systemd/TODO
2011-04-07 21:35:37 +02:00

253 lines
8.9 KiB
Plaintext

F15:
* swap units that are activated by one name but shown in the kernel under another are semi-broken
* NFS, networkmanager ordering issue (PENDING)
* NM should pull in network.target (PENDING)
https://bugzilla.redhat.com/show_bug.cgi?id=692008
* ntpd should pull in time-sync.target. (PENDING)
* bluetooth should be possible to disable (PENDING)
* add fstab fields to add wait timeouts, change Wants to Requires by local-fs.target
* hook emergency.target into local-fs.target in some way as OnFailure with isolate, add warning log message
* bind mounts are ignored
https://bugzilla.redhat.com/show_bug.cgi?id=682662
* 0595f9a1c182a84581749823ef47c5f292e545f9 is borked, freezes shutdown
(path: after installing inotify watches, recheck file again to fix race)
* active_enter timestamps borked?
Features:
* fix alsa mixer restore to not print error when no config is stored
* don't trim empty cgroups
https://bugzilla.redhat.com/show_bug.cgi?id=678555
* show enablement status in systemctl status
* write blog stories about:
- chroot, nspawn and friends
- the blame game: systemd-analyze
- enabling dbus services
- status update
* allow port = 0 in .socket units
* rename systemd-logger to systemd-stdio-syslog-bridge
* introduce /usr/lib/binfmt.d/, /usr/lib/tmpfiles.d/
* in pam_systemd: don't rely on /proc/self/loginuid in a container (check if audit caps are there)
* take BSD file lock on tty devices when using them?
* tmpfiles should allow two identical lines
https://bugzilla.redhat.com/show_bug.cgi?id=690253
* avoid any flag files, or readahead files in /, we need to support r/o /
or / on tmpfs like Android setups.
* teach dbus to activate all services it finds in /etc/systemd/services/org-*.service
* get process transport into dbus for systemctl -P/-H
* document default dependencies
* support systemd.whitelist=/systemd.blacklist= on the kernel command
line.
* Find a way to replace /var/run, /var/lock directories with
symlinks during an RPM package upgrade (filesystem.rpm or systemd.rpm).
We soon want to get rid of var-run.mount var-lock.mount units.
* when key file cannot be found, read it from kbd in cryptsetup
* add switch to systemctl to show enabled but not running services. Or
another switch that shows service that have been running since
booting but aren't running anymore.
* reuse mkdtemp namespace dirs in /tmp?
* don't strip facility from kmsg log messages as soon as that is possible:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=9d90c8d9cde929cbc575098e825d7c29d9f45054
* recreate systemd's D-Bus private socket file on SIGUSR2
* be more specific what failed:
...
Unmounting file systems.
Not all file systems unmounted, 1 left.
Disabling swaps.
Detaching loop devices.
Detaching DM devices.
Cannot finalize remaining file systems and devices, trying to kill remaining processes.
Unmounting file systems.
Not all file systems unmounted, 1 left.
Cannot finalize remaining file systems and devices, giving up.
...
* check for compiled-in, but not active selinux, and don't print any warnings
about policy loading. Probably check for available selinux in /proc/filesystems,
and check for active selinux with getcon_raw() == "kernel"
* optionally create watched directories in .path units
* Support --test based on current system state
* consider services with no [Install] section and stored in /lib enabled by "systemctl is-enabled"
* consider services with any kind of link in /etc/systemd/system enabled
* show failure error string in "systemctl status"
* make sure timeouts are applied to Type=oneshot services.
* Maybe implement "systemctl mask" and "systemctl unmask", but not
document it? When doing that add switch to make this temporary by
placing mask links in /dev.
Consider moving the actual fs operations into systemd behind a D-Bus
interface, to make namespaces/containers/remote connections work properly.
* detect LXC environment
* invoke vhangup() before and after invoking getty
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=3c95c985fa91ecf6a0e29622bbdd13dcfc5ce9f1
* support "auto" and "comment=systemd.automount" at the same time for an fstab entry
* Maybe store in unit files whether a service should be enabled by default on package installation
(belongs into a distro pattern though, not in an upstream package's service file)
* perhaps add "systemctl reenable" as combination of "systemctl disable" and "systemctl enable"
* need a way to apply mount options of api vfs from systemd unit files
(or some other modern source?) instead of fstab
* maybe introduce ExecRestartPre=
* figure out what happened to bluez patch
* Patch systemd-fsck to use -C and pass console fd to it
* support remote/ssh systemctl/systemadm, and local privileged access → dbus patches need to be merged
* configurable jitter for timer events
* Support ProcessNeededForShutdown=true to allow stuff like mdmon
to be killed very late after the rootfs is read only (?)
