u-boot/configs/Empire_electronix_m712_defconfig

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-m712"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
CONFIG_MMC0_CD_PIN="PG0"
CONFIG_USB0_VBUS_PIN="PG12"
CONFIG_USB0_VBUS_DET="PG1"
CONFIG_USB0_ID_DET="PG2"
CONFIG_AXP_GPIO=y
# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_CONS_INDEX=2
CONFIG_USB_MUSB_HOST=y
sun5i: Add defconfig and dts file for the Empire Electronix M712 tablet Add a defconfig and dts file for the Empire Electronix M712 tablet, this is a 7" A13 tablet, with micro-usb (otg), headphone and micro-sd slots on the outside. It uses a Goodix gt811 touchscreen controller, a RTL8188CTV wifi chip and a DMART06 (1238a4) accelerometer. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-08-19 18:21:49 +08:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_SUNXI=y`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2021-06-28 22:17:29 +08:00			`CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-m712"`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2018-04-08 08:27:54 +08:00			`CONFIG_SPL=y`
sun5i: Add defconfig and dts file for the Empire Electronix M712 tablet Add a defconfig and dts file for the Empire Electronix M712 tablet, this is a 7" A13 tablet, with micro-usb (otg), headphone and micro-sd slots on the outside. It uses a Goodix gt811 touchscreen controller, a RTL8188CTV wifi chip and a DMART06 (1238a4) accelerometer. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-08-19 18:21:49 +08:00			`CONFIG_MACH_SUN5I=y`
			`CONFIG_DRAM_CLK=408`
			`CONFIG_MMC0_CD_PIN="PG0"`
			`CONFIG_USB0_VBUS_PIN="PG12"`
			`CONFIG_USB0_VBUS_DET="PG1"`
			`CONFIG_USB0_ID_DET="PG2"`
			`CONFIG_AXP_GPIO=y`
			`# CONFIG_VIDEO_HDMI is not set`
			`CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"`
			`CONFIG_VIDEO_LCD_POWER="AXP0-0"`
			`CONFIG_VIDEO_LCD_BL_EN="AXP0-1"`
			`CONFIG_VIDEO_LCD_BL_PWM="PB2"`
			`# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set`
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> 2021-07-11 11:14:36 +08:00			`CONFIG_SPL_I2C=y`
Convert CONFIG_SYS_I2C_MVTWSI to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MVTWSI Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-18 05:59:47 +08:00			`CONFIG_SYS_I2C_MVTWSI=y`
Convert all of CONFIG_CONS_INDEX to Kconfig This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com> 2018-03-07 08:02:27 +08:00			`CONFIG_CONS_INDEX=2`
sun5i: Add defconfig and dts file for the Empire Electronix M712 tablet Add a defconfig and dts file for the Empire Electronix M712 tablet, this is a 7" A13 tablet, with micro-usb (otg), headphone and micro-sd slots on the outside. It uses a Goodix gt811 touchscreen controller, a RTL8188CTV wifi chip and a DMART06 (1238a4) accelerometer. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-08-19 18:21:49 +08:00			`CONFIG_USB_MUSB_HOST=y`