This test runs in nspawn by default but will still run in qemu when
tests are run unprivileged so make sure we use UEFI if available to
avoid hangs when using the linux firmware.
Let's make this behave more like all the rest of the meson stuff.
This also is the first step to making it a bit more flexible so we
can define integration tests in different ways as will be seen in
the next commits.
Direct kernel boot results in much faster boot times so let's use
it by default.
We disable it for tests that need to reboot because +-50% of the
time, doing a reboot when using direct kernel boot causes qemu to
hang on reboot. Until we figure that out, let's use UEFI for the
tests that need to reboot.
CIs set QEMU and nspawn timeouts by themselves which reflect their needs
and possibilities, so let's respect that value, instead of using one
pre-set value which might or might not work for all of them.
Both Ubuntu CI and CentOS CI set these values themselves.
Specifying the test number manually is tedious and prone to errors (as
recently proven). Since we have all the necessary data to work out the
test number, let's do it automagically.
As in 2a5fcfae02
and in 3e67e5c992
using /usr/bin/env allows bash to be looked up in PATH
rather than being hard-coded.
As with the previous changes the same arguments apply
- distributions have scripts to rewrite shebangs on installation and
they know what locations to rely on.
- For tests/compilation we should rather rely on the user to have setup
there PATH correctly.
In particular this makes testing from git easier on NixOS where do not provide
/bin/bash to improve compose-ability.
Many tests were also masking systemd-machined.service. But machined
should only start when activated, so having it not masked shouldn't be
noticable. TEST-25-IMPORT needs it.
I *think* this was originally added to make it easier to see what was happening
in tests. Later we added the functionality to print the journal on failure, so
this redirection has stopped being useful.
In https://github.com/systemd/systemd/pull/13719#issuecomment-539292650
@filbranden shows that grep tries to write to stdout and fails. In general,
we should not assume that writing to the console it always possible. We have
special code to handle this in pid1 after all:
99 19:22:10.731965 fstat(1, <unfinished ...>
99 19:22:10.731993 <... fstat resumed>{st_mode=S_IFCHR|0620, st_rdev=makedev(0x88, 0), ...}) = 0
99 19:22:10.732070 write(1, "ExecStartPost={ path=/bin/echo ; argv[]=/bin/echo ${4_four_ex} ; ignore_errors=no ; start_time=[Mon 2019-10-07 19:22:10 PDT] ; stop_time=[Mon 209-10-07 19:22:10 PDT] ; pid=97 ; code=exited ; status=0 }\n", 203) = -1 EIO (Input/output error)
99 19:22:10.732174 write(2, "grep: ", 6) = -1 EIO (Input/output error)
99 19:22:10.732226 write(2, "write error", 11) = -1 EIO (Input/output error)
99 19:22:10.732263 write(2, ": Input/output error", 20) = -1 EIO (Input/output error)
99 19:22:10.732298 write(2, "\n", 1 <unfinished ...>
99 19:22:10.732325 <... write resumed>) = -1 EIO (Input/output error)
99 19:22:10.732349 exit_group(2) = ?
99 19:22:10.732424 +++ exited with 2 +++
Removing the redirection should make the tests less flakey.
Replaces #13719.
While at it, also drop NotifyAccess=all. I think it was added purposefully in
TEST-20-MAINPIDGAMES, and then cargo culted to newer tests.
These tests runs under qemu, and on some testbeds, without acceleration.
On those systems, the current 180 second overall test timeout is too
short to run the test.
Increasing the timeout to 600s should be enough, even for slow
non-accelerated qemu testbeds.
Almost all tests were manually mounting/unmounting $TESTDIR/root
from the loopback image; this moves all that into test-functions
so the test setup functions are simplier.
Also add test_setup_cleanup() function, to cleanup what is mounted
by create_empty_image_rootdir()
The `set -e` option is incompatible with a subshell/compound command,
which is followed by || <EXPR>. In such case, the -e option is ignored
in all affected subshells/functions (see man bash(1) for command `set`).
We had all kinds of indentation: 2 sp, 3 sp, 4 sp, 8 sp, and mixed.
4 sp was the most common, in particular the majority of scripts under test/
used that. Let's standarize on 4 sp, because many commandlines are long and
there's a lot of nesting, and with 8sp indentation less stuff fits. 4 sp
also seems to be the default indentation, so this will make it less likely
that people will mess up if they don't load the editor config. (I think people
often use vi, and vi has no support to load project-wide configuration
automatically. We distribute a .vimrc file, but it is not loaded by default,
and even the instructions in it seem to discourage its use for security
reasons.)
Also remove the few vim config lines that were left. We should either have them
on all files, or none.
Also remove some strange stuff like '#!/bin/env bash', yikes.
Ignore mkosi.builddir. In the future we can also add other patterns
if necessary.
run-intergration-tests.sh is updated to use the new script, and modified
to work from arbitrary directory.
Follow-up for #7494.
