. DS7 is on the board edge side of both the
|
|
|
|
|
* led strip and the DS0-DS7 switch.
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
|
|
|
|
|
|
/* Set to a positive value to delay for running BOOTCOMMAND */
|
|
|
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
|
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
|
/* Be selective on what keys can delay or stop the autoboot process
|
|
|
|
|
* To stop use: " "
|
|
|
|
|
*/
|
|
|
|
|
# define CONFIG_AUTOBOOT_KEYED
|
|
|
|
|
# define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n"
|
|
|
|
|
# define CONFIG_AUTOBOOT_STOP_STR " "
|
|
|
|
|
# undef CONFIG_AUTOBOOT_DELAY_STR
|
|
|
|
|
# define DEBUG_BOOTKEYS 0
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Define a command string that is automatically executed when no character
|
|
|
|
|
* is read on the console interface withing "Boot Delay" after reset.
|
|
|
|
|
*/
|
2004-03-25 23:14:43 +08:00
|
|
|
#undef CONFIG_BOOT_ROOT_INITRD /* Use ram disk for the root file system */
|
|
|
|
|
#define CONFIG_BOOT_ROOT_NFS /* Use a NFS mounted root file system */
|
2002-11-03 08:38:21 +08:00
|
|
|
|
2004-03-15 06:25:36 +08:00
|
|
|
#ifdef CONFIG_BOOT_ROOT_INITRD
|
2002-11-03 08:38:21 +08:00
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
|
|
|
"version;" \
|
|
|
|
|
"echo;" \
|
|
|
|
|
"bootp;" \
|
|
|
|
|
"setenv bootargs root=/dev/ram0 rw " \
|
2005-11-21 04:40:11 +08:00
|
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
|
2002-11-03 08:38:21 +08:00
|
|
|
"bootm"
|
|
|
|
|
#endif /* CONFIG_BOOT_ROOT_INITRD */
|
|
|
|
|
|
2004-03-15 06:25:36 +08:00
|
|
|
#ifdef CONFIG_BOOT_ROOT_NFS
|
2002-11-03 08:38:21 +08:00
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
|
|
|
"version;" \
|
|
|
|
|
"echo;" \
|
|
|
|
|
"bootp;" \
|
2005-11-21 04:40:11 +08:00
|
|
|
"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
|
|
|
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
|
2002-11-03 08:38:21 +08:00
|
|
|
"bootm"
|
|
|
|
|
#endif /* CONFIG_BOOT_ROOT_NFS */
|
|
|
|
|
|
|
|
|
|
/* Add support for a few extra bootp options like:
|
|
|
|
|
* - File size
|
|
|
|
|
* - DNS
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
|
|
|
|
|
CONFIG_BOOTP_BOOTFILESIZE | \
|
|
|
|
|
CONFIG_BOOTP_DNS)
|
|
|
|
|
|
|
|
|
|
/* undef this to save memory */
|
|
|
|
|
#define CFG_LONGHELP
|
|
|
|
|
|
|
|
|
|
/* Monitor Command Prompt */
|
|
|
|
|
#define CFG_PROMPT "=> "
|
|
|
|
|
|
|
|
|
|
/* What U-Boot subsytems do you want enabled? */
|
|
|
|
|
#define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
|
|
|
|
|
CFG_CMD_ELF | \
|
|
|
|
|
CFG_CMD_ASKENV | \
|
|
|
|
|
CFG_CMD_ECHO | \
|
|
|
|
|
CFG_CMD_REGINFO | \
|
|
|
|
|
CFG_CMD_MEMTEST | \
|
|
|
|
|
CFG_CMD_MII | \
|
|
|
|
|
CFG_CMD_IMMAP)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Where do the internal registers live? */
|
|
|
|
|
#define CFG_IMMR 0xf0000000
|
|
|
|
|
|
|
|
|
|
/*****************************************************************************
|
|
|
|
|
*
|
|
|
|
|
* You should not have to modify any of the following settings
|
|
|
|
|
*
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
|
|
|
|
|
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
|
|
|
|
|
#define CONFIG_PPMC8260 1 /* on an Wind River PPMC8260 Board */
|
2005-07-23 23:37:35 +08:00
|
|
|
#define CONFIG_CPM2 1 /* Has a CPM2 */
|
2002-11-03 08:38:21 +08:00
|
|
|
|
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
|
|
|
#include <cmd_confdefs.h>
