systemd/man/systemd-soft-reboot.service.xml

<?xml version='1.0'?> <!--*-nxml-*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->

<refentry id="systemd-soft-reboot.service"
    xmlns:xi="http://www.w3.org/2001/XInclude">

  <refentryinfo>
    <title>systemd-soft-reboot.service</title>
    <productname>systemd</productname>
  </refentryinfo>

  <refmeta>
    <refentrytitle>systemd-soft-reboot.service</refentrytitle>
    <manvolnum>8</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>systemd-soft-reboot.service</refname>
    <refpurpose>Userspace reboot operation</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <para><filename>systemd-soft-reboot.service</filename></para>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para><filename>systemd-soft-reboot.service</filename> is a system service that is pulled in by
    <filename>soft-reboot.target</filename> and is responsible for performing a userspace-only reboot
    operation. When invoked, it will send the <constant>SIGTERM</constant> signal to any processes left
    running (but does not wait for the processes to exit), and follow up with <constant>SIGKILL</constant>.
    If the <filename>/run/nextroot/</filename> directory exists (which may be a regular directory, a
    directory mount point or a symlink to either) then it will switch the file system root to it. It then
    reexecutes the service manager off the (possibly now new) root file system, which will enqueue a new boot
    transaction as in a normal reboot.</para>

    <para>Such a userspace-only reboot operation permits updating or resetting the entirety of userspace with
    minimal downtime, as the reboot operation does <emphasis>not</emphasis> transition through:</para>

    <itemizedlist>
      <listitem><para>The second phase of regular shutdown, as implemented by
      <citerefentry><refentrytitle>systemd-shutdown</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para></listitem>

      <listitem><para>The third phase of regular shutdown, i.e. the return to the initrd context.
      </para></listitem>

      <listitem><para>The hardware reboot operation.</para></listitem>

      <listitem><para>The firmware initialization.</para></listitem>

      <listitem><para>The boot loader initialization.</para></listitem>

      <listitem><para>The kernel initialization.</para></listitem>

      <listitem><para>The initrd initialization.</para></listitem>
    </itemizedlist>

    <para>However this form of reboot comes with drawbacks as well:</para>

    <itemizedlist>
      <listitem><para>The OS update remains incomplete, as the kernel is not reset and continues
      running.</para></listitem>

      <listitem><para>Kernel settings (such as <filename>/proc/sys/</filename> settings, a.k.a. "sysctl", or
      <filename>/sys/</filename> settings) are not reset.</para></listitem>
    </itemizedlist>

    <para>These limitations may be addressed by various means, which are outside of the scope of this
    documentation, such as kernel live-patching and sufficiently comprehensive
    <filename>/etc/sysctl.d/</filename> files.</para>
  </refsect1>

  <refsect1>
    <title>Resource Pass-Through</title>

    <para>Various runtime OS resources can passed from a system runtime to the next, through the userspace
    reboot operation. Specifically:</para>

    <itemizedlist>
      <listitem><para>File descriptors placed in the file descriptor store of services that remain active
      until the very end are passed to the next boot, where they are placed in the file descriptor store of
      the same unit. For this to work, units must declare <varname>DefaultDependencies=no</varname> (and
      avoid a manual <varname>Conflicts=shutdown.target</varname> or similar) to ensure they are not
      terminated as usual during the system shutdown operation. Alternatively, use
      <varname>FileDescriptorStorePreserve=</varname> to allow the file descriptor store to remain pinned
      even when the unit is down. See
      <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
      details about the file descriptor store.</para></listitem>

      <listitem><para>Similar to this, file descriptors associated with <filename>.socket</filename> units
      remain open (and connectible) if the units are not stopped during the transition. (Achieved by
      <varname>DefaultDependencies=no</varname>.)</para></listitem>

      <listitem><para>The <filename>/run/</filename> file system remains mounted and populated and may be
      used to pass state information between such userspace reboot cycles.</para></listitem>

      <listitem><para>Service processes may continue to run over the transition, past soft-reboot and into
      the next session, if they are placed in services that remain active until the very end of shutdown
      (which again is achieved via <varname>DefaultDependencies=no</varname>). They must also be set up to
      avoid being killed by the aforementioned <constant>SIGTERM</constant> and <constant>SIGKILL</constant>
      via <varname>SurviveFinalKillSignal=yes</varname>, and also be configured to avoid being stopped on
      isolate via <varname>IgnoreOnIsolate=yes</varname>. They also have to be configured to be stopped on
      normal shutdown, reboot and maintenance mode. Finally, they have to be ordered after
      <constant>basic.target</constant> to ensure correct ordering on boot. Note that in case any new or
      custom units are used to isolate to, or that implement an equivalent shutdown functionality, they will
      also have to be configured manually for correct ordering and conflicting. For example:</para>