* Integrate "mdadm --wait-clean". Maybe just let SIGTERM to mdmon trigger the
needed action
* dot output for --test showing the 'initial transaction'
* calendar time support in timer, iCalendar semantics for the timer stuff (RFC2445)
- check timerfd() patch: http://lkml.org/lkml/2010/11/23/290
* systemd --user
- get PR_SET_ANCHOR merged: http://lkml.org/lkml/2010/2/2/165
* add VT tracking:
- provide CK functionality
- start getty only when actual vt switch happens (same model as
socket on-demand activation). allocate the next free tty and
start a getty there. this way, pressing alt-f[1-12] will switch
through running X and getty sessions, and any unallocated
activated tty will start a new getty. the hardcoding of
getty[1-6] will entirely go away.
- http://git.kernel.org/?p=linux/kernel/git/gregkh/tty-2.6.git;a=commitdiff;h=fbc92a3455577ab17615cbcb91826399061bd789
* implicitly import "defaults" settings file into all types
* port over to LISTEN_FDS/LISTEN_PID:
- uuidd HAVEPATCH
- rpcbind (/var/run/rpcbind.sock!) HAVEPATCH
- cups HAVEPATCH
- postfix, saslauthd
- apache/samba
- libvirtd (/var/run/libvirt/libvirt-sock-ro)
- bluetoothd (/var/run/sdp! @/org/bluez/audio!)
- distccd
* fingerprint.target, wireless.target, gps.target, netdevice.target
* set_put(), hashmap_put() return values check. i.e. == 0 doesn't free()!
* io priority during initialization
* if a service fails too often, make the service enter failed mode, and the socket, too.
* systemctl list-jobs - show dependencies
* accountsservice is borked
* auditd service files
* add systemctl switch to dump transaction without executing it
* suspend, resume support?
* readahead: btrfs/LVM SSD detection
* add separate man page for [Install] settings
* allow runtime changing of log level and target
External:
* udisks should not use udisks-part-id, instead use blkid. also not probe /dev/loopxxx
* snd-seq should go, https://bugzilla.redhat.com/show_bug.cgi?id=676095
* gnome-shell python script/glxinfo/is-accelerated must die
* make cryptsetup lower --iter-time
* patch kernel for xattr support in /dev, /proc/, /sys and /sys/fs/cgroup.
* patch kernel for cpu feature modalias for autoloading aes/kvm/...
http://git.kernel.org/?p=linux/kernel/git/ak/linux-misc-2.6.git;a=shortlog;h=refs/heads/cpuid-match
(Rafael J. Wysocki's sysdev rework is on the way. After that CPUs can be exported a proper bus.)
* procps, psmisc, sysvinit-tools, hostname → util-linux-ng
https://bugzilla.redhat.com/show_bug.cgi?id=614245 -- plymouth
https://bugzilla.redhat.com/show_bug.cgi?id=612789 -- umount /cgroup on halt
https://bugzilla.redhat.com/show_bug.cgi?id=612728 -- /etc/rc.d/init.d/functions
https://bugzilla.redhat.com/show_bug.cgi?id=612712 -- pam_systemd
https://bugs.freedesktop.org/show_bug.cgi?id=29193 -- accountsservice
https://bugs.freedesktop.org/show_bug.cgi?id=29194 -- ConsoleKit
https://bugs.freedesktop.org/show_bug.cgi?id=29205 -- udisks
http://article.gmane.org/gmane.linux.bluez.kernel/6479 -- bluez
http://www.spinics.net/lists/linux-nfs/msg14371.html -- rpcbind
https://bugzilla.redhat.com/show_bug.cgi?id=617328 -- ntp
https://bugzilla.redhat.com/show_bug.cgi?id=617320 -- at
https://bugzilla.redhat.com/show_bug.cgi?id=617326 -- fprintd
https://bugzilla.redhat.com/show_bug.cgi?id=617333 -- yum
https://bugzilla.redhat.com/show_bug.cgi?id=617317 -- acpid
https://bugzilla.redhat.com/show_bug.cgi?id=617327 -- gpm
https://bugzilla.redhat.com/show_bug.cgi?id=617330 -- pcsc-lite
https://bugzilla.redhat.com/show_bug.cgi?id=617321 -- audit
https://bugzilla.redhat.com/show_bug.cgi?id=617316 -- abrt
Regularly:
* look for close() vs. close_nointr() vs. close_nointr_nofail()
* check for strerror(r) instead of strerror(-r)
* Use PR_SET_PROCTITLE_AREA if it becomes available in the kernel
* %m in printf() instead of strerror();
* pahole
* CFLAGS="-Wl,--gc-sections -Wl,--print-gc-sections -ffunction-sections -fdata-sections"