systemd/man/systemd.time.xml

<?xml version='1.0'?> <!--*-nxml-*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">

<!--
  This file is part of systemd.

  Copyright 2010 Lennart Poettering

  systemd is free software; you can redistribute it and/or modify it
  under the terms of the GNU Lesser General Public License as published by
  the Free Software Foundation; either version 2.1 of the License, or
  (at your option) any later version.

  systemd is distributed in the hope that it will be useful, but
  WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public License
  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->

<refentry id="systemd.time">

  <refentryinfo>
    <title>systemd.time</title>
    <productname>systemd</productname>

    <authorgroup>
      <author>
        <contrib>Developer</contrib>
        <firstname>Lennart</firstname>
        <surname>Poettering</surname>
        <email>lennart@poettering.net</email>
      </author>
    </authorgroup>
  </refentryinfo>

  <refmeta>
    <refentrytitle>systemd.time</refentrytitle>
    <manvolnum>7</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>systemd.time</refname>
    <refpurpose>Time and date specifications</refpurpose>
  </refnamediv>

  <refsect1>
    <title>Description</title>

    <para>In systemd, timestamps, time spans, and calendar events are
    displayed and may be specified in closely related syntaxes.</para>
  </refsect1>

  <refsect1>
    <title>Displaying Time Spans</title>

    <para>Time spans refer to time durations. On display, systemd will present time spans as a space-separated series
    of time values each suffixed by a time unit. Example:</para>

    <programlisting>2h 30min</programlisting>

    <para>All specified time values are meant to be added up. The above hence refers to 150 minutes. Display is
    locale-independent, only English names for the time units are used.</para>
  </refsect1>

  <refsect1>
    <title>Parsing Time Spans</title>

    <para>When parsing, systemd will accept the same time span syntax.
    Separating spaces may be omitted. The following time units are
    understood:</para>

    <itemizedlist>
      <listitem><para>usec, us</para></listitem>
      <listitem><para>msec, ms</para></listitem>
      <listitem><para>seconds, second, sec, s</para></listitem>
      <listitem><para>minutes, minute, min, m</para></listitem>
      <listitem><para>hours, hour, hr, h</para></listitem>
      <listitem><para>days, day, d</para></listitem>
      <listitem><para>weeks, week, w</para></listitem>
      <listitem><para>months, month, M (defined as 30.44 days)</para></listitem>
      <listitem><para>years, year, y (defined as 365.25 days)</para></listitem>
    </itemizedlist>

    <para>If no time unit is specified, generally seconds are assumed, but some exceptions exist and are marked as
    such. In a few cases <literal>ns</literal>, <literal>nsec</literal> is accepted too, where the granularity of the
    time span permits this. Parsing is generally locale-independent, non-English names for the time units are not
    accepted.</para>

    <para>Examples for valid time span specifications:</para>

    <programlisting>2 h
2hours
48hr
1y 12month
55s500ms
300ms20s 5day</programlisting>
  </refsect1>

  <refsect1>
    <title>Displaying Timestamps</title>

    <para>Timestamps refer to specific, unique points in time. On
    display, systemd will format these in the local timezone as
    follows:</para>

    <programlisting>Fri 2012-11-23 23:02:15 CET</programlisting>

    <para>The weekday is printed in the abbreviated English language form. The formatting is locale-independent.</para>

    <para>In some cases timestamps are shown in the UTC timezone instead of the local timezone, which is indicated via
    the <literal>UTC</literal> timezone specifier in the output.</para>

    <para>In some cases timestamps are shown with microsecond granularity. In this case the sub-second remainder is
    separated by a full stop from the seconds component.</para>
  </refsect1>

  <refsect1>
    <title>Parsing Timestamps</title>

    <para>When parsing, systemd will accept a similar syntax, but expects no timezone specification, unless it is given
    as the literal string <literal>UTC</literal> (for the UTC timezone) or is specified to be the locally configured
    timezone. Other timezones than the local and UTC are not supported. The weekday specification is optional, but when
    the weekday is specified, it must either be in the abbreviated (<literal>Wed</literal>) or non-abbreviated
    (<literal>Wednesday</literal>) English language form (case does not matter), and is not subject to the locale
    choice of the user.  Either the date, or the time part may be omitted, in which case the current date or 00:00:00,
    respectively, is assumed. The seconds component of the time may also be omitted, in which case ":00" is
    assumed. Year numbers may be specified in full or may be abbreviated (omitting the century).</para>