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Miscellaneous configurable options
|
|
|
|
|
*/
|
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
|
|
|
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
|
|
|
#else
|
|
|
|
|
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Print Buffer Size */
|
|
|
|
|
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
|
|
|
|
|
|
|
|
|
|
#define CFG_MAXARGS 32 /* max number of command args */
|
|
|
|
|
|
|
|
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
|
|
|
|
|
|
#define CFG_LOAD_ADDR 0x140000 /* default load address */
|
|
|
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
|
|
|
|
|
|
#define CFG_MEMTEST_START 0x2000 /* memtest works from the end of */
|
|
|
|
|
/* the exception vector table */
|
|
|
|
|
/* to the end of the DRAM */
|
|
|
|
|
/* less monitor and malloc area */
|
|
|
|
|
#define CFG_STACK_USAGE 0x10000 /* Reserve 64k for the stack usage */
|
|
|
|
|
#define CFG_MEM_END_USAGE ( CFG_MONITOR_LEN \
|
|
|
|
|
+ CFG_MALLOC_LEN \
|
|
|
|
|
+ CFG_ENV_SECT_SIZE \
|
|
|
|
|
+ CFG_STACK_USAGE )
|
|
|
|
|
|
|
|
|
|
#define CFG_MEMTEST_END ( CFG_SDRAM_SIZE * 1024 * 1024 \
|
|
|
|
|
- CFG_MEM_END_USAGE )
|
|
|
|
|
|
|
|
|
|
/* valid baudrates */
|
|
|
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Low Level Configuration Settings
|
|
|
|
|
* (address mappings, register initial values, etc.)
|
|
|
|
|
* You should know what you are doing if you make changes here.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_ETHER_ON_SCC) && (CONFIG_ETHER_INDEX == 1)
|
|
|
|
|
/*
|
|
|
|
|
* Attention: This is board specific
|
|
|
|
|
* - RX clk is CLK11
|
|
|
|
|
* - TX clk is CLK12
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_CMXSCR_VALUE (CMXSCR_RS1CS_CLK11 |\
|
|
|
|
|
CMXSCR_TS1CS_CLK12)
|
|
|
|
|
|
|
|
|
|
#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
|
|
|
|
|
/*
|
|
|
|
|
* Attention: this is board-specific
|
|
|
|
|
* - Rx-CLK is CLK13
|
|
|
|
|
* - Tx-CLK is CLK14
|
|
|
|
|
* - Select bus for bd/buffers (see 28-13)
|
|
|
|
|
* - Enable Full Duplex in FSMR
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_CMXFCR_MASK (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
|
|
|
|
|
#define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
|
|
|
|
|
#define CFG_CPMFCR_RAMTYPE 0
|
|
|
|
|
#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
|
|
|
|
|
#endif /* CONFIG_ETHER_INDEX */
|
|
|
|
|
|
|
|
|
|
#define CFG_FLASH_BASE CFG_FLASH0_BASE
|
|
|
|
|
#define CFG_FLASH_SIZE CFG_FLASH0_SIZE
|
|
|
|
|
#define CFG_SDRAM_BASE CFG_SDRAM0_BASE
|
|
|
|
|
#define CFG_SDRAM_SIZE (CFG_SDRAM0_SIZE + CFG_SDRAM1_SIZE)
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* Hard Reset Configuration Words
|
|
|
|
|
*/
|
|
|
|
|
#if defined(CFG_PPMC_BOOT_LOW)
|
|
|
|
|
# define CFG_PPMC_HRCW_BOOT_FLAGS (HRCW_CIP | HRCW_BMS)
|
|
|
|
|
#else
|
|
|
|
|
# define CFG_PPMC_HRCW_BOOT_FLAGS (0)
|
|
|
|
|
#endif /* defined(CFG_PPMC_BOOT_LOW) */
|
|
|
|
|
|
|
|
|
|
/* get the HRCW ISB field from CFG_IMMR */
|
|
|
|
|
#define CFG_PPMC_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) | \
|
|
|
|
|
((CFG_IMMR & 0x01000000) >> 7) | \
|
|
|
|
|
((CFG_IMMR & 0x00100000) >> 4) )
|
|
|
|
|
|
|
|
|
|
#define CFG_HRCW_MASTER ( HRCW_EBM | \
|
|
|
|
|
HRCW_BPS11 | \
|
|
|
|
|
HRCW_L2CPC10 | \
|
|
|
|
|
HRCW_DPPC00 | \
|
|
|
|
|
CFG_PPMC_HRCW_IMMR | \
|
|
|
|
|
HRCW_MMR00 | \
|
|
|
|
|
HRCW_LBPC00 | \
|
|
|
|
|
HRCW_APPC10 | \
|
|
|
|
|
HRCW_CS10PC00 | \
|
|
|
|
|
(CFG_PPMC_MODCK_H & HRCW_MODCK_H1111) | \
