mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-24 20:54:24 +08:00
Code Issues Packages Projects Releases Wiki Activity
0e7954745c
u-boot/configs/rcar3_ulcb_defconfig

91 lines
2.0 KiB
Plaintext
Raw Normal View History

ARM: rmobile: ulcb: Add ULCB board support Add initial support for the R8A7795 and R8A7796 based ULCB board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:15:21 +08:00
CONFIG_ARM=y
Convert CONFIG_ARCH_CPU_INIT to Kconfig This converts the following to Kconfig: CONFIG_ARCH_CPU_INIT Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Felix Brack <fb@ltec.ch>
2019-08-14 21:29:25 +08:00
CONFIG_ARCH_CPU_INIT=y
ARM: rmobile: ulcb: Add ULCB board support Add initial support for the R8A7795 and R8A7796 based ULCB board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:15:21 +08:00
CONFIG_ARCH_RMOBILE=y
configs: Migrate CONFIG_SYS_TEXT_BASE On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-04 01:10:38 +08:00
CONFIG_SYS_TEXT_BASE=0x50000000
ARM: rmobile: ulcb: Add ULCB board support Add initial support for the R8A7795 and R8A7796 based ULCB board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:15:21 +08:00
CONFIG_SYS_MALLOC_F_LEN=0x2000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 09:02:10 +08:00
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xFFFE0000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-23 02:38:00 +08:00
CONFIG_DM_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 22:17:29 +08:00
CONFIG_DEFAULT_DEVICE_TREE="r8a77950-ulcb-u-boot"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-07 01:54:25 +08:00
CONFIG_SPL_TEXT_BASE=0xe6338000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-23 02:38:00 +08:00
CONFIG_RCAR_GEN3=y
CONFIG_TARGET_ULCB=y
ARM: rmobile: Enable fitImage support on Gen3 Enable fitImage support to be on the right side of the millenium. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-16 06:16:43 +08:00
CONFIG_FIT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-10 00:22:06 +08:00
CONFIG_SUPPORT_RAW_INITRD=y
common: Move CONFIG_BOOTARGS to Kconfig Also introduce CONFIG_USE_BOOTARGS option so we can control if CONFIG_BOOTARGS defined at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Resync r8a779[56]_ulcb, various ls10xx targets] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 01:22:17 +08:00
CONFIG_USE_BOOTARGS=y
ARM: rmobile: Remove console parameter from bootargs on Gen3 This patch removes 'console=' argument, because kernel uses stdout-path as parameter. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-09-25 15:16:14 +08:00
CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20"
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2 Synchronize R-Car Gen3 device trees with Linux 5.6.2, commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-04 22:12:48 +08:00
CONFIG_DEFAULT_FDT_FILE="r8a77950-ulcb.dtb"
ARM: rmobile: Enable dfu tftp on Gen3 Enable the fitImage update options on RCar Gen3 boards. This permits easy update of multiple bootloader components. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-29 13:29:46 +08:00
CONFIG_UPDATE_TFTP=y
ARM: rmobile: Enable HUSH parser The HUSH parser was disabled somewhere along the way, reenable it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexandru Gagniuc <alex.g@adaptrum.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-20 23:13:42 +08:00
CONFIG_HUSH_PARSER=y
ARM: rmobile: ulcb: Add ULCB board support Add initial support for the R8A7795 and R8A7796 based ULCB board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:15:21 +08:00
CONFIG_CMD_BOOTZ=y
ARM: rmobile: Enable dfu tftp on Gen3 Enable the fitImage update options on RCar Gen3 boards. This permits easy update of multiple bootloader components. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-29 13:29:46 +08:00
CONFIG_CMD_DFU=y
ARM: rmobile: Enable GPIO command This command is convenient for manipulating the GPIOs, so enable it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-16 03:12:52 +08:00
CONFIG_CMD_GPIO=y
ARM: rmobile: Migrate boards to RCar IIC drivers Stop using the old ad-hoc SH I2C driver and use the new RCar IIC driver instead. The SH I2C driver should be deprecated and removed eventually. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-27 14:36:22 +08:00
CONFIG_CMD_I2C=y
ARM: rmobile: ulcb: Add ULCB board support Add initial support for the R8A7795 and R8A7796 based ULCB board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:15:21 +08:00
CONFIG_CMD_MMC=y
ARM: rmobile: Enable dfu tftp on Gen3 Enable the fitImage update options on RCar Gen3 boards. This permits easy update of multiple bootloader components. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-29 13:29:46 +08:00
CONFIG_CMD_SPI=y
ARM: rmobile: ulcb: Add ULCB board support Add initial support for the R8A7795 and R8A7796 based ULCB board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:15:21 +08:00
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
