tcpdump/Makefile.in
guy 81f8a310d5 When making directories into which to install files in "make install",
change the directory mode to 755 after making the directory, so that the
directory is publicly readable and searchable even if the user doing the
"make install" has a umask that takes away public read and search
permissions.  (I think that's been a problem at least once - somebody
had trouble configuring and building Ethereal, probably because
"/usr/local/include/net" wasn't publicly readable and searchable, and my
suspicion is that somebody did "make install-incl" or "make install" of
libpcap when their umask was 027.)
2000-09-19 14:57:27 +00:00

188 lines
6.3 KiB
Makefile

# Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
# The Regents of the University of California. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that: (1) source code distributions
# retain the above copyright notice and this paragraph in its entirety, (2)
# distributions including binary code include the above copyright notice and
# this paragraph in its entirety in the documentation or other materials
# provided with the distribution, and (3) all advertising materials mentioning
# features or use of this software display the following acknowledgement:
# ``This product includes software developed by the University of California,
# Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
# the University nor the names of its contributors may be used to endorse
# or promote products derived from this software without specific prior
# written permission.
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
#
# @(#) $Header: /tcpdump/master/tcpdump/Makefile.in,v 1.239 2000-09-19 14:57:27 guy Exp $ (LBL)
#
# Various configurable paths (remember to edit Makefile.in, not Makefile)
#
# Top level hierarchy
prefix = @prefix@
exec_prefix = @exec_prefix@
# Pathname of directory to install the binary
sbindir = @sbindir@
# Pathname of directory to install the man page
mandir = @mandir@
# VPATH
srcdir = @srcdir@
VPATH = @srcdir@
#
# You shouldn't need to edit anything below here.
#
CC = @CC@
PROG = tcpdump
CCOPT = @V_CCOPT@
INCLS = -I. @V_INCLS@
DEFS = @DEFS@
# Standard CFLAGS
CFLAGS = $(CCOPT) $(DEFS) $(INCLS)
# Standard LDFLAGS
LDFLAGS = @LDFLAGS@
# Standard LIBS
LIBS = @LIBS@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
# Explicitly define compilation rule since SunOS 4's make doesn't like gcc.
# Also, gcc does not remove the .o before forking 'as', which can be a
# problem if you don't own the file but can write to the directory.
.c.o:
@rm -f $@
$(CC) $(CFLAGS) -c $(srcdir)/$*.c
CSRC = tcpdump.c \
print-arp.c print-atalk.c print-atm.c print-bootp.c \
print-decnet.c print-domain.c print-dvmrp.c print-egp.c \
print-ether.c print-fddi.c print-gre.c print-icmp.c \
print-igrp.c print-ip.c print-ipx.c print-isoclns.c print-krb.c \
print-llc.c print-nfs.c print-ntp.c print-null.c print-ospf.c \
print-pim.c print-ppp.c print-raw.c print-rip.c print-sl.c \
print-snmp.c print-stp.c print-sunrpc.c print-tcp.c print-tftp.c \
print-udp.c print-wb.c addrtoname.c gmt2local.c machdep.c \
parsenfsfh.c util.c savestr.c setsignal.c \
print-esp.c print-ah.c print-vjc.c print-isakmp.c print-chdlc.c \
print-ipcomp.c print-mobile.c print-l2tp.c print-bgp.c print-rx.c \
print-lane.c print-cip.c print-pppoe.c print-lcp.c \