|
|
|
|
|
CFG_PPMC_HRCW_BOOT_FLAGS )
|
|
|
|
|
|
|
|
|
|
/* no slaves */
|
|
|
|
|
#define CFG_HRCW_SLAVE1 0
|
|
|
|
|
#define CFG_HRCW_SLAVE2 0
|
|
|
|
|
#define CFG_HRCW_SLAVE3 0
|
|
|
|
|
#define CFG_HRCW_SLAVE4 0
|
|
|
|
|
#define CFG_HRCW_SLAVE5 0
|
|
|
|
|
#define CFG_HRCW_SLAVE6 0
|
|
|
|
|
#define CFG_HRCW_SLAVE7 0
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_INIT_RAM_ADDR CFG_IMMR
|
|
|
|
|
#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
|
|
|
|
|
#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */
|
|
|
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
|
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* Start addresses for the final memory configuration
|
|
|
|
|
* (Set up by the startup code)
|
|
|
|
|
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
|
|
|
|
* Note also that the logic that sets CFG_RAMBOOT is platform dependent.
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_MONITOR_BASE CFG_FLASH0_BASE
|
|
|
|
|
|
|
|
|
|
#ifndef CFG_MONITOR_BASE
|
|
|
|
|
#define CFG_MONITOR_BASE 0x0ff80000
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
|
|
|
|
# define CFG_RAMBOOT
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 374 kB for Monitor */
|
|
|
|
|
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* For booting Linux, the board info and command line data
|
|
|
|
|
* have to be in the first 8 MB of memory, since this is
|
|
|
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* FLASH and environment organization
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
|
2004-02-12 08:47:09 +08:00
|
|
|
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
|
2002-11-03 08:38:21 +08:00
|
|
|
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
|
|
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
|
|
|
#define CFG_FLASH_INCREMENT 0 /* there is only one bank */
|
|
|
|
|
#define CFG_FLASH_PROTECTION 1 /* use hardware protection */
|
|
|
|
|
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#ifndef CFG_RAMBOOT
|
|
|
|
|
|
|
|
|
|
# define CFG_ENV_IS_IN_FLASH 1
|
|
|
|
|
# ifdef CFG_ENV_IN_OWN_SECT
|
|
|
|
|
# define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
|
|
|
|
|
# define CFG_ENV_SECT_SIZE 0x40000
|
|
|
|
|
# else
|
|
|
|
|
# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
|
|
|
|
|
# define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
|
|
|
|
|
# define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */
|
|
|
|
|
# endif /* CFG_ENV_IN_OWN_SECT */
|
|
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
# define CFG_ENV_IS_IN_FLASH 1
|
|
|
|
|
# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x40000)
|
|
|
|
|
#define CFG_ENV_SIZE 0x1000
|
|
|
|
|
# define CFG_ENV_SECT_SIZE 0x40000
|
|
|
|
|
#endif /* CFG_RAMBOOT */
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* Cache Configuration
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
|
|
|
|
|
|
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
|
|
|
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* HIDx - Hardware Implementation-dependent Registers 2-11
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
* HID0 also contains cache control - initially enable both caches and
|
|
|
|
|
* invalidate contents, then the final state leaves only the instruction
|
|
|
|
|
* cache enabled. Note that Power-On and Hard reset invalidate the caches,
|
|
|
|
|
* but Soft reset does not.
|
|
|
|
|
*
|
|
|
|
|
* HID1 has only read-only information - nothing to set.