ARM: rmobile: Move CONFIG_CMD_ from rcar-gen3-common to configs Just move those config options from macros to configs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-13 01:08:22 +08:00
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
ARM: rmobile: Update defconfig of R-Car Gen3 This updates defconfig of R-Car Gen3 to keep with the latest Kconfig. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-03 03:27:53 +08:00
CONFIG_OF_CONTROL=y
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2 Synchronize R-Car Gen3 device trees with Linux 5.6.2, commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-04 22:12:48 +08:00
CONFIG_OF_LIST="r8a77950-ulcb-u-boot r8a77960-ulcb-u-boot r8a77965-ulcb-u-boot"
ARM: rmobile: Enable multi-DTB fit LZO compression Enable LZO compression of the multi-DTB fitImages, since the U-Boot with multiple DTs enabled is becoming quite large and the DTs can be well compressed. The LZO compression saves almost 200 kiB on the Salvator-X(S) and ULCB targets. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-14 04:09:49 +08:00
CONFIG_MULTI_DTB_FIT_LZO=y
CONFIG_MULTI_DTB_FIT_USER_DEFINED_AREA=y
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 19:48:56 +08:00
CONFIG_ENV_OVERWRITE=y
env: Convert CONFIG_ENV_IS_IN... to a choice At present we support multiple environment drivers but there is not way to select between them at run time. Also settings related to the position and size of the environment area are global (i.e. apply to all locations). Until these limitations are removed we cannot really support more than one environment location. Adjust the location to be a choice so that only one can be selected. By default the environment is 'nowhere', meaning that the environment exists only in memory and cannot be saved. Also expand the help for the 'nowhere' option and move it to the top since it is the default. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Move all of the imply logic to default X if Y so it works again] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-04 02:21:59 +08:00
CONFIG_ENV_IS_IN_MMC=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 11:46:36 +08:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-25 05:14:47 +08:00
CONFIG_SYS_MMC_ENV_DEV=1
CONFIG_SYS_MMC_ENV_PART=2
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-10 00:22:06 +08:00
CONFIG_VERSION_VARIABLE=y
ARM: rmobile: Use PRR driver on all Gen3 boards Mark the PRR as u-boot,dm-pre-reloc in all Gen3 board DTs as it is needed very early and turn on the CONFIG_SYSCON to allow the PRR driver to bind as a syscon uclass. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-10 04:56:01 +08:00
CONFIG_REGMAP=y
CONFIG_SYSCON=y
ARM: rmobile: Enable clock framework on ULCB Since there is now a clock driver for RCar Gen3, enable it on this board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:18:05 +08:00
CONFIG_CLK=y
CONFIG_CLK_RENESAS=y
ARM: rmobile: Enable dfu tftp on Gen3 Enable the fitImage update options on RCar Gen3 boards. This permits easy update of multiple bootloader components. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-29 13:29:46 +08:00
CONFIG_DFU_TFTP=y
CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
ARM: rmobile: Switch to DM PFC pinmux and GPIO driver Enable the PFC pinmux and GPIO drivers and disable the SH GPIO combo driver. This allows the drivers to obtain pinmux and GPIO configuration from DT rather than hard-coding it in board files. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-16 03:13:57 +08:00
CONFIG_RCAR_GPIO=y
ARM: rmobile: Migrate boards to RCar IIC drivers Stop using the old ad-hoc SH I2C driver and use the new RCar IIC driver instead. The SH I2C driver should be deprecated and removed eventually. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-27 14:36:22 +08:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_RCAR_IIC=y
ARM: rmobile: Enable HS200 mode on RCar Gen3 Enable the HS200 on RCar Gen3 platforms, since the SDHI core supports it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-22 16:37:04 +08:00
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
ARM: rmobile: Enable MMC HS400 on Salvator-X, ULCB, Ebisu Enable the HS400 support code on H3, M3W, M3N Salvator-X(S) and ULCB boards as well as E3 Ebisu board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-13 12:50:31 +08:00
CONFIG_MMC_HS400_SUPPORT=y
ARM: rmobile: Switch to CONFIG_RENESAS_SDHI Since the Renesas SDHI has it's own custom driver sharing the common code with Uniphier one, adjust the Kconfig entries. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-09 01:17:55 +08:00
CONFIG_RENESAS_SDHI=y
ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu Enable the RPC Hyperflash driver on R8A7795,R8A7796,R8A77965 Salvator-X,ULCB and R8A77990 Ebisu. Note that to make the HF accessible, mainline ATF is mandatory and must be built with RCAR_RPC_HYPERFLASH_LOCKED=0 . Note that this is intended for development and testing convenience only and must be disabled in deployment for platform security reasons. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-30 03:28:50 +08:00
