There is some inconsistency, partially caused by the awkward naming
of the docs/ pages. But let's be consistent and use the "official" title.
If we ever change plural↔singular, we should use the same form everywhere.
This was a copy/paste mistae apparently, there's not "try_authtok" and
this was supposed to copy what Fedora uses, which uses "use_authtok"
correctly. Hence adjust this.
Fixes: #19369
This also updates the suggested PAM snippet in a number of way:
1. Be closer to the logic nowadays implemented in Fedora where the
auth/account/password stacks are all finished off with
pam_{deny|permit}.so
2. Make pam_unix.so just "sufficient" instead of "required" (paving
ground for pam_systemd_home.so being hooked in as additional
sufficient module.
3. Only do pam_nologin in the "account" stack, since it's about account
validity really.
4. Use modern parameters to pam_unix when changing passwords, i.e.
sha512 and shadow, and use already set up passwords (preparing ground
for pam_systemd_home again)
Allow earlier PAM modules to set `systemd.runtime_max_sec`. If they do,
parse it and set it as the `RuntimeMaxUSec=` property of the session
scope, to limit the maximum lifetime of the session. This could be
useful for time-limiting login sessions, for example.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #12035
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
1. Document the new desktop= parameter
2. Clarify that we set XDG_SESSION_DESKTOP, XDG_SESSION_CLASS,
XDG_SESSION_TYPE if we have the data, and don't just read it.
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Issue #6499 requests that a mention that those varibles can be set in the
environment is added. But the man page already says that. There isn't much
detail, but a man page does not need to and in this case should not include
all the details. Instead a note is added that those vars can be derived from
$DISPLAY.
Closes#6499.
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
Using "their" as pronoun in these places is confusing since it is more
associated with plural rather than singular, and the sentence already
contains a plural. The word "her/his" apparently offends some people,
hence let's avoid the problem altogether and just name the noun again.
The desktop brand is stored as DESKTOP variable for sessions. It can be
set arbitrarily by the session owner and identifies the desktop
environment that is running on that session.
It is annoying when we have dead links on fd.o.
Add project='man-pages|die-net|archlinux' to <citerefentry>-ies.
In generated html, add external links to
http://man7.org/linux/man-pages/man, http://linux.die.net/man/,
https://www.archlinux.org/.
By default, pages in sections 2 and 4 go to man7, since Michael
Kerrisk is the autorative source on kernel related stuff.
The rest of links goes to linux.die.net, because they have the
manpages.
Except for the pacman stuff, since it seems to be only available from
archlinux.org.
Poor gummiboot gets no link, because gummitboot(8) ain't to be found
on the net. According to common wisdom, that would mean that it does
not exist. But I have seen Kay using it, so I know it does, and
deserves to be found. Can somebody be nice and put it up somewhere?
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
This is initialized from XDG_SESSION_DESKTOP and is useful for GNOME
to recognize its own sessions. It's supposed to be set to a short string
identifying the session, such as "kde" or "gnome".
systemd_pam would ignore all params after the first invalid one.
Instead ignore just this one, and parse the rest. There's just
one now, but as a matter of principle ;)
Also, allow debug as an alias for debug=1, and don't treat
invalid debug= options as fatal.
Since cgroups are mostly now an implementation detail of systemd lets
deemphasize it a bit in the man pages. This renames systemd.cgroup(5) to
systemd.resource-control(5) and uses the term "resource control" rather
than "cgroup" where appropriate.
This leaves the word "cgroup" in at a couple of places though, like for
example systemd-cgtop and systemd-cgls where cgroup stuff is at the core
of what is happening.
Use proper grammar, word usage, adjective hyphenation, commas,
capitalization, spelling, etc.
To improve readability, some run-on sentences or sentence fragments were
revised.
[zj: remove the space from 'file name', 'host name', and 'time zone'.]