      <programlisting>[Unit]
Description=My Surviving Service
SurviveFinalKillSignal=yes
IgnoreOnIsolate=yes
DefaultDependencies=no
After=basic.target
Conflicts=reboot.target kexec.target poweroff.target halt.target rescue.target emergency.target
Before=shutdown.target rescue.target emergency.target

[Service]
Type=oneshot
ExecStart=sleep infinity</programlisting>
      </listitem>

      <listitem><para>On top of the above, templated units also need a configuration file for their slice, as
      they by default use a slice named after the non-templated part of the unit. For example, for a
      <filename>foo@test.service</filename> instance, a <filename>system-foo.slice</filename> unit may be
      added with the following content:</para>

      <programlisting>[Unit]
SurviveFinalKillSignal=yes
IgnoreOnIsolate=yes
DefaultDependencies=no</programlisting>
      </listitem>

      <listitem><para>File system mounts may remain mounted during the transition, and complex storage
      attached, if configured to remain until the very end of the shutdown process. (Also achieved via
      <varname>DefaultDependencies=no</varname>, and by avoiding
      <varname>Conflicts=umount.target</varname>)</para></listitem>

      <listitem><para>If the unit publishes a service over D-Bus, the connection needs to be re-established
      after soft-reboot as the D-Bus broker will be stopped and then started again. When using the sd-bus
      library this can be achieved by adapting the following example.
      <programlisting><xi:include href="sd_bus_service_reconnect.c" parse="text"/></programlisting>
      </para></listitem>
    </itemizedlist>

    <para>Even though passing resources from one soft reboot cycle to the next is possible this way, we
    strongly suggest to use this functionality sparingly only, as it creates a more fragile system as
    resources from different versions of the OS and applications might be mixed with unforeseen
    consequences. In particular it's recommended to <emphasis>avoid</emphasis> allowing processes to survive
    the soft reboot operation, as this means code updates will necessarily be incomplete, and processes
    typically pin various other resources (such as the file system they are backed by), thus increasing
    memory usage (as two versions of the OS/application/file system might be kept in memory). Leaving
    processes running during a soft-reboot operation requires disconnecting the service comprehensively from
    the rest of the OS, i.e. minimizing IPC and reducing sharing of resources with the rest of the OS. A
    possible mechanism to achieve this is the concept of <ulink
    url="https://systemd.io/PORTABLE_SERVICES">Portable Services</ulink>, but make sure no resource from the
    host's OS filesystems is pinned via <varname>BindPaths=</varname> or similar unit settings, otherwise the
    old, originating filesystem will remain mounted as long as the unit is running.</para>
  </refsect1>

  <refsect1>
    <title>Notes</title>

    <para>Note that because
    <citerefentry><refentrytitle>systemd-shutdown</refentrytitle><manvolnum>8</manvolnum></citerefentry> is
    not executed, the executables in <filename>/usr/lib/systemd/system-shutdown/</filename> are not executed
    either.</para>

    <para>Note that <filename>systemd-soft-reboot.service</filename> (and related units) should never be
    executed directly. Instead, trigger system shutdown with a command such as <literal>systemctl
    soft-reboot</literal>.</para>

    <para>Note that if a new root file system has been set up on <literal>/run/nextroot/</literal>, a
    <command>soft-reboot</command> will be performed when the <command>reboot</command> command is
    invoked.</para>
  </refsect1>

  <refsect1>
    <title>See Also</title>
    <para><simplelist type="inline">
      <member><citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry></member>
      <member><citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry></member>
      <member><citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry></member>
      <member><citerefentry><refentrytitle>systemd-poweroff.service</refentrytitle><manvolnum>8</manvolnum></citerefentry></member>
      <member><citerefentry><refentrytitle>systemd-suspend.service</refentrytitle><manvolnum>8</manvolnum></citerefentry></member>
      <member><citerefentry><refentrytitle>bootup</refentrytitle><manvolnum>7</manvolnum></citerefentry></member>
    </simplelist></para>
  </refsect1>

</refentry>