link-layer print routines if no other print routine claimed the packet.
Test whether that flag is set rather than testing whether neither of -x
or -q were specified, and have -x, -q, *and* -X set that flag, so that
-X suppresses it just as -x does. That way you don't get those pckets
dumped twice if -X was specified.
used to do.
When printing the link-layer header, interpret the "-q" flag, and print
the packet length, similarly to the way the Ethernet print routine does.
appropriately, and that GNUmakefile and the MSVC++ project file define
it apppriately, as we do with libpcap, rather than defining it in
"interface.h".
Undo the rcsid-shuffling and addition of extra #includes, as we no
longer need to arrange that "interface.h" be included before using _U_
in an RCS ID or copyright.
use "_U_" in the definitions of "rcsid[]", to eliminate
complaints about those variables being unused;
move the definitions after the include of "interface.h", or add
an include of "interface.h", so that "_U_" is defined.
Include "config.h" before including "tcpdump-stdinc.h" in
"missing/datalinks.c".
aren't necessarily IP packets. Support several different versions of
AF_INET6 from various BSDs.
Handle OSI, AppleTalk, and IPX.
Handle unknown AF_ values the way unknown protocol types are handled in
other print routines - print the raw packet payload.
tcpdump.c. Have if_print routines return the length of the link-layer
header, so that the common code knows how to skip the link-layer header
when printing the packet in hex/ASCII.
beginning of the raw packet data, the captured length of the raw packet
data, and the length of the link-layer header, and:
if "-e" was specified, prints all the raw packet data;
if "-e" was not specified, prints all the raw packet data past
the link-layer header, if there is any.
Use that routine in all the "xxx_if_print()" routines if "-x" was
specified.
Make "arcnet_encap_print()" static - it's not used outside
"print-arcnet.c".
Add missing info printing code to "atm_if_print()".
Print the packet data in "lane_if_print()", not in "lane_print()", as
"lane_print()" can be called from other "xxx_if_print()" routines, and
those routines will also print the packet data if "-x" was specified -
no need to print it twice.
dissector really needs source and destination MAC addresses, we should
make global pointers to them - which would be null for packets lacking
MAC addresses, so dissectors that need them will need to do something
sensible if those pointers are null.)
Don't fake up an Ethernet header if there aren't any MAC addresses to
use when faking it up.
"bp_chaddr" in "print-bootp.c" is an array, so "bp->bp_chaddr" cannot be
null, and there's no need to test for it not being null.
unused-parameter problems reported by GCC. Add an _U_ tag to label
parameters as unused if the function is called through a pointer (so
that you can't change its signature by removing parameters) or if there
are unused parameters only because the function isn't complete.
Add some additional bounds checks the necessity for which was revealed
while cleaning up unused-parameter problems.
Make some routines static.
"lcp_print()", defined in "print-lcp.c", isn't called anywhere -
"print-ppp.c" has the code to dissect LCP. Get rid of "print-lcp.c".
Split the Cisco HDLC printer into "chdlc_if_print()", which does the
stuff expected of a low-level print routine (printing the time stamp,
printing the final newline, doing the infodelay stuff) and
"chdlc_print()", which doesn't do that stuff. This lets us clean up
"ppp_hdlc_if_print()" a bit - it can just print the time stamp at the
beginning, and do the infodelay stuff at the end, without having to
treat Cisco HDLC specially by skipping the time stamp printing. (This
also ensures that the time stamp is always printed, which wasn't the
case before.)
Print the missing final newline in "pppoe_if_print()".
may not be *our* byte order if we're reading a capture file from another
machine; we currently handle that by checking whether it looks like an
integer < 65536 or not and, if it's not, byte-swap it.
This also lets us handle OpenBSD DLT_LOOP as well - it's like DLT_NULL
except that the AF_ value is in *network* byte order.
(Old-style Linux loopback captures were also DLT_NULL, but the header
had an Ethernet type in it; there have also been captures where the
header was a PPP header. For now, we just continue to assume that all
DLT_NULL packets are IP, and check the IP version field to decide
whether it's IPv4, IPv6, or something else.
We may want to consider adopting Ethereal's heuristics, which would at
least mean we wouldn't be reporting bogus packet types for old-style
Linux loopback captures and those weird PPP - ISDN4BSD? - captures,
although the version of libpcap that goes with this version of tcpdump
doesn't produce bogus DLT_NULL captures for Linux loopback devices.)
"AF <n>" for DLT_NULL captures.
Print the packet length for DLT_NULL captures when "-e" is specified
(somebody complained on "freebsd-isp" about the lack of any packet
length from tcpdump when capturing traffic on a "tunX" device).
Make sure we always print the packet length on PPP when "-e" is
specified (the person in question also complained that the packet length
disappeared between FreeBSD 2.2.8 and FreeBSD 3.4, which was the result
of a new "print-ppp.c" that didn't print the length).
ip6.h is almost normal RFC2292 header.
icmp6.h has couple of extensions (not covered by RFC2292),
like MLD, ICMPv6 nodeinfo, and router renumber.
XXX how to synchronize with future kame changes?
have dissectors include them rather than <netinet/ip.h> or
<netinet/ip_var.h>, if they actually need that stuff.
Put the declarations of the ICMP stuff directly into "print-icmp.c".
Remove all unnecessary includes of <netinet/ip*.h> files.
Copy the byte-order stuff from "nameser.h" into "tcp.h".
by dissectors, and have dissectors include them rather than
<netinet/udp.h>, <netinet/udp_var.h>, or <netinet/tcp.h>, if they
actually need that stuff.
Remove all unnecessary includes of <netinet/udp*.h> or <netinet/tcp*.h>
files.
"linux-includes/netinet/if_ether.h" to "ethertype.h".
Move other stuff used by dissectors from <netinet/if_ether.h> to
"ether.h", along the lines of "fddi.h" and "token.h".
Move ARP declarations from BSD include files to "print-arp.c".
Remove from dissectors includes of <netinet/if_ether.h>, and add
includes of "ethertype.h" and/or "ether.h" as necessary.
Get rid of configuration options that test declarations now made in
"ether.h" or "print-arp.c", as those declarations are now under our
control, not the OS's control.
API.
* print-bgp.c: improve options printing. ugly code exists for
unaligned option parsing (need some fix).
* const poisoning in SMB decoder.
* make dump format back to original. someone may want to add an
option to do ascii printing, but keep the default behavior as is
for scripts used in many places.
* -Wall -Werror clean checks.
Hope I did not break anything. Portability on IPv4-only node needs checking,
I'll do this very soon. (sorry for rather jumbo commit)
XXx what is _FAVOR_BSD?