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_HID0_INIT (HID0_ICE |\
|
|
|
|
|
HID0_DCE |\
|
|
|
|
|
HID0_ICFI |\
|
|
|
|
|
HID0_DCI |\
|
|
|
|
|
HID0_IFEM |\
|
|
|
|
|
HID0_ABE)
|
|
|
|
|
|
|
|
|
|
#define CFG_HID0_FINAL (HID0_ICE |\
|
|
|
|
|
HID0_IFEM |\
|
|
|
|
|
HID0_ABE |\
|
|
|
|
|
HID0_EMCP)
|
|
|
|
|
#define CFG_HID2 0
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* RMR - Reset Mode Register
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_RMR 0
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* BCR - Bus Configuration 4-25
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_BCR (BCR_EBM |\
|
|
|
|
|
0x30000000)
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* SIUMCR - SIU Module Configuration 4-31
|
|
|
|
|
* Ref Section 4.3.2.6 page 4-31
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define CFG_SIUMCR (SIUMCR_ESE |\
|
|
|
|
|
SIUMCR_DPPC00 |\
|
|
|
|
|
SIUMCR_L2CPC10 |\
|
|
|
|
|
SIUMCR_LBPC00 |\
|
|
|
|
|
SIUMCR_APPC10 |\
|
|
|
|
|
SIUMCR_CS10PC00 |\
|
|
|
|
|
SIUMCR_BCTLC00 |\
|
|
|
|
|
SIUMCR_MMR00)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* SYPCR - System Protection Control 11-9
|
|
|
|
|
* SYPCR can only be written once after reset!
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
* Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_SYPCR (SYPCR_SWTC |\
|
|
|
|
|
SYPCR_BMT |\
|
|
|
|
|
SYPCR_PBME |\
|
|
|
|
|
SYPCR_LBME |\
|
|
|
|
|
SYPCR_SWRI |\
|
|
|
|
|
SYPCR_SWP)
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* TMCNTSC - Time Counter Status and Control 4-40
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
* Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
|
|
|
|
|
* and enable Time Counter
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_TMCNTSC (TMCNTSC_SEC |\
|
|
|
|
|
TMCNTSC_ALR |\
|
|
|
|
|
TMCNTSC_TCF |\
|
|
|
|
|
TMCNTSC_TCE)
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* PISCR - Periodic Interrupt Status and Control 4-42
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
* Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
|
|
|
|
|
* Periodic timer
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_PISCR (PISCR_PS |\
|
|
|
|
|
PISCR_PTF |\
|
|
|
|
|
PISCR_PTE)
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* SCCR - System Clock Control 9-8
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_SCCR 0
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* RCCR - RISC Controller Configuration 13-7
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_RCCR 0
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Initialize Memory Controller:
|
|
|
|
|
*
|
|
|
|
|
* Bank Bus Machine PortSz Device
|
|
|
|
|
* ---- --- ------- ------ ------
|
|
|
|
|
* 0 60x GPCM 32 bit FLASH (SIMM - 32MB) *
|
|
|
|
|
* 1 unused
|
|
|
|
|
* 2 60x SDRAM 64 bit SDRAM (DIMM - 128MB)
|
|
|
|
|
* 3 60x SDRAM 64 bit SDRAM (DIMM - 128MB)
|
|
|
|
|
* 4 Local SDRAM 32 bit SDRAM (on board - 16MB)
|
|
|
|
|
* 5 60x GPCM 8 bit Mailbox/EEPROM (8KB)
|
|
|
|
|
* 6 60x GPCM 8 bit FLASH (on board - 2MB) *
|
|
|
|
|
* 7 60x GPCM 8 bit LEDs, switches
|
|
|
|
|
*
|
|
|
|
|
* (*) This configuration requires the PPMC8260 be configured
|
|
|
|
|
* so that *CS0 goes to the FLASH SIMM, and *CS6 goes to
|
|
|
|
|
* the on board FLASH. In other words, JP24 should have
|
|
|
|
|
* pins 1 and 2 jumpered and pins 3 and 4 jumpered.
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* BR0,BR1 - Base Register
|
|
|
|
|
* Ref: Section 10.3.1 on page 10-14
|
|
|
|
|
* OR0,OR1 - Option Register
|
|
|
|
|
* Ref: Section 10.3.2 on page 10-18
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* Bank 0,1 - FLASH SIMM
|
|
|
|
|
*
|
|
|
|
|
* This expects the FLASH SIMM to be connected to *CS0
|
|
|
|
|
* It consists of 4 AM29F080B parts.