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_NOR_FLASH=y
ARM: rmobile: Enable CONFIG_SYS_FLASH_PROTECTION Enable CONFIG_SYS_FLASH_PROTECTION on Salvator-X(S), ULCB, Ebisu, which means the Spansion HF PPB protection bits can be operated using the 'protect' U-Boot command. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2021-04-04 07:10:15 +08:00
CONFIG_FLASH_CFI_DRIVER=y
ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu Enable the RPC Hyperflash driver on R8A7795,R8A7796,R8A77965 Salvator-X,ULCB and R8A77990 Ebisu. Note that to make the HF accessible, mainline ATF is mandatory and must be built with RCAR_RPC_HYPERFLASH_LOCKED=0 . Note that this is intended for development and testing convenience only and must be disabled in deployment for platform security reasons. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-30 03:28:50 +08:00
CONFIG_CFI_FLASH=y
ARM: rmobile: Enable CONFIG_SYS_FLASH_PROTECTION Enable CONFIG_SYS_FLASH_PROTECTION on Salvator-X(S), ULCB, Ebisu, which means the Spansion HF PPB protection bits can be operated using the 'protect' U-Boot command. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2021-04-04 07:10:15 +08:00
CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_PROTECTION=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-27 20:28:38 +08:00
CONFIG_RENESAS_RPC_HF=y
CONFIG_DM_SPI_FLASH=y
ARM: rmobile: Enable dfu tftp on Gen3 Enable the fitImage update options on RCar Gen3 boards. This permits easy update of multiple bootloader components. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-29 13:29:46 +08:00
CONFIG_SPI_FLASH_SPANSION=y
Convert CONFIG_PHYLIB et al to Kconfig This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-25 03:35:53 +08:00
CONFIG_BITBANGMII=y
ARM: rmobile: Enable Micrel KSZ90x1 PHY driver on ULCB Enable the Micrel KSZ90x1 driver on ULCB, since the board is populated with KSZ9031 and without this driver, the PHY cannot be operated. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-27 03:59:23 +08:00
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
ARM: rmobile: ulcb: Add ULCB board support Add initial support for the R8A7795 and R8A7796 based ULCB board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:15:21 +08:00
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
ARM: rmobile: Enable DM regulator support Regulators are needed for the MMC framework to let it toggle the SD power. Enable DM regulator support and support for fixed and GPIO regulator. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-16 03:12:40 +08:00
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
serial: sh: Convert to Kconfig Convert the SH Serial to Kconfig using tools/moveconfig.py tool and a bit of manual adjustment to cater for failed conversions. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:18:46 +08:00
CONFIG_SCIF_CONSOLE=y
ARM: rmobile: Enable dfu tftp on Gen3 Enable the fitImage update options on RCar Gen3 boards. This permits easy update of multiple bootloader components. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-29 13:29:46 +08:00
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_RENESAS_RPC_SPI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-26 20:32:25 +08:00
CONFIG_SYSRESET=y
ARM: rmobile: Enable support for OpTee on Gen3 Enable OpTee support on R-Car Gen3, so that U-Boot would copy the OpTee /firmware and /reserved-memory nodes into the Linux DT. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-04-12 02:54:02 +08:00
CONFIG_TEE=y
CONFIG_OPTEE=y
ARM: rmobile: ulcb: Add ULCB board support Add initial support for the R8A7795 and R8A7796 based ULCB board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:15:21 +08:00
CONFIG_USB=y
ARM: rmobile: Enable MMC and USB DM on ULCB Enable the MMC and USB DM on the board since it's the modern method and now supported by the drivers. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-20 23:13:50 +08:00
CONFIG_DM_USB=y
ARM: rmobile: Enable xHCI on RCar Gen3 boards Enable the XHCI support on all boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-10 18:33:11 +08:00
CONFIG_USB_XHCI_HCD=y
ARM: rmobile: ulcb: Add ULCB board support Add initial support for the R8A7795 and R8A7796 based ULCB board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:15:21 +08:00
CONFIG_USB_EHCI_HCD=y
ARM: rmobile: Enable EHCI generic on ULCB Enable the EHCI generic driver, which is superior to ad-hoc SoC specific one. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-13 01:07:24 +08:00
CONFIG_USB_EHCI_GENERIC=y
ARM: rmobile: ulcb: Add ULCB board support Add initial support for the R8A7795 and R8A7796 based ULCB board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-22 05:15:21 +08:00
CONFIG_USB_STORAGE=y
ARM: rmobile: Enable DTO support on Gen3 Enable support for applying DT overlays on Gen3. This is convenient for handling extra additional hardware, like ie. the Kingfisher. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-02-15 19:47:23 +08:00
CONFIG_OF_LIBFDT_OVERLAY=y
Reference in New Issue Copy Permalink