print-smb.c smbutil.c print-ascii.c print-telnet.c print-cnfp.c \
print-vrrp.c print-cdp.c print-token.c
LOCALSRC = @LOCALSRC@
GENSRC = version.c
LIBOBJS = @LIBOBJS@
SRC = $(CSRC) $(GENSRC) $(LOCALSRC)
# We would like to say "OBJ = $(SRC:.c=.o)" but Ultrix's make cannot
# hack the extra indirection
OBJ = $(CSRC:.c=.o) $(GENSRC:.c=.o) $(LOCALSRC:.c=.o) $(LIBOBJS)
HDR = addrtoname.h appletalk.h bootp.h decnet.h \
ethertype.h extract.h fddi.h gmt2local.h igrp.h interface.h \
ipx.h llc.h machdep.h mib.h nfsfh.h nfsv2.h ntp.h ospf.h \
savestr.c setsignal.h \
gnuc.h ipsec_doi.h isakmp.h l2tp.h nameser.h \
netbios.h oakley.h ospf6.h ppp.h route6d.h
TAGHDR = \
/usr/include/arpa/tftp.h \
/usr/include/net/if_arp.h \
/usr/include/net/slip.h \
/usr/include/netinet/if_ether.h \
/usr/include/netinet/in.h \
/usr/include/netinet/ip_icmp.h \
/usr/include/netinet/tcp.h \
/usr/include/netinet/udp.h \
/usr/include/protocols/routed.h
TAGFILES = $(SRC) $(HDR) $(TAGHDR)
CLEANFILES = $(PROG) $(OBJ) $(GENSRC)
all: $(PROG)
$(PROG): $(OBJ) @V_PCAPDEP@
@rm -f $@
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJ) $(LIBS)
getnameinfo.o: $(srcdir)/missing/getnameinfo.c
$(CC) $(CFLAGS) -o $@ -c $(srcdir)/missing/getnameinfo.c
getaddrinfo.o: $(srcdir)/missing/getaddrinfo.c
$(CC) $(CFLAGS) -o $@ -c $(srcdir)/missing/getaddrinfo.c
inet_pton.o: $(srcdir)/missing/inet_pton.c
$(CC) $(CFLAGS) -o $@ -c $(srcdir)/missing/inet_pton.c
inet_ntop.o: $(srcdir)/missing/inet_ntop.c
$(CC) $(CFLAGS) -o $@ -c $(srcdir)/missing/inet_ntop.c
inet_aton.o: $(srcdir)/missing/inet_aton.c
$(CC) $(CFLAGS) -o $@ -c $(srcdir)/missing/inet_aton.c
snprintf.o: $(srcdir)/missing/snprintf.c
$(CC) $(CFLAGS) -o $@ -c $(srcdir)/missing/snprintf.c
strlcat.o: $(srcdir)/missing/strlcat.c
$(CC) $(CFLAGS) -o $@ -c $(srcdir)/missing/strlcat.c
strlcpy.o: $(srcdir)/missing/strlcpy.c
$(CC) $(CFLAGS) -o $@ -c $(srcdir)/missing/strlcpy.c
version.o: version.c
$(CC) $(CFLAGS) -c version.c
version.c: $(srcdir)/VERSION
@rm -f $@
sed -e 's/.*/char version[] = "&";/' $(srcdir)/VERSION > $@
install:
[ -d $(DESTDIR)$(sbindir) ] || \
(mkdir -p $(DESTDIR)$(sbindir); chmod 755 $(DESTDIR)$(sbindir))
$(INSTALL_PROGRAM) $(PROG) $(DESTDIR)$(sbindir)/$(PROG)
[ -d $(DESTDIR)$(mandir)/man1 ] || \
(mkdir -p $(DESTDIR)$(mandir)/man1; chmod 755 $(DESTDIR)$(mandir)/man1)
$(INSTALL_DATA) $(srcdir)/$(PROG).1 $(DESTDIR)$(mandir)/man1/$(PROG).1
uninstall:
rm -f $(DESTDIR)$(sbindir)/$(PROG)
rm -f $(DESTDIR)$(mandir)/man1/$(PROG).1
lint: $(GENSRC)
lint -hbxn $(SRC) | \
grep -v 'struct/union .* never defined' | \
grep -v 'possible pointer alignment problem'
clean:
rm -f $(CLEANFILES)
distclean:
rm -f $(CLEANFILES) Makefile config.cache config.log config.status \
config.h gnuc.h os-proto.h stamp-h stamp-h.in
tags: $(TAGFILES)
ctags -wtd $(TAGFILES)
tar:
@cwd=`pwd` ; dir=`basename $$cwd` ; name=$(PROG)-`cat VERSION` ; \
list="" ; tar="tar chf" ; \
for i in `cat FILES` ; do list="$$list $$name/$$i" ; done; \
echo \
"rm -f ../$$name; ln -s $$dir ../$$name" ; \
rm -f ../$$name; ln -s $$dir ../$$name ; \
echo \
"(cd .. ; $$tar - [lots of files]) | compress > /tmp/$$name.tar.Z" ; \
(cd .. ; $$tar - $$list) | compress > /tmp/$$name.tar.Z ; \
echo \
"rm -f ../$$name" ; \
rm -f ../$$name
depend: $(GENSRC)
${srcdir}/mkdep -c $(CC) $(DEFS) $(INCLS) $(SRC)