systemd/man/sd_event_add_signal.xml
Tom Gundersen 12b42c7667 man: revert dynamic paths for split-usr setups
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.

 * by adjusting the path to binaries, but not do the same thing to the
   search path we end up with inconsistent man-pages. Adjusting the search
   path too would be quite messy, and it is not at all obvious that this is
   worth the effort, but at any rate it would have to be done before we
   could ship this.

 * this means that distributed man-pages does not make sense as they depend
   on config options, and for better or worse we are still distributing
   man pages, so that is something that definitely needs sorting out before
   we could ship with this patch.

 * we have long held that split-usr is only minimally supported in order
   to boot, and something we hope will eventually go away. So before we start
   adding even more magic/effort in order to make this work nicely, we should
   probably question if it makes sense at all.
2015-06-18 19:47:44 +02:00

199 lines
7.4 KiB
XML
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<!--
This file is part of systemd.
Copyright 2014 Zbigniew Jędrzejewski-Szmek
systemd is free software; you can redistribute it and/or modify it
under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
<refentry id="sd_event_add_signal">
<refentryinfo>
<title>sd_event_add_signal</title>
<productname>systemd</productname>
<authorgroup>
<author>
<contrib>More text</contrib>
<firstname>Zbigniew</firstname>
<surname>Jędrzejewski-Szmek</surname>
<email>zbyszek@in.waw.pl</email>
</author>
</authorgroup>
</refentryinfo>
<refmeta>
<refentrytitle>sd_event_add_signal</refentrytitle>
<manvolnum>3</manvolnum>
</refmeta>
<refnamediv>
<refname>sd_event_add_signal</refname>
<refname>sd_event_source_get_signal</refname>
<refpurpose>Add a signal event source to an event loop</refpurpose>
</refnamediv>
<refsynopsisdiv>
<funcsynopsis>
<funcsynopsisinfo>#include &lt;systemd/sd-bus.h&gt;</funcsynopsisinfo>
<funcprototype>
<funcdef>int <function>sd_event_add_signal</function></funcdef>
<paramdef>sd_event *<parameter>event</parameter></paramdef>
<paramdef>sd_event_source **<parameter>source</parameter></paramdef>
<paramdef>int <parameter>signal</parameter></paramdef>
<paramdef>sd_event_signal_handler_t <parameter>handler</parameter></paramdef>
<paramdef>void *<parameter>userdata</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>typedef int (*<function>sd_event_signal_handler_t</function>)</funcdef>
<paramdef>sd_event_source *<parameter>s</parameter></paramdef>
<paramdef>const struct signalfd_siginfo *<parameter>si</parameter></paramdef>
<paramdef>void *<parameter>userdata</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_event_source_get_signal</function></funcdef>
<paramdef>sd_event_source *<parameter>source</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para><function>sd_event_add_signal()</function> adds a new signal
event source to an event loop object. The event loop is specified
in <parameter>event</parameter>, the event source is returned in
the <parameter>source</parameter> parameter. The
<parameter>signal</parameter> parameter specifies the signal to be handled
(see
<citerefentry project='man-pages'><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry>).
The <parameter>handler</parameter> must reference a function to
call when the signal is delivered or be <constant>NULL</constant>.
The handler function will be passed the
<parameter>userdata</parameter> pointer, which may be chosen
freely by the caller. The handler also receives a pointer to a
<structname>const struct signalfd_siginfo</structname> containing
the information about the received signal. See
<citerefentry project='man-pages'><refentrytitle>signalfd</refentrytitle><manvolnum>2</manvolnum></citerefentry>
for further information.</para>
<para>Only a single handler may be installed for a specific
signal. The signal will be unblocked, and must be
blocked when the function is called. If the handler is not
specified (<parameter>handler</parameter> is
<constant>NULL</constant>), a default handler which causes the
program to exit will be used. By default, the handler is enabled
permanently (<constant>SD_EVENT_ON</constant>), but this may be
changed with
<citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
If the handler function returns a negative error code, it will be
disabled after the invocation, even if
<constant>SD_EVENT_ON</constant> mode is set.
</para>
<para><function>sd_event_source_get_signal()</function> retrieves
the configured signal number of a signal event source created
previously with <function>sd_event_add_signal()</function>. It
takes the event source object as the <parameter>source</parameter>
parameter.</para>
</refsect1>
<refsect1>
<title>Return Value</title>
<para>On success, these functions return 0 or a positive
integer. On failure, they return a negative errno-style error
code. </para>
</refsect1>
<refsect1>
<title>Errors</title>
<para>Returned errors may indicate the following problems:</para>
<variablelist>
<varlistentry>
<term><constant>-ENOMEM</constant></term>
<listitem><para>Not enough memory to allocate an object.</para></listitem>
</varlistentry>
<varlistentry>
<term><constant>-EINVAL</constant></term>
<listitem><para>An invalid argument has been passed.</para></listitem>
</varlistentry>
<varlistentry>
<term><constant>-EBUSY</constant></term>
<listitem><para>An handler is already installed for this
signal or the signal was not blocked previously.</para></listitem>
</varlistentry>
<varlistentry>
<term><constant>-ESTALE</constant></term>
<listitem><para>The event loop is already terminated.</para></listitem>
</varlistentry>
<varlistentry>
<term><constant>-ECHILD</constant></term>
<listitem><para>The event loop has been created in a different process.</para></listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Notes</title>
<para><function>sd_event_add_signal()</function> and the other functions
described here are available as a shared library, which can be
compiled and linked to with the
<constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry>
file.</para>
</refsect1>
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>
</para>
</refsect1>
</refentry>