mirrors/tcpdump
0
0
Fork 0
mirror of https://github.com/the-tcpdump-group/tcpdump.git synced 2024-11-24 10:33:28 +08:00
Code Issues Packages Projects Releases Wiki Activity
c2f6833ddd
tcpdump/tests/vrrp-v.out

267 lines
32 KiB
Plaintext
Raw Normal View History

VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.91 > 224.0.0.18: vrrp 10.0.0.91 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 191, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.91 > 224.0.0.18: vrrp 10.0.0.91 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 191, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.91 > 224.0.0.18: vrrp 10.0.0.91 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 191, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.91 > 224.0.0.18: vrrp 10.0.0.91 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 191, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.91 > 224.0.0.18: vrrp 10.0.0.91 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 191, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe66:cf60 > ff02::12: ip-proto-112 40
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe66:cf60 > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.91 > 224.0.0.18: vrrp 10.0.0.91 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 191, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.91 > 224.0.0.18: vrrp 10.0.0.91 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 191, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.91 > 224.0.0.18: vrrp 10.0.0.91 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 191, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe66:cf60 > ff02::12: ip-proto-112 88
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe66:cf60 > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.91 > 224.0.0.18: vrrp 10.0.0.91 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 191, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.92 > 224.0.0.18: vrrp 10.0.0.92 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 192, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.92 > 224.0.0.18: vrrp 10.0.0.92 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 192, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.92 > 224.0.0.18: vrrp 10.0.0.92 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 192, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe66:cf60 > ff02::12: ip-proto-112 40
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe66:cf60 > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.92 > 224.0.0.18: vrrp 10.0.0.92 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 192, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.92 > 224.0.0.18: vrrp 10.0.0.92 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 192, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.92 > 224.0.0.18: vrrp 10.0.0.92 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 192, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe72:b1da > ff02::12: ip-proto-112 88
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe72:b1da > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.92 > 224.0.0.18: vrrp 10.0.0.92 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 192, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.92 > 224.0.0.18: vrrp 10.0.0.92 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 192, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.92 > 224.0.0.18: vrrp 10.0.0.92 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 192, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe72:b1da > ff02::12: ip-proto-112 40
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe72:b1da > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 193, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 193, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 193, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe72:b1da > ff02::12: ip-proto-112 88
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe72:b1da > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 193, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 193, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe66:cf65 > ff02::12: ip-proto-112 88
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe66:cf65 > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 193, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 193, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 193, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe66:cf65 > ff02::12: ip-proto-112 88
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe66:cf65 > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 193, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 193, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 193, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe66:cf65 > ff02::12: ip-proto-112 88
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe66:cf65 > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.93 > 224.0.0.18: vrrp 10.0.0.93 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 193, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 194, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 194, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 194, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe66:cf65 > ff02::12: ip-proto-112 88
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe66:cf65 > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 194, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 194, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe65:d45c > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 194, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe65:d45c > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 194, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 194, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 194, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe65:d45c > ff02::12: ip-proto-112 40
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe65:d45c > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 194, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 194, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe65:d45c > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 194, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe65:d45c > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 194, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 194, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.94 > 224.0.0.18: vrrp 10.0.0.94 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 194, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe65:d45c > ff02::12: ip-proto-112 40
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe65:d45c > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 195, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 195, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 195, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe65:d45c > ff02::12: ip-proto-112 40
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe65:d45c > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 195, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 195, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 195, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe65:d46b > ff02::12: ip-proto-112 40
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe65:d46b > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 195, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 195, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe65:d46b > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 195, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe65:d46b > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 195, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 195, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.95 > 224.0.0.18: vrrp 10.0.0.95 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 195, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe65:d46b > ff02::12: ip-proto-112 40
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe65:d46b > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 196, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 196, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 196, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe65:d46b > ff02::12: ip-proto-112 40
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe65:d46b > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 196, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 196, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe72:b1e4 > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 196, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe72:b1e4 > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 196, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 196, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe72:b1e4 > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 196, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe72:b1e4 > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 196, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 196, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe72:b1e4 > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 196, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe72:b1e4 > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 196, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 196, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe72:b1e4 > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.96 > 224.0.0.18: vrrp 10.0.0.96 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 196, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe72:b1e4 > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 197, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 197, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 197, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::d6ca:6dff:fe72:b1e4 > ff02::12: ip-proto-112 40
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::d6ca:6dff:fe72:b1e4 > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 197, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 197, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 197, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 197, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 197, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 197, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 197, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 197, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 197, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 197, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 197, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 197, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 197, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 197, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 197, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 197, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 197, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 197, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 197, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 197, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 197, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 197, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 197, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP6 (hlim 255, next-header VRRP (112) payload length: 40) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 40
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 36)
VRRP: top off the previous change Update the test cases and squelch a compiler warning.
2014-03-06 06:48:55 +08:00
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv3, Advertisement, vrid 44, prio 197, intvl 1000cs, length 16, addrs(2): 10.4.44.100,10.4.44.200
VRRP: add a sample capture and two test cases The sample capture consists of VRRPv2/IPv4, VRRPv3/IPv4 and VRRPv3/IPv6 packets. It was produced using 7 MikroTik devices running RouterOS 6.10 and configured for the same set of virtual addresses with different priorities per device. The devices were powered on one after another with a ~30 seconds delay in the order of VRRP priority ascending. The test cases decode the capture with and without "-v".
2014-03-06 06:31:25 +08:00
IP6 (hlim 255, next-header VRRP (112) payload length: 88) fe80::20c:42ff:fe5e:c2dc > ff02::12: ip-proto-112 88
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 48)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 42, prio 197, authtype simple, intvl 10s, length 28, addrs(3): 10.4.42.1,10.4.42.2,10.4.42.3 auth "abcdefgh"
IP (tos 0x0, ttl 255, id 4660, offset 0, flags [none], proto VRRP (112), length 40)
10.0.0.97 > 224.0.0.18: vrrp 10.0.0.97 > 224.0.0.18: VRRPv2, Advertisement, vrid 43, prio 197, authtype none, intvl 10s, length 20, addrs: 10.4.43.150
Reference in New Issue Copy Permalink