|
|
|
|
|
*
|
|
|
|
|
* Note: For the 4 MB SIMM, *CS1 is unused.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* BR0 is configured as follows:
|
|
|
|
|
*
|
|
|
|
|
* - Base address of 0xFE000000
|
|
|
|
|
* - 32 bit port size
|
|
|
|
|
* - Data errors checking is disabled
|
|
|
|
|
* - Read and write access
|
|
|
|
|
* - GPCM 60x bus
|
|
|
|
|
* - Access are handled by the memory controller according to MSEL
|
|
|
|
|
* - Not used for atomic operations
|
|
|
|
|
* - No data pipelining is done
|
|
|
|
|
* - Valid
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_BR0_PRELIM ((CFG_FLASH0_BASE & BRx_BA_MSK) |\
|
|
|
|
|
BRx_PS_32 |\
|
|
|
|
|
BRx_MS_GPCM_P |\
|
|
|
|
|
BRx_V)
|
|
|
|
|
|
|
|
|
|
/* OR0 is configured as follows:
|
|
|
|
|
*
|
|
|
|
|
* - 32 MB
|
|
|
|
|
* - *BCTL0 is asserted upon access to the current memory bank
|
|
|
|
|
* - *CW / *WE are negated a quarter of a clock earlier
|
|
|
|
|
* - *CS is output at the same time as the address lines
|
|
|
|
|
* - Uses a clock cycle length of 5
|
|
|
|
|
* - *PSDVAL is generated internally by the memory controller
|
|
|
|
|
* unless *GTA is asserted earlier externally.
|
|
|
|
|
* - Relaxed timing is generated by the GPCM for accesses
|
|
|
|
|
* initiated to this memory region.
|
|
|
|
|
* - One idle clock is inserted between a read access from the
|
|
|
|
|
* current bank and the next access.
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH0_SIZE) |\
|
|
|
|
|
ORxG_CSNT |\
|
|
|
|
|
ORxG_ACS_DIV1 |\
|
|
|
|
|
ORxG_SCY_5_CLK |\
|
|
|
|
|
ORxG_TRLX |\
|
|
|
|
|
ORxG_EHTR)
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* BR2,BR3 - Base Register
|
|
|
|
|
* Ref: Section 10.3.1 on page 10-14
|
|
|
|
|
* OR2,OR3 - Option Register
|
|
|
|
|
* Ref: Section 10.3.2 on page 10-16
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Bank 2,3 - 128 MB SDRAM DIMM
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* With a 128 MB DIMM, the BR2 is configured as follows:
|
|
|
|
|
*
|
|
|
|
|
* - Base address of 0x00000000/0x08000000
|
|
|
|
|
* - 64 bit port size (60x bus only)
|
|
|
|
|
* - Data errors checking is disabled
|
|
|
|
|
* - Read and write access
|
|
|
|
|
* - SDRAM 60x bus
|
|
|
|
|
* - Access are handled by the memory controller according to MSEL
|
|
|
|
|
* - Not used for atomic operations
|
|
|
|
|
* - No data pipelining is done
|
|
|
|
|
* - Valid
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_BR2_PRELIM ((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
|
|
|
|
|
BRx_PS_64 |\
|
|
|
|
|
BRx_MS_SDRAM_P |\
|
|
|
|
|
BRx_V)
|
|
|
|
|
|
|
|
|
|
#define CFG_BR3_PRELIM ((CFG_SDRAM1_BASE & BRx_BA_MSK) |\
|
|
|
|
|
BRx_PS_64 |\
|
|
|
|
|
BRx_MS_SDRAM_P |\
|
|
|
|
|
BRx_V)
|
|
|
|
|
|
|
|
|
|
/* With a 128 MB DIMM, the OR2 is configured as follows:
|
|
|
|
|
*
|
|
|
|
|
* - 128 MB
|
|
|
|
|
* - 4 internal banks per device
|
|
|
|
|
* - Row start address bit is A8 with PSDMR[PBI] = 0
|
|
|
|
|
* - 13 row address lines
|
|
|
|
|
* - Back-to-back page mode
|
|
|
|
|
* - Internal bank interleaving within save device enabled
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define CFG_OR2_PRELIM (MEG_TO_AM(CFG_SDRAM0_SIZE) |\
|
|
|
|
|
ORxS_BPD_4 |\
|
|
|
|
|
ORxS_ROWST_PBI0_A7 |\
|
|
|
|
|
ORxS_NUMR_13)
|
|
|
|
|
|
|
|
|
|
#define CFG_OR3_PRELIM (MEG_TO_AM(CFG_SDRAM1_SIZE) |\
|
|
|
|
|
ORxS_BPD_4 |\
|
|
|
|
|
ORxS_ROWST_PBI0_A7 |\
|
|
|
|
|
ORxS_NUMR_13)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* PSDMR - 60x Bus SDRAM Mode Register
|
|
|
|
|
* Ref: Section 10.3.3 on page 10-21
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* With a 128 MB DIMM, the PSDMR is configured as follows:
|
|
|
|
|
*
|
|
|
|
|
* - Page Based Interleaving,
|
|
|
|
|
* - Refresh Enable,
|
|
|
|
|
* - Normal Operation
|
|
|
|
|
* - Address Multiplexing where A5 is output on A14 pin
|
|
|
|
|
* (A6 on A15, and so on),
|
|
|
|
|
* - use address pins A13-A15 as bank select,
|
|
|
|
|
* - A9 is output on SDA10 during an ACTIVATE command,
|
|
|
|
|
* - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
|
|
|
|
|
* - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
|
|
|
|
|
* is 3 clocks,
|
|
|
|
|
* - earliest timing for READ/WRITE command after ACTIVATE command is
|
|
|
|
|
* 2 clocks,
|
|
|
|
|
* - earliest timing for PRECHARGE after last data was read is 1 clock,
|
|
|
|
|
* - earliest timing for PRECHARGE after last data was written is 1 clock,
|
|
|
|
|
* - External Address Multiplexing enabled
|
|
|
|
|
* - CAS Latency is 2.
