u-boot/common/cmd_pcmcia.c

350 lines
7.2 KiB
C
Raw Normal View History

2002-11-03 08:24:07 +08:00
/*
* (C) Copyright 2000-2006
2002-11-03 08:24:07 +08:00
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
2002-11-03 08:24:07 +08:00
*
********************************************************************
*
* Lots of code copied from:
*
* m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
* (C) 1999-2000 Magnus Damm <damm@bitsmart.com>
*
* "The ExCA standard specifies that socket controllers should provide
* two IO and five memory windows per socket, which can be independently
* configured and positioned in the host address space and mapped to
* arbitrary segments of card address space. " - David A Hinds. 1999
*
* This controller does _not_ meet the ExCA standard.
*
* m8xx pcmcia controller brief info:
* + 8 windows (attrib, mem, i/o)
* + up to two slots (SLOT_A and SLOT_B)
* + inputpins, outputpins, event and mask registers.
* - no offset register. sigh.
*
* Because of the lacking offset register we must map the whole card.
* We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
* Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
* * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
* The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
* They are maximum 64KByte each...
*/
/* #define DEBUG 1 */
/*
* PCMCIA support
*/
#include <common.h>
#include <command.h>
#include <config.h>
#include <pcmcia.h>
#include <asm/io.h>
/* -------------------------------------------------------------------- */
2002-11-03 08:24:07 +08:00
#if defined(CONFIG_CMD_PCMCIA)
extern int pcmcia_on (void);
extern int pcmcia_off (void);
2002-11-03 08:24:07 +08:00
int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
2002-11-03 08:24:07 +08:00
{
int rcode = 0;
if (argc != 2) {
printf ("Usage: pinit {on | off}\n");
return 1;
}
if (strcmp(argv[1],"on") == 0) {
rcode = pcmcia_on ();
2002-11-03 08:24:07 +08:00
} else if (strcmp(argv[1],"off") == 0) {
rcode = pcmcia_off ();
} else {
printf ("Usage: pinit {on | off}\n");
return 1;
}
return rcode;
}
U_BOOT_CMD(
pinit, 2, 0, do_pinit,
"PCMCIA sub-system",
"on - power on PCMCIA socket\n"
"pinit off - power off PCMCIA socket"
);
#endif
/* -------------------------------------------------------------------- */
#undef CHECK_IDE_DEVICE
#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#define CHECK_IDE_DEVICE
#endif
#if defined(CONFIG_PXA_PCMCIA)
#define CHECK_IDE_DEVICE
2002-11-03 08:24:07 +08:00
#endif
#ifdef CHECK_IDE_DEVICE
2002-11-03 08:24:07 +08:00
int ide_devices_found;
static uchar *known_cards[] = {
(uchar *)"ARGOSY PnPIDE D5",
NULL
};
2002-11-03 08:24:07 +08:00
#define MAX_TUPEL_SZ 512
#define MAX_FEATURES 4
2002-11-03 08:24:07 +08:00
#define MAX_IDENT_CHARS 64
#define MAX_IDENT_FIELDS 4
2002-11-03 08:24:07 +08:00
#define indent "\t "
2002-11-03 08:24:07 +08:00
static void print_funcid (int func)
{
puts (indent);
switch (func) {
case CISTPL_FUNCID_MULTI:
puts (" Multi-Function");
break;
case CISTPL_FUNCID_MEMORY:
puts (" Memory");
2002-11-03 08:24:07 +08:00
break;
case CISTPL_FUNCID_SERIAL:
puts (" Serial Port");
2002-11-03 08:24:07 +08:00
break;
case CISTPL_FUNCID_PARALLEL:
puts (" Parallel Port");
2002-11-03 08:24:07 +08:00
break;
case CISTPL_FUNCID_FIXED:
puts (" Fixed Disk");
break;
case CISTPL_FUNCID_VIDEO:
puts (" Video Adapter");
break;
case CISTPL_FUNCID_NETWORK:
puts (" Network Adapter");
break;
case CISTPL_FUNCID_AIMS:
puts (" AIMS Card");
break;
case CISTPL_FUNCID_SCSI:
puts (" SCSI Adapter");
break;
default:
puts (" Unknown");
2002-11-03 08:24:07 +08:00
break;
}
puts (" Card\n");
}
static void print_fixed (volatile uchar *p)
{
if (p == NULL)
return;
puts(indent);
switch (*p) {
case CISTPL_FUNCE_IDE_IFACE:
{ uchar iface = *(p+2);
puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
puts (" interface ");
break;
}
