mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-27 06:04:40 +08:00
Code Issues Packages Projects Releases Wiki Activity
master
u-boot/configs/odroid-go-ultra_defconfig

78 lines
1.9 KiB
Plaintext
Raw Permalink Normal View History

ARM: meson: add support for Odroid Go Ultra This adds initial support for the Hardkernel Odroid Go Ultra. The Odroid Go Ultra is a portable gaming device with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging The following are not yet handled: - Battery RK818 Gauge and Charging - 5inch 854×480 MIPI-DSI TFT LCD Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19 21:44:18 +08:00
CONFIG_ARM=y
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-02-10 18:25:07 +08:00
CONFIG_SYS_BOARD="odroid-go-ultra"
ARM: meson: add support for Odroid Go Ultra This adds initial support for the Hardkernel Odroid Go Ultra. The Odroid Go Ultra is a portable gaming device with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging The following are not yet handled: - Battery RK818 Gauge and Charging - 5inch 854×480 MIPI-DSI TFT LCD Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19 21:44:18 +08:00
CONFIG_ARCH_MESON=y
CONFIG_TEXT_BASE=0x01000000
CONFIG_NR_DRAM_BANKS=1
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 22:58:06 +08:00
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
ARM: meson: add support for Odroid Go Ultra This adds initial support for the Hardkernel Odroid Go Ultra. The Odroid Go Ultra is a portable gaming device with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging The following are not yet handled: - Battery RK818 Gauge and Charging - 5inch 854×480 MIPI-DSI TFT LCD Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19 21:44:18 +08:00
CONFIG_ENV_SIZE=0x2000
CONFIG_DM_GPIO=y
dts: meson-g12a: Switch to using upstream DT Enable OF_UPSTREAM to use upstream DT and add amlogic/ prefix to the DEFAULT_DEVICE_TREE. And thereby directly build DTB from dts/upstream/src/ including *-u-boot.dtsi files from arch/$(ARCH)/dts/ directory. Cc: Sumit Garg <sumit.garg@linaro.org> Acked-by: Viacheslav Bocharov <adeep@lexina.in> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # khadas-vim3_android Link: https://lore.kernel.org/r/20240329-u-boot-of-upstream-v2-4-2512ad3eb63d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-03-30 01:51:51 +08:00
CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-odroid-go-ultra"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 23:50:26 +08:00
CONFIG_OF_LIBFDT_OVERLAY=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 22:58:06 +08:00
CONFIG_DM_RESET=y
ARM: meson: add support for Odroid Go Ultra This adds initial support for the Hardkernel Odroid Go Ultra. The Odroid Go Ultra is a portable gaming device with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging The following are not yet handled: - Battery RK818 Gauge and Charging - 5inch 854×480 MIPI-DSI TFT LCD Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19 21:44:18 +08:00
CONFIG_MESON_G12A=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-10-08 23:18:32 +08:00
CONFIG_SYS_LOAD_ADDR=0x1000000
ARM: meson: add support for Odroid Go Ultra This adds initial support for the Hardkernel Odroid Go Ultra. The Odroid Go Ultra is a portable gaming device with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging The following are not yet handled: - Battery RK818 Gauge and Charging - 5inch 854×480 MIPI-DSI TFT LCD Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19 21:44:18 +08:00
CONFIG_DEBUG_UART_BASE=0xff803000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" odroid-go-ultra"
CONFIG_DEBUG_UART=y
CONFIG_REMAKE_ELF=y
ARM: meson: enable FIT with LEGACY_IMAGE_FORMAT on all configs Allow all boards to boot with a fitImage, but keep support for Legacy image format for now. Link: https://lore.kernel.org/r/20231023-usb-dfu-boot-v1-1-df9d121c67c1@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-23 20:41:34 +08:00
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_LEGACY_IMAGE_FORMAT=y