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_PSDMR (PSDMR_RFEN |\
|
|
|
|
|
PSDMR_SDAM_A14_IS_A5 |\
|
|
|
|
|
PSDMR_BSMA_A13_A15 |\
|
|
|
|
|
PSDMR_SDA10_PBI0_A9 |\
|
|
|
|
|
PSDMR_RFRC_7_CLK |\
|
|
|
|
|
PSDMR_PRETOACT_3W |\
|
|
|
|
|
PSDMR_ACTTORW_2W |\
|
|
|
|
|
PSDMR_LDOTOPRE_1C |\
|
|
|
|
|
PSDMR_WRC_1C |\
|
|
|
|
|
PSDMR_EAMUX |\
|
|
|
|
|
PSDMR_CL_2)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define CFG_PSRT 0x0e
|
|
|
|
|
#define CFG_MPTPR MPTPR_PTP_DIV32
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* BR4 - Base Register
|
|
|
|
|
* Ref: Section 10.3.1 on page 10-14
|
|
|
|
|
* OR4 - Option Register
|
|
|
|
|
* Ref: Section 10.3.2 on page 10-16
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Bank 4 - On board SDRAM
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
/* With 16 MB of onboard SDRAM BR4 is configured as follows
|
|
|
|
|
*
|
|
|
|
|
* - Base address 0x38000000
|
|
|
|
|
* - 32 bit port size
|
|
|
|
|
* - Data error checking disabled
|
|
|
|
|
* - Read/Write access
|
|
|
|
|
* - SDRAM local bus
|
|
|
|
|
* - Not used for atomic operations
|
|
|
|
|
* - No data pipelining is done
|
|
|
|
|
* - Valid
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define CFG_BR4_PRELIM ((CFG_SDRAM2_BASE & BRx_BA_MSK) |\
|
|
|
|
|
BRx_PS_32 |\
|
|
|
|
|
BRx_DECC_NONE |\
|
|
|
|
|
BRx_MS_SDRAM_L |\
|
|
|
|
|
BRx_V)
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* With 16MB SDRAM, OR4 is configured as follows
|
|
|
|
|
* - 4 internal banks per device
|
|
|
|
|
* - Row start address bit is A10 with LSDMR[PBI] = 0
|
|
|
|
|
* - 12 row address lines
|
|
|
|
|
* - Back-to-back page mode
|
|
|
|
|
* - Internal bank interleaving within save device enabled
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define CFG_OR4_PRELIM (MEG_TO_AM(CFG_SDRAM2_SIZE) |\
|
|
|
|
|
ORxS_BPD_4 |\
|
|
|
|
|
ORxS_ROWST_PBI0_A10 |\
|
|
|
|
|
ORxS_NUMR_12)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* LSDMR - Local Bus SDRAM Mode Register
|
|
|
|
|
* Ref: Section 10.3.4 on page 10-24
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* With a 16 MB onboard SDRAM, the LSDMR is configured as follows:
|
|
|
|
|
*
|
|
|
|
|
* - Page Based Interleaving,
|
|
|
|
|
* - Refresh Enable,
|
|
|
|
|
* - Normal Operation
|
|
|
|
|
* - Address Multiplexing where A5 is output on A13 pin
|
|
|
|
|
* (A6 on A15, and so on),
|
|
|
|
|
* - use address pins A15-A17 as bank select,
|
|
|
|
|
* - A11 is output on SDA10 during an ACTIVATE command,
|
|
|
|
|
* - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
|
|
|
|
|
* - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
|
|
|
|
|
* is 2 clocks,
|
|
|
|
|
* - earliest timing for READ/WRITE command after ACTIVATE command is
|
|
|
|
|
* 2 clocks,
|
|
|
|
|
* - SDRAM burst length is 8
|
|
|
|
|
* - earliest timing for PRECHARGE after last data was read is 1 clock,
|
|
|
|
|
* - earliest timing for PRECHARGE after last data was written is 1 clock,
|
|
|
|
|
* - External Address Multiplexing disabled
|
|
|
|
|
* - CAS Latency is 2.
