tcpdump/print-lane.c
assar 069d6e270a remove <netinet/tcpip.h>. including this header causes errors with
Kame V6 stack and nothing from it was used anyway.
2000-01-09 09:59:15 +00:00

148 lines
3.8 KiB
C

/*
* Marko Kiiskila carnil@cs.tut.fi
*
* Tampere University of Technology - Telecommunications Laboratory
*
* Permission to use, copy, modify and distribute this
* software and its documentation is hereby granted,
* provided that both the copyright notice and this
* permission notice appear in all copies of the software,
* derivative works or modified versions, and any portions
* thereof, that both notices appear in supporting
* documentation, and that the use of this software is
* acknowledged in any publications resulting from using
* the software.
*
* TUT ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION AND DISCLAIMS ANY LIABILITY OF ANY KIND FOR
* ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
* SOFTWARE.
*
*/
#ifndef lint
static const char rcsid[] =
"@(#) $Header: /tcpdump/master/tcpdump/print-lane.c,v 1.3 2000-01-09 10:00:22 assar Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <sys/param.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <net/if.h>
#include <netinet/in.h>
#include <netinet/if_ether.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
#include <netinet/tcp.h>
#include <stdio.h>
#include <pcap.h>
#include "interface.h"
#include "addrtoname.h"
#include "lane.h"
static const u_char *packetp;
static const u_char *snapend;
static inline void
lane_print(register const u_char *bp, int length)
{
register const struct lecdatahdr_8023 *ep;
ep = (const struct lecdatahdr_8023 *)bp;
if (qflag)
(void)printf("lecid:%d %s %s %d: ",
ntohs(ep->le_header),
etheraddr_string(ep->h_source),
etheraddr_string(ep->h_dest),
length);
else
(void)printf("lecid:%d %s %s %s %d: ",
ntohs(ep->le_header),
etheraddr_string(ep->h_source),
etheraddr_string(ep->h_dest),
etherproto_string(ep->h_type),
length);
}
/*
* This is the top level routine of the printer. 'p' is the points
* to the ether header of the packet, 'h->tv' is the timestamp,
* 'h->length' is the length of the packet off the wire, and 'h->caplen'
* is the number of bytes actually captured.
*/
void
lane_if_print(u_char *user, const struct pcap_pkthdr *h, const u_char *p)
{
int caplen = h->caplen;
int length = h->len;
struct lecdatahdr_8023 *ep;
u_short ether_type;
u_short extracted_ethertype;
ts_print(&h->ts);
if (caplen < sizeof(struct lecdatahdr_8023)) {
printf("[|lane]");
goto out;
}
if (eflag)
lane_print(p, length);
/*
* Some printers want to get back at the ethernet addresses,
* and/or check that they're not walking off the end of the packet.
* Rather than pass them all the way down, we set these globals.
*/
packetp = p;
snapend = p + caplen;
length -= sizeof(struct lecdatahdr_8023);
caplen -= sizeof(struct lecdatahdr_8023);
ep = (struct lecdatahdr_8023 *)p;
p += sizeof(struct lecdatahdr_8023);
ether_type = ntohs(ep->h_type);
/*
* Is it (gag) an 802.3 encapsulation?
*/
extracted_ethertype = 0;
if (ether_type < ETHERMTU) {
/* Try to print the LLC-layer header & higher layers */
if (llc_print(p, length, caplen, ep->h_source,ep->h_dest)==0) {
/* ether_type not known, print raw packet */
if (!eflag)
lane_print((u_char *)ep, length);
if (extracted_ethertype) {
printf("(LLC %s) ",
etherproto_string(htons(extracted_ethertype)));
}
if (!xflag && !qflag)
default_print(p, caplen);
}
} else if (ether_encap_print(ether_type, p, length, caplen) == 0) {
/* ether_type not known, print raw packet */
if (!eflag)
lane_print((u_char *)ep, length + sizeof(*ep));
if (!xflag && !qflag)
default_print(p, caplen);
}
if (xflag)
default_print(p, caplen);
out:
putchar('\n');
}