case CISTPL_FUNCE_IDE_MASTER:
case CISTPL_FUNCE_IDE_SLAVE:
{ uchar f1 = *(p+2);
uchar f2 = *(p+4);
puts ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
if (f1 & CISTPL_IDE_UNIQUE)
puts (" [unique]");
puts ((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
if (f2 & CISTPL_IDE_HAS_SLEEP)
puts (" [sleep]");
if (f2 & CISTPL_IDE_HAS_STANDBY)
puts (" [standby]");
if (f2 & CISTPL_IDE_HAS_IDLE)
puts (" [idle]");
if (f2 & CISTPL_IDE_LOW_POWER)
puts (" [low power]");
2002-11-03 08:24:07 +08:00
if (f2 & CISTPL_IDE_REG_INHIBIT)
puts (" [reg inhibit]");
2002-11-03 08:24:07 +08:00
if (f2 & CISTPL_IDE_HAS_INDEX)
puts (" [index]");
if (f2 & CISTPL_IDE_IOIS16)
puts (" [IOis16]");
break;
}
}
putc ('\n');
}
static int identify (volatile uchar *p)
2002-11-03 08:24:07 +08:00
{
uchar id_str[MAX_IDENT_CHARS];
uchar data;
uchar *t;
uchar **card;
int i, done;
2002-11-03 08:24:07 +08:00
if (p == NULL)
return (0); /* Don't know */
2002-11-03 08:24:07 +08:00
t = id_str;
done =0;
2002-11-03 08:24:07 +08:00
for (i=0; i<=4 && !done; ++i, p+=2) {
while ((data = *p) != '\0') {
if (data == 0xFF) {
done = 1;
break;
}
*t++ = data;
if (t == &id_str[MAX_IDENT_CHARS-1]) {
done = 1;
break;
}
p += 2;
}
if (!done)
*t++ = ' ';
2002-11-03 08:24:07 +08:00
}
*t = '\0';
while (--t > id_str) {
if (*t == ' ')
*t = '\0';
else
break;
}
puts ((char *)id_str);
putc ('\n');
2002-11-03 08:24:07 +08:00
for (card=known_cards; *card; ++card) {
debug ("## Compare against \"%s\"\n", *card);
if (strcmp((char *)*card, (char *)id_str) == 0) { /* found! */
debug ("## CARD FOUND ##\n");
return (1);
}
}
2002-11-03 08:24:07 +08:00
return (0); /* don't know */
}
2002-11-03 08:24:07 +08:00
int check_ide_device (int slot)
2002-11-03 08:24:07 +08:00
{
volatile uchar *ident = NULL;
volatile uchar *feature_p[MAX_FEATURES];
volatile uchar *p, *start, *addr;
2002-11-03 08:24:07 +08:00
int n_features = 0;
uchar func_id = ~0;
uchar code, len;
ushort config_base = 0;
int found = 0;
int i;
addr = (volatile uchar *)(CONFIG_SYS_PCMCIA_MEM_ADDR +
CONFIG_SYS_PCMCIA_MEM_SIZE * (slot * 4));
debug ("PCMCIA MEM: %08lX\n", (ulong)addr);
2002-11-03 08:24:07 +08:00
start = p = (volatile uchar *) addr;
2002-11-03 08:24:07 +08:00
while ((p - start) < MAX_TUPEL_SZ) {
code = *p; p += 2;
if (code == 0xFF) { /* End of chain */
break;
}
len = *p; p += 2;
#if defined(DEBUG) && (DEBUG > 1)
{ volatile uchar *q = p;
printf ("\nTuple code %02x length %d\n\tData:",
code, len);
for (i = 0; i < len; ++i) {
printf (" %02x", *q);
q+= 2;
}
}
#endif /* DEBUG */
switch (code) {
case CISTPL_VERS_1:
ident = p + 4;
break;
case CISTPL_FUNCID:
/* Fix for broken SanDisk which may have 0x80 bit set */
func_id = *p & 0x7F;
break;
case CISTPL_FUNCE:
if (n_features < MAX_FEATURES)
feature_p[n_features++] = p;
break;
case CISTPL_CONFIG:
config_base = (*(p+6) << 8) + (*(p+4));
debug ("\n## Config_base = %04x ###\n", config_base);
default:
break;
}
p += 2 * len;
}
found = identify (ident);
if (func_id != ((uchar)~0)) {
print_funcid (func_id);
if (func_id == CISTPL_FUNCID_FIXED)
found = 1;
else
return (1); /* no disk drive */
}
for (i=0; i<n_features; ++i) {
print_fixed (feature_p[i]);
}
if (!found) {
printf ("unknown card type\n");
return (1);
}
ide_devices_found |= (1 << slot);
#if CONFIG_CPC45
#else
2002-11-03 08:24:07 +08:00
/* set I/O area in config reg -> only valid for ARGOSY D5!!! */
*((uchar *)(addr + config_base)) = 1;
#endif
#if 0
printf("\n## Config_base = %04x ###\n", config_base);
printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base);
printf("Card Configuration and Status Register: %02x\n", readb(addr + config_base + 2));
printf("Pin Replacement Register Register: %02x\n", readb(addr + config_base + 4));
printf("Socket and Copy Register: %02x\n", readb(addr + config_base + 6));
#endif
2002-11-03 08:24:07 +08:00
return (0);
}
#endif /* CHECK_IDE_DEVICE */