    <para>A timestamp is considered invalid if a weekday is specified and the date does not match the specified day of
    the week.</para>

    <para>When parsing, systemd will also accept a few special
    placeholders instead of timestamps: <literal>now</literal> may be
    used to refer to the current time (or of the invocation of the
    command that is currently executed). <literal>today</literal>,
    <literal>yesterday</literal>, and <literal>tomorrow</literal> refer to
    00:00:00 of the current day, the day before, or the next day,
    respectively.</para>

    <para>When parsing, systemd will also accept relative time
    specifications. A time span (see above) that is prefixed with
    <literal>+</literal> is evaluated to the current time plus the
    specified time span. Correspondingly, a time span that is prefixed
    with <literal>-</literal> is evaluated to the current time minus
    the specified time span. Instead of prefixing the time span with
    <literal>+</literal> or <literal>-</literal>, it may also be
    suffixed with a space and the word <literal>left</literal> or
    <literal>ago</literal>.</para>

    <para>Finally, a timespan prefixed with <literal>@</literal> is
    evaluated relative to the UNIX time epoch 1st Jan, 1970,
    00:00.</para>

    <para>Examples for valid timestamps and their normalized form
    (assuming the current time was 2012-11-23 18:15:22 and the timezone
    was UTC+8, for example TZ=Asia/Shanghai):</para>

    <programlisting>Fri 2012-11-23 11:12:13 → Fri 2012-11-23 11:12:13
    2012-11-23 11:12:13 → Fri 2012-11-23 11:12:13
2012-11-23 11:12:13 UTC → Fri 2012-11-23 19:12:13
             2012-11-23 → Fri 2012-11-23 00:00:00
               12-11-23 → Fri 2012-11-23 00:00:00
               11:12:13 → Fri 2012-11-23 11:12:13
                  11:12 → Fri 2012-11-23 11:12:00
                    now → Fri 2012-11-23 18:15:22
                  today → Fri 2012-11-23 00:00:00
              today UTC → Fri 2012-11-23 16:00:00
              yesterday → Fri 2012-11-22 00:00:00
               tomorrow → Fri 2012-11-24 00:00:00
               +3h30min → Fri 2012-11-23 21:45:22
                    -5s → Fri 2012-11-23 18:15:17
              11min ago → Fri 2012-11-23 18:04:22
            @1395716396 → Tue 2014-03-25 03:59:56</programlisting>

    <para>Note that timestamps displayed by remote systems with a non-matching timezone are usually not parsable
    locally, as the timezone component is not understood (unless it happens to be <literal>UTC</literal>).</para>

    <para>Timestamps may also be specified with microsecond granularity. The sub-second remainder is expected separated
    by a full stop from the seconds component. Example:</para>

    <programlisting>2014-03-25 03:59:56.654563</programlisting>

    <para>In some cases, systemd will display a relative timestamp (relative to the current time, or the time of
    invocation of the command) instead of or in addition to an absolute timestamp as described above. A relative
    timestamp is formatted as follows:</para>

    <programlisting>2 months 5 days ago</programlisting>

    <para>Note that a relative timestamp is also accepted where a timestamp is expected (see above).</para>
  </refsect1>

  <refsect1>
    <title>Calendar Events</title>

    <para>Calendar events may be used to refer to one or more points
    in time in a single expression. They form a superset of the
    absolute timestamps explained above:</para>

    <programlisting>Thu,Fri 2012-*-1,5 11:12:13</programlisting>

    <para>The above refers to 11:12:13 of the first or fifth day of
    any month of the year 2012, but only if that day is a Thursday or
    Friday.</para>

    <para>The weekday specification is optional. If specified, it
    should consist of one or more English language weekday names,
    either in the abbreviated (Wed) or non-abbreviated (Wednesday)
    form (case does not matter), separated by commas. Specifying two
    weekdays separated by <literal>..</literal> refers to a range of
    continuous weekdays. <literal>,</literal> and <literal>..</literal>
    may be combined freely.</para>

    <para>In the date and time specifications, any component may be
    specified as <literal>*</literal> in which case any value will
    match. Alternatively, each component can be specified as a list of
    values separated by commas. Values may also be suffixed with
    <literal>/</literal> and a repetition value, which indicates that
    the value itself and the value plus all multiples of the repetition value
    are matched.  Each component may also contain a range of values
    separated by <literal>..</literal>.</para>

