MESON_INSTALL_QUIET is set when --quiet is passed to meson install.
Make sure we check the variable in our custom install scripts and
don't output anything if it is set.
This reverts commit c0443b97b7.
I got various cases wrong:
"usb:v04F3p2B7Cd5912dc00dsc00dp00ic03isc00ip00in00"
"usb:v0627p0001:QEMU USB Tablet"
"input:b0003v0627p0001e0001-e0,1,2,4,k110,111,112,r0,1,8,B,am4,lsfw"
OTOH:
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
is OK. Other parts follow after 'pn'.
-mouse:*:name:*Trackball*:*
-mouse:*:name:*trackball*:*
-mouse:*:name:*TrackBall*:*
+mouse:*:name:*Trackball*:
+mouse:*:name:*trackball*:
+mouse:*:name:*TrackBall*:
... and anything else with :name should be OK too, because our imports always
include ":" at the end:
IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'"
Including '*' at the end makes the pattern work even if we decide to add
something to the match string later.
Fixes#17499.
No functional change is intended.
The general pattern of changes:
-usb:v04F3p2B7C*
+usb:v04F3p2B7C:*
This is mostly a clarification, to make the part that makes the usb vXXXXpYYYY
part visually separated. It would only make a difference if we added further
keys with a different number of digits, which is unlikely.
-usb:v0627p0001:*QEMU USB Keyboard*
-usb:v0627p0001:*QEMU USB Mouse*
-usb:v0627p0001:*QEMU USB Tablet*
+usb:v0627p0001:*QEMU USB Keyboard*:*
+usb:v0627p0001:*QEMU USB Mouse*:*
+usb:v0627p0001:*QEMU USB Tablet*:*
Again, only a clarification. We know that ":" will appear somewhere later in
the match key, so anything that matches "…Keyboard*" will also match "…Keyboard*:*".
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
This makes the match narrower. Previously we would match product "N53SV"
and "N53SV2", "N53SV3", and others. Here we are saying that the ':pn' part must
match exactly. Most of the changes in this patch match this pattern. I made a few
judgement calls and used "pn…*:*" when I wasn't sure if the full pn is included:
-evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*
+evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*:*
-evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:
+evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:*
This more like the "QEMU" example above, since all dmi strings end in ":", so
anything which matches the old version will also match the new version.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:pvr*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:*
I replaced trailing ":pvr*" by ":*". This makes no functional difference because
we expect "pvr" to always appear in the dmi string. This makes patterns shorter.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*:*
OTOH, ":pn*" is kept. This is because almost patterns include ":pn*", and if we
skip it, we should make it clear that this is on purpose, that we really want to
match any product name.
The python script to generate autosuspend rules is updated to use ":*" too.
Inspired by https://github.com/systemd/systemd/pull/17281#discussion_r501489750.
The f'...' format was introduced in Python 3.6 ( https://www.python.org/dev/peps/pep-0498/ )
and returns an error when systemd is built on a system with an older Python3 version:
<...>
File /home/bluca/git/systemd/tools/make-autosuspend-rules.py, line 15
print(f'pci:v{vendor:08X}d{device:08X}*')
^
SyntaxError: invalid syntax
[2/388] Generating version.h with a custom command.
ninja: build stopped: subcommand failed.
$ python3 --version
Python 3.5.6
Use an older format to keep backward compatibility.
Concatenating strings is not a very efficient approach. And in this case fully
unnecessary. We also need some rules to make use of those hwdb entries.
PCI needs to be 8 characters, not 4. And we need to use uppercase hexadecimal
for both. With udev rules this made no difference, but hwdb match is case
sensitive.
Fixes#16119.
When directives-template.xml was created in 282230882c,
this generator started picking it up. Let's filter it out properly again,
and also simply the filter while at it.
I wasn't 100% convinced that this is the right thing to do, hence the separate
commit. But e.g. for paths we index all mentions, so I think it's reasonable to
do the same here.
The hack with getparent().txt is not very pretty, but the whole
thing seems to work well enough. It is useful to figure out whihc
specifiers are supported where.
In the beginning, it was rather short, and reasonable to include inline.
Now it is long and unwieldy, let's split it out.
While at it, let's reindent and wrap using our current standards.
The name of the helper didn't match the name of the meson target, which was
always confusing me. With this change, we consistenly use "update" to
re-generate things which we otherwise keep in vc, and "make" for things
which are generated during each build.
In a few cases, the prefix was originally necessary because a different helper
script was used for automake, and a different one for meson. But now we use
meson exclusively, and the prefix isn't useful. This also synchronizes the
target name, file name, and variable name in meson.build. The targets exposed
by meson didn't have the prefix, so the user interface is unchanged.
(The prefix is retained in the few tools that are used for meson itself,
e.g. meosn-vcs-tag.sh, meson-make-symlink.sh, etc.)
This commit looks for a new "extra-ref" attribute in <variablelist>
If this attribute is specified, its content will be index as pointing to
the current man-page in systemd.directives
So far, make-directive-index would look for
./valistentry/term/varname for elements to add to the directive man page.
This commit allows to specify xpath= in the varlist directive to tell
the generator what to look for.
So far the units there were being documented had only one custom interface.
But for the pid1 case, something more flexibile is needed. So let's add
an annotation in the page what we want to print, and filter in the generator.
Compares to gdbus output, the values of properties are replaced by ellipses.
For arrays and strings, the outer markers are kept. This is obviously also told
by the type string, but it seems a bit easier to read this way.
For any elements which are undocumented, a comment is inserted in sources.
"Undocumented" means that the expected element was not found. This might
require some adjustments if I missed some markup types.
Invocation is manual:
$ tools/update-dbus-docs.py tools/update-dbus-docs.py man/org.freedesktop.login1.xml
$ tools/update-dbus-docs.py tools/update-dbus-docs.py man/org.freedesktop.resolve1.xml
$ tools/update-dbus-docs.py tools/update-dbus-docs.py man/org.freedesktop.systemd1.xml
...
If some object is not found on the bus, the existing output is retained. So the
user needs to make sure that the appropriate objects have been instantiated
before calling this. We don't change the dbus interface very often, so I think
this manual mode is OK as a starting point. Making this fully automatic later
would be nice of course.
