with the tag '\summary:' for greping.
Remark: Currently some printers have no summary line.
Moreover:
Summarize all printers with a single line in INSTALL.txt
Have llc_print() return the length of the LLC header, plus the length of
the SNAP header, if available - or, if it couldn't dissect the payload,
return the *negative* of that sum. Use that return value in link-layer
printers.
Don't print LLC header information for SNAP packets; if we have a SNAP
header, just call snap_print() and return its return value, regardless
of whether it's 1 or 0, don't fall into the code to print raw LLC header
information - and don't print it with -e, either.
If llc_print() returns 0, just call the default packet printer, don't
print the MAC-layer header or the extracted ethertype - llc_print() will
print the source and destination MAC addresses and whatever type
information is in the LLC or SNAP headers.
If we don't know the DSAP/LSAP, and it's an information frame (numbered
or not) and not an XID frame, return 0, so that we give a hex dump of
the raw payload.
In addition, print the length when printing SNAP header information with
-e.
The purpose of this macro was to enable the file-by-file switch to NDO,
after which only tcpdump.c had a use of it and the definitions guarded
by it. Update tcpdump.c not to require them any more and dismiss the
unused definitions.
Both interface.h and netdissect.h include <pcap.h>, thus most files
should not include it regardless if these need it or not. The only
exceptions so far remain:
* addrtoname.c
* missing/datalinks.c
* missing/dlnames.c
* tcpdump.c
Remove lots of $Header's and a few $Id's that all belong to the former
CVS repository of tcpdump itself. These keywords have been frozen since
the migration to git in late 2008.
link-layer print routines if no other print routine claimed the packet.
Test whether that flag is set rather than testing whether neither of -x
or -q were specified, and have -x, -q, *and* -X set that flag, so that
-X suppresses it just as -x does. That way you don't get those pckets
dumped twice if -X was specified.
appropriately, and that GNUmakefile and the MSVC++ project file define
it apppriately, as we do with libpcap, rather than defining it in
"interface.h".
Undo the rcsid-shuffling and addition of extra #includes, as we no
longer need to arrange that "interface.h" be included before using _U_
in an RCS ID or copyright.
use "_U_" in the definitions of "rcsid[]", to eliminate
complaints about those variables being unused;
move the definitions after the include of "interface.h", or add
an include of "interface.h", so that "_U_" is defined.
Include "config.h" before including "tcpdump-stdinc.h" in
"missing/datalinks.c".
tcpdump.c. Have if_print routines return the length of the link-layer
header, so that the common code knows how to skip the link-layer header
when printing the packet in hex/ASCII.
dissector really needs source and destination MAC addresses, we should
make global pointers to them - which would be null for packets lacking
MAC addresses, so dissectors that need them will need to do something
sensible if those pointers are null.)
Don't fake up an Ethernet header if there aren't any MAC addresses to
use when faking it up.
"bp_chaddr" in "print-bootp.c" is an array, so "bp->bp_chaddr" cannot be
null, and there's no need to test for it not being null.
unused-parameter problems reported by GCC. Add an _U_ tag to label
parameters as unused if the function is called through a pointer (so
that you can't change its signature by removing parameters) or if there
are unused parameters only because the function isn't complete.
Add some additional bounds checks the necessity for which was revealed
while cleaning up unused-parameter problems.
Make some routines static.
"lcp_print()", defined in "print-lcp.c", isn't called anywhere -
"print-ppp.c" has the code to dissect LCP. Get rid of "print-lcp.c".
apparently (as per the previous version of this code) either an 802.2
LLC header (as per RFC 1483 and RFC 2225), or there's no header at all,
and just an IP packet.
As such, no link-layer header should be printed.
In addition, for packets with an LLC header, we should call the LLC
printer, rather than assuming that it's SNAP-encapsulated (RFC 1483
says they're not always SNAP-encapsulated) and printing the header
ourselves. For packets without an LLC header, we should just call the
IP print routine.
This means that the LLC print routine may be called with null source and
destination MAC addresses; make it handle them.
Use const more.
Use EXTRACT_* macros more.
Use TCHECK* more.
Use tok2str() to replace some home-grown workalikes.
smb:
- Get rid of private types, use tcpdump-defined types
- Rename fdata and fdata1 to smb_fdata and smb_fdata1 to avoid conflict
with IRIX library function.
Split the Cisco HDLC printer into "chdlc_if_print()", which does the
stuff expected of a low-level print routine (printing the time stamp,
printing the final newline, doing the infodelay stuff) and
"chdlc_print()", which doesn't do that stuff. This lets us clean up
"ppp_hdlc_if_print()" a bit - it can just print the time stamp at the
beginning, and do the infodelay stuff at the end, without having to
treat Cisco HDLC specially by skipping the time stamp printing. (This
also ensures that the time stamp is always printed, which wasn't the
case before.)
Print the missing final newline in "pppoe_if_print()".
them in "print-sll.c" - as a cooked-mode capture may be reading from
non-Ethernet, non-802.x devices, it may well see some
ETH_P_/LINUX_SLL_P_ types that don't mean "this is an 802.2 LLC frame".
We currently assume that the ETH_P_ values won't change in the kernel,
so we don't have to explicitly map them.
In various link-layer packet printers, if we don't handle the next layer
up of packet type, and are printing the link-layer header, use the
correct pointer to that header (i.e., if we've stepped "p" past the
link-layer header, don't use "p", use a pointer to the beginning of the
packet), and use the correct length (i.e., if we've subtracted the
length of the link-layer header, add it back in, so that we always print
the full packet length).
dissectors that expected calls to "llc_print()" to set it. (Thanks and
a tip of the hat to Olaf Kirch <okir@caldera.de> for noticing this.)
Make "ether_encap_print()" and "llc_print()" take a pointer to an
extracted-Ethertype variable as an argument, have "llc_print()" pass it
to "ether_encap_print()", and have "ether_encap_print()" set what it
points to rather than setting a static "extracted_ethertype" variable.
Get rid of said static "extracted_ethertype" variable in favor of one
local to "ether_if_print()", just as other link-layer dissectors have
local "extracted_ethertype" variables.
have dissectors include them rather than <netinet/ip.h> or
<netinet/ip_var.h>, if they actually need that stuff.
Put the declarations of the ICMP stuff directly into "print-icmp.c".
Remove all unnecessary includes of <netinet/ip*.h> files.
Copy the byte-order stuff from "nameser.h" into "tcp.h".
by dissectors, and have dissectors include them rather than
<netinet/udp.h>, <netinet/udp_var.h>, or <netinet/tcp.h>, if they
actually need that stuff.
Remove all unnecessary includes of <netinet/udp*.h> or <netinet/tcp*.h>
files.
"linux-includes/netinet/if_ether.h" to "ethertype.h".
Move other stuff used by dissectors from <netinet/if_ether.h> to
"ether.h", along the lines of "fddi.h" and "token.h".
Move ARP declarations from BSD include files to "print-arp.c".
Remove from dissectors includes of <netinet/if_ether.h>, and add
includes of "ethertype.h" and/or "ether.h" as necessary.
Get rid of configuration options that test declarations now made in
"ether.h" or "print-arp.c", as those declarations are now under our
control, not the OS's control.