    <para>A date specification may use <literal>~</literal> to indicate the
    last day(s) in a month. For example, <literal>*-02~03</literal> means
    "the third last day in February," and <literal>Mon *-05~07/1</literal>
    means "the last Monday in May."</para>

    <para>The seconds component may contain decimal fractions both in
    the value and the repetition. All fractions are rounded to 6
    decimal places.</para>

    <para>Either time or date specification may be omitted, in which
    case the current day and 00:00:00 is implied, respectively. If the
    second component is not specified, <literal>:00</literal> is
    assumed.</para>

    <para>A timezone specification is not expected, unless it is given as the literal string <literal>UTC</literal>, or
    the local timezone, similar to the supported syntax of timestamps (see above). Non-local timezones except for UTC
    are not supported.</para>

    <para>The special expressions
    <literal>minutely</literal>,
    <literal>hourly</literal>, <literal>daily</literal>,
    <literal>monthly</literal>, <literal>weekly</literal>,
    <literal>yearly</literal>,
    <literal>quarterly</literal>,
    <literal>semiannually</literal> may be used as
    calendar events which refer to
    <literal>*-*-* *:*:00</literal>,
    <literal>*-*-* *:00:00</literal>,
    <literal>*-*-* 00:00:00</literal>,
    <literal>*-*-01 00:00:00</literal>,
    <literal>Mon *-*-* 00:00:00</literal>,
    <literal>*-01-01 00:00:00</literal>,
    <literal>*-01,04,07,10-01 00:00:00</literal> and
    <literal>*-01,07-01 00:00:00</literal>, respectively.
    </para>

    <para>Examples for valid timestamps and their
    normalized form:</para>

<programlisting>  Sat,Thu,Mon..Wed,Sat..Sun → Mon..Thu,Sat,Sun *-*-* 00:00:00
      Mon,Sun 12-*-* 2,1:23 → Mon,Sun 2012-*-* 01,02:23:00
                    Wed *-1 → Wed *-*-01 00:00:00
           Wed..Wed,Wed *-1 → Wed *-*-01 00:00:00
                 Wed, 17:48 → Wed *-*-* 17:48:00
Wed..Sat,Tue 12-10-15 1:2:3 → Tue..Sat 2012-10-15 01:02:03
                *-*-7 0:0:0 → *-*-07 00:00:00
                      10-15 → *-10-15 00:00:00
        monday *-12-* 17:00 → Mon *-12-* 17:00:00
  Mon,Fri *-*-3,1,2 *:30:45 → Mon,Fri *-*-01,02,03 *:30:45
       12,14,13,12:20,10,30 → *-*-* 12,13,14:10,20,30:00
            12..14:10,20,30 → *-*-* 12..14:10,20,30:00
  mon,fri *-1/2-1,3 *:30:45 → Mon,Fri *-01/2-01,03 *:30:45
             03-05 08:05:40 → *-03-05 08:05:40
                   08:05:40 → *-*-* 08:05:40
                      05:40 → *-*-* 05:40:00
     Sat,Sun 12-05 08:05:40 → Sat,Sun *-12-05 08:05:40
           Sat,Sun 08:05:40 → Sat,Sun *-*-* 08:05:40
           2003-03-05 05:40 → 2003-03-05 05:40:00
 05:40:23.4200004/3.1700005 → 05:40:23.420000/3.170001
             2003-02..04-05 → 2003-02..04-05 00:00:00
       2003-03-05 05:40 UTC → 2003-03-05 05:40:00 UTC
                 2003-03-05 → 2003-03-05 00:00:00
                      03-05 → *-03-05 00:00:00
                     hourly → *-*-* *:00:00
                      daily → *-*-* 00:00:00
                  daily UTC → *-*-* 00:00:00 UTC
                    monthly → *-*-01 00:00:00
                     weekly → Mon *-*-* 00:00:00
                     yearly → *-01-01 00:00:00
                   annually → *-01-01 00:00:00
                      *:2/3 → *-*-* *:02/3:00</programlisting>

      <para>Calendar events are used by timer units, see
      <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>
      for details.</para>

  </refsect1>

  <refsect1>
      <title>See Also</title>
      <para>
        <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
        <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
        <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
        <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
        <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>
      </para>
  </refsect1>

</refentry>