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_LSDMR (PSDMR_RFEN |\
|
|
|
|
|
PSDMR_SDAM_A13_IS_A5 |\
|
|
|
|
|
PSDMR_BSMA_A15_A17 |\
|
|
|
|
|
PSDMR_SDA10_PBI0_A11 |\
|
|
|
|
|
PSDMR_RFRC_7_CLK |\
|
|
|
|
|
PSDMR_PRETOACT_2W |\
|
|
|
|
|
PSDMR_ACTTORW_2W |\
|
|
|
|
|
PSDMR_BL |\
|
|
|
|
|
PSDMR_LDOTOPRE_1C |\
|
|
|
|
|
PSDMR_WRC_1C |\
|
|
|
|
|
PSDMR_CL_2)
|
|
|
|
|
|
|
|
|
|
#define CFG_LSRT 0x0e
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* BR5 - Base Register
|
|
|
|
|
* Ref: Section 10.3.1 on page 10-14
|
|
|
|
|
* OR5 - Option Register
|
|
|
|
|
* Ref: Section 10.3.2 on page 10-16
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Bank 5 EEProm and Mailbox
|
|
|
|
|
*
|
|
|
|
|
* The EEPROM and mailbox live on the same chip select.
|
|
|
|
|
* the eeprom is selected if the MSb of the address is set and the mailbox is
|
|
|
|
|
* selected if the MSb of the address is clear.
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* BR5 is configured as follows:
|
|
|
|
|
*
|
|
|
|
|
* - Base address of 0x32000000/0xF2000000
|
|
|
|
|
* - 8 bit
|
|
|
|
|
* - Data error checking disabled
|
|
|
|
|
* - Read/Write access
|
|
|
|
|
* - GPCM 60x Bus
|
|
|
|
|
* - SDRAM local bus
|
|
|
|
|
* - No data pipelining is done
|
|
|
|
|
* - Valid
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define CFG_BR5_PRELIM ((CFG_MAILBOX_BASE & BRx_BA_MSK) |\
|
|
|
|
|
BRx_PS_8 |\
|
|
|
|
|
BRx_DECC_NONE |\
|
|
|
|
|
BRx_MS_GPCM_P |\
|
|
|
|
|
BRx_V)
|
|
|
|
|
/* OR5 is configured as follows
|
|
|
|
|
* - buffer control enabled
|
|
|
|
|
* - chip select negated normally
|
|
|
|
|
* - CS output 1/2 clock after address
|
|
|
|
|
* - 15 wait states
|
|
|
|
|
* - *PSDVAL is generated internally by the memory controller
|
|
|
|
|
* unless *GTA is asserted earlier externally.
|
|
|
|
|
* - Relaxed timing is generated by the GPCM for accesses
|
|
|
|
|
* initiated to this memory region.
|
|
|
|
|
* - One idle clock is inserted between a read access from the
|
|
|
|
|
* current bank and the next access.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define CFG_OR5_PRELIM ((P2SZ_TO_AM(CFG_MAILBOX_SIZE) & ~0x80000000) |\
|
|
|
|
|
ORxG_ACS_DIV2 |\
|
|
|
|
|
ORxG_SCY_15_CLK |\
|
|
|
|
|
ORxG_TRLX |\
|
|
|
|
|
ORxG_EHTR)
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* BR6 - Base Register
|
|
|
|
|
* Ref: Section 10.3.1 on page 10-14
|
|
|
|
|
* OR6 - Option Register
|
|
|
|
|
* Ref: Section 10.3.2 on page 10-18
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* Bank 6 - I/O select
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* BR6 is configured as follows:
|
|
|
|
|
*
|
|
|
|
|
* - Base address of 0xE0000000
|
|
|
|
|
* - 16 bit port size
|
|
|
|
|
* - Data errors checking is disabled
|
|
|
|
|
* - Read and write access
|
|
|
|
|
* - GPCM 60x bus
|
|
|
|
|
* - Access are handled by the memory controller according to MSEL
|
|
|
|
|
* - Not used for atomic operations
|
|
|
|
|
* - No data pipelining is done
|
|
|
|
|
* - Valid
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_BR6_PRELIM ((CFG_IOSELECT_BASE & BRx_BA_MSK) |\
|
|
|
|
|
BRx_PS_16 |\
|
|
|
|
|
BRx_MS_GPCM_P |\
|
|
|
|
|
BRx_V)
|
|
|
|
|
|
|
|
|
|
/* OR6 is configured as follows
|
|
|
|
|
* - buffer control enabled
|
|
|
|
|
* - chip select negated normally
|
|
|
|
|
* - CS output 1/2 clock after address
|
|
|
|
|
* - 15 wait states
|
|
|
|
|
* - *PSDVAL is generated internally by the memory controller
|
|
|
|
|
* unless *GTA is asserted earlier externally.