ARM: meson: add support for Odroid Go Ultra This adds initial support for the Hardkernel Odroid Go Ultra. The Odroid Go Ultra is a portable gaming device with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging The following are not yet handled: - Battery RK818 Gauge and Charging - 5inch 854×480 MIPI-DSI TFT LCD Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19 21:44:18 +08:00
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SYS_MAXARGS=32
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
ARM: meson: enable USB DFU + RAM on Amlogic boards with USB Gadget Enable DFU as an alternate USB boot method when script wasn't uploaded, this fixes USB full boot on G12/SM1 boards. Link: https://lore.kernel.org/r/20231023-usb-dfu-boot-v1-4-df9d121c67c1@linaro.org [narmstrong: remove dfu from ad401] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-23 20:41:37 +08:00
CONFIG_CMD_DFU=y
ARM: meson: add support for Odroid Go Ultra This adds initial support for the Hardkernel Odroid Go Ultra. The Odroid Go Ultra is a portable gaming device with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging The following are not yet handled: - Battery RK818 Gauge and Charging - 5inch 854×480 MIPI-DSI TFT LCD Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19 21:44:18 +08:00
CONFIG_CMD_GPIO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-02-10 18:25:07 +08:00
CONFIG_CMD_PMIC=y
ARM: meson: add support for Odroid Go Ultra This adds initial support for the Hardkernel Odroid Go Ultra. The Odroid Go Ultra is a portable gaming device with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging The following are not yet handled: - Battery RK818 Gauge and Charging - 5inch 854×480 MIPI-DSI TFT LCD Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19 21:44:18 +08:00
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ADC=y
CONFIG_SARADC_MESON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_ADC=y
CONFIG_BUTTON_GPIO=y
ARM: meson: enable USB DFU + RAM on Amlogic boards with USB Gadget Enable DFU as an alternate USB boot method when script wasn't uploaded, this fixes USB full boot on G12/SM1 boards. Link: https://lore.kernel.org/r/20231023-usb-dfu-boot-v1-4-df9d121c67c1@linaro.org [narmstrong: remove dfu from ad401] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-23 20:41:37 +08:00
CONFIG_DFU_RAM=y
ARM: meson: add support for Odroid Go Ultra This adds initial support for the Hardkernel Odroid Go Ultra. The Odroid Go Ultra is a portable gaming device with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging The following are not yet handled: - Battery RK818 Gauge and Charging - 5inch 854×480 MIPI-DSI TFT LCD Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19 21:44:18 +08:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MESON=y
CONFIG_MMC_MESON_GX=y
CONFIG_MESON_G12A_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_G12A=y
CONFIG_POWER_DOMAIN=y
CONFIG_MESON_EE_POWER_DOMAIN=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
CONFIG_SYSINFO=y
CONFIG_SYSINFO_SMBIOS=y
CONFIG_USB=y
configs: meson: enable missing DM_USB_GADGET Since commit b96640cbfb ("ARM: meson: g12a: switch dwc2 otg to DM") and commit e327e2affd ("ARM: meson: switch AXG & GX dwc2 otg to DM") Amlogic boards now requires DM_USB_GADGET to have USB Gadget to work. Add it to the boards configs as returned by: $ grep -L DM_USB_GADGET $(grep -l CONFIG_USB_GADGET $(grep -l MESON configs/*)) Fixes: b96640cbfb ("ARM: meson: g12a: switch dwc2 otg to DM") Fixes: e327e2affd ("ARM: meson: switch AXG & GX dwc2 otg to DM") Link: https://lore.kernel.org/r/20231206-u-boot-m2s-fix-usb-gadget-v1-1-1c4c66cd10f3@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-12-06 17:04:21 +08:00
CONFIG_DM_USB_GADGET=y
ARM: meson: add support for Odroid Go Ultra This adds initial support for the Hardkernel Odroid Go Ultra. The Odroid Go Ultra is a portable gaming device with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging The following are not yet handled: - Battery RK818 Gauge and Charging - 5inch 854×480 MIPI-DSI TFT LCD Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19 21:44:18 +08:00
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_MESON_G12A=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
CONFIG_USB_GADGET_DOWNLOAD=y
Reference in New Issue Copy Permalink