The exceptions are currently:
Some EXTRACT_ in print-juniper.c, not used on packet buffer pointer.
An EXTRACT_BE_U_3 in addrtoname.c, not always used on packet buffer
pointer.
This can prevent bizarre failures if, for example, you've done a
configuration in the top-level source directory, leaving behind one
config.h file, and then do an out-of-tree build in another directory,
with different configuration options. This way, we always pick up the
same config.h, in the build directory.
Now all the macros have a name meaning a count in bytes.
With _S_: signed, _U_: unsigned
e.g.:
EXTRACT_BE_32BITS -> EXTRACT_BE_U_4
EXTRACT_LE_32BITS -> EXTRACT_LE_U_4
...
EXTRACT_BE_INT32 -> EXTRACT_BE_S_4
and have:
EXTRACT_8BITS -> EXTRACT_U_1
EXTRACT_INT8 -> EXTRACT_S_1
This fixes a buffer over-read discovered by Kamil Frankowicz.
Don't pass the remaining caplen - that's too hard to get right, and we
were getting it wrong in at least one case; just use ND_TTEST().
Add a test using the capture file supplied by the reporter(s).
Prevent a possible buffer overread in chdlc_print() and replace the
custom check in chdlc_if_print() with a standard check in chdlc_print()
so that the latter certainly does not over-read even when reached via
juniper_chdlc_print(). Add length checks.
In ethertype_print(), isoclns_print() and snap_print() adjust the length
arithmetics along the same lines as for ether_print() in the previous
commit. Where done, the current pointer is not greater than snapend so
that the difference (i.e. caplen) is never negative.
This does not fix a reported issue but the problem was very likely to be
there.
with the tag '\summary:' for greping.
Remark: Currently some printers have no summary line.
Moreover:
Summarize all printers with a single line in INSTALL.txt
The purpose of this macro was to enable the file-by-file switch to NDO,
after which only tcpdump.c had a use of it and the definitions guarded
by it. Update tcpdump.c not to require them any more and dismiss the
unused definitions.
Always define and declare ip6_print(), always compile print-ip6.c, and
always call it if we recognize a payload as IPv6. If INET6 isn't
defined, ip6_print() will just print the length and note that printing
isn't supported.
That way, we don't do weird dissection of IPv6 packets on systems
without IPv6 support, due to, for example, ethertype_print() returning 0
("not dissected") for IPv6 packets on those systems (IPv6-over-Frame
Relay was dissected weirdly due to this).
And, as we require at least autoconf 2.61, and as autoconf 2.61 and
later have AC_TYPE_UINTn_T and AC_TYPE_INTn_T macros, we use them to
define the uintN_t and intN_t macros if the system doesn't define them
for us.
This lets us get rid of bitypes.h as well.
Have them take a netdissect_options * argument, and get the "no name
resolution" flag from it.
Move the declaration of dnaddr_string to addrtoname.h, along with the
other XXX-to-string routines.
Both interface.h and netdissect.h include <pcap.h>, thus most files
should not include it regardless if these need it or not. The only
exceptions so far remain:
* addrtoname.c
* missing/datalinks.c
* missing/dlnames.c
* tcpdump.c
Remove lots of $Header's and a few $Id's that all belong to the former
CVS repository of tcpdump itself. These keywords have been frozen since
the migration to git in late 2008.
Make sure all of them are declared const and most of them -- static.
Proper declaration of token arrays is a common review point for new code
that is based on existing decoders. Thus fix the issue at its root.
