It's a follow-up to commit 81dbf4a0b0.
There is no need to update ether_print(), ether_common_print() and
ether_switch_tag_print() to void functions: back to u_int functions.
There is also no need to add a flag parameter to ether_print(),
ether_common_print() and ether_switch_tag_print(): Remove it.
brcm_tag_if_print()
brcm_tag_prepend_if_print()
dsa_if_print()
edsa_if_print()
ether_if_print()
netanalyzer_if_print()
netanalyzer_transparent_if_print()
Update ether_print(), ether_common_print() and ether_switch_tag_print()
to void functions.
Add a flag parameter to ether_print(), ether_common_print() and
ether_switch_tag_print() to increment the link-layer header length field
of the netdissect_options when needed.
The calls use TRUE when the return value of the funtions was used.
The calls with FALSE avoid increments when the calls are nested.
Moreover:
Remove trailing "_if" from some protocol names.
Add a ND_BYTES_AVAILABLE_AFTER() macro to find the number of bytes
available in the captured data, starting at the byte pointed to by the
argument. It returns a u_int rather than a ptrdiff_t, so it'll be
32 bits on LP64 and LLP64 platforms as well as on ILP32 platforms. Use
that macro.
Make size-of-buffer arguments size_t.
Cast some size_t and ptrdiff_t values to u_int or int.
The exceptions are currently:
Some EXTRACT_ in print-juniper.c, not used on packet buffer pointer.
An EXTRACT_BE_U_3 in addrtoname.c, not always used on packet buffer
pointer.
This can prevent bizarre failures if, for example, you've done a
configuration in the top-level source directory, leaving behind one
config.h file, and then do an out-of-tree build in another directory,
with different configuration options. This way, we always pick up the
same config.h, in the build directory.
Now all the macros have a name meaning a count in bytes.
With _S_: signed, _U_: unsigned
e.g.:
EXTRACT_BE_32BITS -> EXTRACT_BE_U_4
EXTRACT_LE_32BITS -> EXTRACT_LE_U_4
...
EXTRACT_BE_INT32 -> EXTRACT_BE_S_4
and have:
EXTRACT_8BITS -> EXTRACT_U_1
EXTRACT_INT8 -> EXTRACT_S_1
This fixes a buffer over-read discovered by Kamil Frankowicz.
Don't pass the remaining caplen - that's too hard to get right, and we
were getting it wrong in at least one case; just use ND_TTEST().
Add a test using the capture file supplied by the reporter(s).
In ethertype_print(), isoclns_print() and snap_print() adjust the length
arithmetics along the same lines as for ether_print() in the previous
commit. Where done, the current pointer is not greater than snapend so
that the difference (i.e. caplen) is never negative.
This does not fix a reported issue but the problem was very likely to be
there.
In that function the "length" parameter means off-the-wire length, that
is, the length declared inside the outer header. The "caplen" parameter
means the amount of bytes actually available in the captured packet.
gre_print_0() and the functions modelled after it passed the value of
"length" instead of the value of "caplen", this could make ether_print()
access beyond the memory allocated for the captured packet. Brian
Carpenter had demonstrated this for the OTV case.
Fix the involved functions that call ether_print() to pass the correct
value and leave a comment to dismiss "caplen" later as its value can be
reliably derived from the other ether_print() parameters.
with the tag '\summary:' for greping.
Remark: Currently some printers have no summary line.
Moreover:
Summarize all printers with a single line in INSTALL.txt
Have our own routines to convert between IPv4/IPv6 addresses and
strings; that helps if, for example, we want to build binary versions of
tcpdump for Windows that can run both on NT 5 (W2K/WXP), which doesn't
have inet_ntop() or inet_pton(), and NT 6 (Vista/7/8/10), which do. It
also means that we don't require IPv6 library support on UN*X to print
addresses (if somebody wants to build tcpdump for older UN*Xes lacking
IPv6 support in the system library or in add-on libraries).
Get rid of files in the missing directory that we don't need, and
various no-longer-necessary autoconf tests.
The purpose of this macro was to enable the file-by-file switch to NDO,
after which only tcpdump.c had a use of it and the definitions guarded
by it. Update tcpdump.c not to require them any more and dismiss the
unused definitions.
Always define and declare ip6_print(), always compile print-ip6.c, and
always call it if we recognize a payload as IPv6. If INET6 isn't
defined, ip6_print() will just print the length and note that printing
isn't supported.
That way, we don't do weird dissection of IPv6 packets on systems
without IPv6 support, due to, for example, ethertype_print() returning 0
("not dissected") for IPv6 packets on those systems (IPv6-over-Frame
Relay was dissected weirdly due to this).
And, as we require at least autoconf 2.61, and as autoconf 2.61 and
later have AC_TYPE_UINTn_T and AC_TYPE_INTn_T macros, we use them to
define the uintN_t and intN_t macros if the system doesn't define them
for us.
This lets us get rid of bitypes.h as well.
Remove lots of $Header's and a few $Id's that all belong to the former
CVS repository of tcpdump itself. These keywords have been frozen since
the migration to git in late 2008.
For each decoder that has more than one instance of truncation signaling
and prints the same string in each instance make sure that the string is
declared as "static const char tstr[]" right after the initial includes
block. Where necessary, replace fputs(s, stdout) with equivalent
printf("%s", s).
Make sure all of them are declared const and most of them -- static.
Proper declaration of token arrays is a common review point for new code
that is based on existing decoders. Thus fix the issue at its root.
Instead of having the Ethernet-type handler process the VLAN and Alteon
jumbo frame Ethernet type values, process them in the Ethernet (and
Linux cooked-mode) dissectors. This makes it easier for the right MAC
addresses to be printed for those packets.
As part of that, rename ether_encap_print() to ethertype_print() - it
doesn't print encapsulated Ethernet frames, it prints payloads whose
packet type is indicated by an Ethernet type field value - and remove
the no-longer-needed "extracted Ethernet type" argument. That also lets
us eliminate it from the SNAP print routine.
Make ether_print() take a function, and an argument to pass to that
function, as parameters, so that, for example, the ATM LANE printer can
use it and put the LEC ID into the link-layer headeer printout.