|
|
|
|
|
* - Relaxed timing is generated by the GPCM for accesses
|
|
|
|
|
* initiated to this memory region.
|
|
|
|
|
* - One idle clock is inserted between a read access from the
|
|
|
|
|
* current bank and the next access.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define CFG_OR6_PRELIM (MEG_TO_AM(CFG_IOSELECT_SIZE) |\
|
|
|
|
|
ORxG_ACS_DIV2 |\
|
|
|
|
|
ORxG_SCY_15_CLK |\
|
|
|
|
|
ORxG_TRLX |\
|
|
|
|
|
ORxG_EHTR)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* BR7 - Base Register
|
|
|
|
|
* Ref: Section 10.3.1 on page 10-14
|
|
|
|
|
* OR7 - Option Register
|
|
|
|
|
* Ref: Section 10.3.2 on page 10-18
|
|
|
|
|
*-----------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* Bank 7 - LEDs and switches
|
|
|
|
|
*
|
|
|
|
|
* LEDs are at 0x00001 (write only)
|
|
|
|
|
* switches are at 0x00001 (read only)
|
|
|
|
|
*/
|
|
|
|
|
#ifdef CFG_LED_BASE
|
|
|
|
|
|
|
|
|
|
/* BR7 is configured as follows:
|
|
|
|
|
*
|
|
|
|
|
* - Base address of 0xA0000000
|
|
|
|
|
* - 8 bit port size
|
|
|
|
|
* - Data errors checking is disabled
|
|
|
|
|
* - Read and write access
|
|
|
|
|
* - GPCM 60x bus
|
|
|
|
|
* - Access are handled by the memory controller according to MSEL
|
|
|
|
|
* - Not used for atomic operations
|
|
|
|
|
* - No data pipelining is done
|
|
|
|
|
* - Valid
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_BR7_PRELIM ((CFG_LED_BASE & BRx_BA_MSK) |\
|
|
|
|
|
BRx_PS_8 |\
|
|
|
|
|
BRx_DECC_NONE |\
|
|
|
|
|
BRx_MS_GPCM_P |\
|
|
|
|
|
BRx_V)
|
|
|
|
|
|
|
|
|
|
/* OR7 is configured as follows:
|
|
|
|
|
*
|
|
|
|
|
* - 1 byte
|
|
|
|
|
* - *BCTL0 is asserted upon access to the current memory bank
|
|
|
|
|
* - *CW / *WE are negated a quarter of a clock earlier
|
|
|
|
|
* - *CS is output at the same time as the address lines
|
|
|
|
|
* - Uses a clock cycle length of 15
|
|
|
|
|
* - *PSDVAL is generated internally by the memory controller
|
|
|
|
|
* unless *GTA is asserted earlier externally.
|
|
|
|
|
* - Relaxed timing is generated by the GPCM for accesses
|
|
|
|
|
* initiated to this memory region.
|
|
|
|
|
* - One idle clock is inserted between a read access from the
|
|
|
|
|
* current bank and the next access.
|
|
|
|
|
*/
|
|
|
|
|
#define CFG_OR7_PRELIM (ORxG_AM_MSK |\
|
|
|
|
|
ORxG_CSNT |\
|
|
|
|
|
ORxG_ACS_DIV1 |\
|
|
|
|
|
ORxG_SCY_15_CLK |\
|
|
|
|
|
ORxG_TRLX |\
|
|
|
|
|
ORxG_EHTR)
|
|
|
|
|
#endif /* CFG_LED_BASE */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Internal Definitions
|
|
|
|
|
*
|
|
|
|
|
* Boot Flags
|
|
|
|
|
*/
|
|
|
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
|
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
|
|
|
|
|
|
#endif /* __CONFIG_H */
|
